WASD Configuration

11.Authorization Configuration (Basics)

WASD offers a comprehensive and versatile authentication and authorization environment. A little too comprehensive, often leaving the new administrator wondering where to begin. The role of this chapter is to provide a starting place, especially for sources of authentication, along with some basic configurations. Authentication and Authorization of WASD Features and Facilities contains a detailed explanation of all aspects. All examples here assume a standard installation and environment.

Just to clarify. Authentication is the verification of a user's identity, usually through username/password credentials. Authorization is allowing a certain action to be applied to a particular path based on that identity.

Changes to the authorization configuration file can be validated at the command-line before reload or restart. This detects and reports any syntactical and configuration errors but of course cannot check the intent of the rules.

If additional server startup qualifiers are required to enable specific authorization features then these must also be provided when checking. For example:

A server's currently loaded authorization rules may also be interrogated from the Server Administration menu (see Server Administration of WASD Features and Facilities).

11.1SYSUAF/Identifier Authentication

This setup allows any active account to authenticate using the local VMS username and password. By default not every account may authenticate this way, only those holding specified VMS rights identifiers. The examples provided in this section allows access to the WASD online Server Administration facility, and so may be followed specifically for that purpose, as well as serve as a general guide.

• Define the following logical before calling the server startup procedure. To make such a definition permanent add it to the system or Web environment startup procedures. This logical contains a startup qualifier that configures the server to allow authentication from the SYSUAF, using VMS rights identifiers (Authentication Policy of WASD Features and Facilities).
  $ DEFINE /SYSTEM WASD_STARTUP_SERVER "/SYSUAF=ID" $ @device:[WASD_ROOT.LOCAL]STARTUP.COM
  After a change to a command-line qualifier of the server such as the above it needs to be restarted using the following directive.
  $ HTTPD/DO=RESTART
• Decide on an identifier name. This can be an existing identifier, or one created for the purpose. For this example the identifier will be "WASD_WEBADMIN". Any identifier can be created using actions similar to the following example.
  $ SET DEFAULT SYS$SYSTEM $ MCR AUTHORIZE UAF> ADD /IDENTIFIER WASD_WEBADMIN
• Modify the authorization configuration file, accessed by the server using the system logical WASD_CONFIG_AUTH, to contain the following. This allows full access to the online Server Administration facility and [.LOCAL] directory (and no world access). Additional paths may be added as required, and of course multiple identifiers may be created and used for multiple realms and paths.
  ["Web Admin"=WASD_WEBADMIN=id] /httpd/-/admin/* r+w /wasd_root/local/* r+w
• The identifier must then be granted to those accounts allowed to authenticate in this way.
  $ SET DEFAULT SYS$SYSTEM $ MCR AUTHORIZE UAF> GRANT /IDENTIFIER WASD_WEBADMIN SYSTEM
• Using this approach useful discrimination may be exercised. For instance, one identifier for Web administrators, another (or others) for different authentication requirements.
  ["Web Admin"=WASD_WEBADMIN=id] /wasd_root/local/* r+w /httpd/-/admin/* r+w ["Area Access"=area-identifier-name=id] /web/area/* r+w ; r

  Of course the one account may hold multiple identifiers and so may have access to various areas.

  UAF> GRANT /IDENTIFIER WASD_WEBADMIN SYSTEM UAF> GRANT /IDENTIFIER area-identifier-name SYSTEM

  Using VMS rights identifiers allows significant granularity in providing access.

After Changes

If the WASD_CONFIG_AUTH configuration file is changed, or rights identifiers are granted or revoked from accounts, the server should be directed to reload the file and purge any cached authorization information.

11.2Other Authentication

Other sources of authentication are available, either by themselves or used in the same configuration file (different realms and paths) as those already discussed (Authentication Sources of WASD Features and Facilities). Non-SYSUAF sources do not require any startup qualifier to be enabled.

• ACME DOIs (Authentication and Credential Management Extension, Domains of Interpretation) may be used to authenticate requests.
  ["Whatever you want to call it!"=doi=ACME] /web/area/* r+w
• Simple lists contain usernames and unencrypted passwords. These are plain-text files, created and modified using any desired editor.
  ["Whatever you want to call it!"=list-name=list] /web/area/* r+w

  This is a very simple arrangement, with little inherent security. Lists are more useful when grouping names together for specifying which group may do what to where.

• HTA databases are WASD-specific, binary repositories of usernames, encrypted passwords, capabilities, user and other detail.
  ["Whatever you want to call it!"=HTA-database-name=HTA] /web/area/* r+w

  These databases may be administered using the online Server Administration facility (HTTPd Server Revise of WASD Features and Facilities). or the HTAdmin command-line utility (HTAdmin of WASD Features and Facilities). are quite secure and versatile.

• External agents are authentication and authorization scripts executed on demand, under the control-of but external to the server. It is possible for a site to write its own, custom authorization agent.
  ["Whatever you want to call it!"=agent-name=agent] /web/area/* r+w
  Two variations on a versatile LDAP authenticator and a CEL-compatible authenticator, along with example code is available in the WASD_ROOT:[SRC.AGENT] directory.
• X.509 establishes identity based on Public Key Infrastructure (PKI) authentication certificates. This is only available for SSL transactions.
  [X509] /web/area/* r+w
• RFC1413 IETF document describes an identification protocol that can be used as a form of authentication within this realm.
  ["Whatever you want to call it!"=RFC1413;A_PROJECT=list] /web/area/* r+w ; r

11.3Read and Write Groupings

WASD allows separate sources for groups of usernames to control read and write access in a particular realm (Realm, Full-Access, Read-Only of WASD Features and Facilities).

These groups may be provided via simple lists, VMS identifiers, HTA databases and authorization agents. The following example shows an identifier authenticated realm with full and read-only access controlled by two simple lists. For the first path the world has no access, for the second read-only access (with the read-only grouping becoming basically redundant information).

11.4Considerations

Multiple authentication sources (realms) may be configured in the one WASD_CONFIG_AUTH file.

Multiple paths may be mapped against a single authentication source.

Any path may be mapped only once (for any single virtual service).

Paths may have additional access restrictions placed on them, including client host name, username, etc. (Access Restriction Keywords of WASD Features and Facilities).

The configuration file is loaded and stored by the server at startup. If changed it must be reloaded to take effect. This can be done manually using

Authentication information is cached. Access subsequently removed or modified will not take effect until the entry expires, or is manually purged using

Failed attempts to authenticate against a particular source are limited. When this is exceeded access is always denied. If this has happened the cache must be manually purged before a user can successfully authenticate