TMSCP_LOAD

   TMSCP_LOAD allows the loading of the tape mass storage control
   protocol server software. The TMSCP_LOAD parameter also sets
   locally connected tapes served. For information about setting the
   TMSCP_LOAD parameter, see VSI OpenVMS Cluster Systems.

   Setting TMSCP_LOAD to 0 inhibits the loading of the tape server
   and the serving of local tapes. Setting TMSCP to 1 loads the
   tape server into memory at the time the system is booted and
   makes all directly connected tape drives available clusterwide.
   The following table describes the two states of the TMSCP_LOAD
   parameter:

   State  Function

   0      Do not load the TMSCP tape server. Do not serve any local
          tape devices clusterwide. This is the default value.

   1      Load the TMSCP tape server. Serve all local TMSCP tape
          devices clusterwide.

   TMSCP_LOAD is an AUTOGEN parameter.