Copyright Digital Equipment Corp. All rights reserved.
Qualifiers
/AFTER
/AFTER=time
/NOAFTER
Requests that the specified job be held until after a specific
time. If the specified time has already passed, the job is
scheduled for processing.
You can specify either absolute time or a combination of absolute
and delta times. For complete information on specifying time
values, see the OpenVMS User's Manual or the online help topic
Date.
NOTE
Releasing or rescheduling a job before its submission time
is not supported for security reasons. Therefore, if you set
the system time to a future time and submit a job on a node
where the queue manager is running, you cannot release or
reschedule that job back to the present time if you reset
the system time.
For example, you can set the system time to a future time of
January 1, 2020 and submit a job to run on January 9, 2020;
however, if you set the system time back to the present time
and try to release the job to the present time, the job will
be released to January 1, 2020.
This situation impacts the following qualifiers: /AFTER,
/NOHOLD, and /RELEASE.
To specify /AFTER for a job on hold, you must also specify
/NOHOLD in order to cause the job to be held only until the
specified time. Jobs can be released before the specified time
by using the /NOAFTER or /RELEASE qualifier with the SET ENTRY
command.
/BURST
/BURST
/NOBURST
Controls whether two file flag pages with a burst bar between
them are printed preceding each file in a job.
Use the /[NO]BURST qualifier to override the /DEFAULT qualifier
options that have been set for the output queue you are using.
The /[NO]BURST qualifier does not override the /SEPARATE
qualifier options set for the queue.
When you specify the /BURST qualifier for a file, the /[NO]FLAG
qualifier does not add or subtract a flag page from the two flag
pages that are printed preceding a file.
/CHARACTERISTICS
/CHARACTERISTICS=(characteristic[,...])
/NOCHARACTERISTICS
Specifies the name or number of one or more characteristics to be
associated with the job. Characteristics can refer to such things
as color of ink. If you specify only one characteristic, you can
omit the parentheses.
A characteristic's number must range from 0 to 127. To see which
characteristics have been defined for your system, use the SHOW
QUEUE/CHARACTERISTICS command. To see which characteristics
are associated with a particular queue, use the SHOW QUEUE/FULL
command.
A print job can be processed on an execution queue if none, some,
or all of the characteristics associated with the queue also are
associated with the job. That is, the job's characteristics must
be a subset of the queue's characteristics. However, if any of
the characteristics associated with the job are not associated
with the queue, the job remains pending until one or more of the
following occurs:
o The characteristics specified with the queue are changed
to make the job's characteristics a subset of the
queue's characteristics (using, for example, the SET
QUEUE/CHARACTERISTICS command).
o The characteristics specified with the job are changed
to make the job's characteristics a subset of the
queue's characteristics (using, for example, the SET
ENTRY/CHARACTERISTICS command).
o The job is moved to a queue on which all the job's
characteristics have been specified (using, for example, the
SET ENTRY/REQUEUE command).
o The job is deleted (using, for example, the DELETE/ENTRY
command).
/CLI
/CLI=filename
Specifies the name of a command language interpreter (CLI) to
use in processing the batch job. The file name specifies that
the CLI be SYS$SYSTEM:filename.EXE. If you do not specify the
/CLI qualifier, the job is run by the CLI specified in the user
authorization file (UAF), or whatever CLI was specified when the
job was originally submitted to the queue.
/COPIES
/COPIES=n
Specifies the number of copies to print. The value of n can be
any number from 1 to 255. When you use the /COPIES qualifier
with the SET ENTRY command, the number of copies can apply
only to the entire print job. You cannot use this qualifier to
specify different numbers of copies for individual files within a
multifile job.
/CPUTIME
/CPUTIME=time
Specifies a CPU time limit for the batch job. You can specify
the time parameter as delta time, the value 0, INFINITE, or NONE.
If the queue on which the job executes has a defined CPUMAXIMUM
value, the smaller of the specified job and queue values is used.
If the queue on which the job executes does not have a specified
maximum CPU time limit, the smaller of the SUBMIT command and
user authorization file (UAF) values is used. If the queue on
which the job executes does not have a specified maximum CPU time
limit and the UAF has a specified CPU time limit of NONE, either
the value 0 or the keyword INFINITE allows unlimited CPU time. If
you specify NONE, the specified queue or UAF value is used. CPU
time values must be greater than or equal to the number specified
by the system parameter PQL_MCPULM.
For information on specifying time values, see the OpenVMS User's
Manual or the online help topic Date.
/FEED
/FEED
/NOFEED
Controls whether form feeds are inserted into the print job when
the printer reaches the bottom margin of the form in use. You can
suppress this automatic form feed (without affecting any of the
other carriage control functions that are in place) by using the
/NOFEED qualifier.
When you use the /FEED qualifier with the SET ENTRY command, the
qualifier applies to all files in the print job. You cannot use
this qualifier to specify form feeds for individual files within
a multifile job.
/FLAG
/FLAG
/NOFLAG
Controls whether a flag page is printed preceding each file in a
print job. The flag page contains the name of the user submitting
the job, the job entry number, and other information about the
file being printed.
Use the /[NO]FLAG qualifier to override the installation-defined
defaults that have been set for the output queue you are using
or to override the qualifier specified in the PRINT command that
queued the job.
/FORM
/FORM=form
Specifies the name or number of the form to be associated with
the print job. If you omit the /FORM qualifier, the default form
for the execution queue is associated with the job.
Forms have attributes such as print image width and length or
paper stock, which the print symbiont associates with a job when
the job is processed. To see which forms have been defined for
your system, use the SHOW QUEUE/FORM command. To find out which
form is mounted currently on a particular queue and which form is
specified as that queue's default form, use the SHOW QUEUE/FULL
command.
The stock of the form associated with the job must match the
stock of the form mounted on the execution queue on which you
want the job to be processed. If the stocks do not match, the job
remains pending until one or more of the following occurs:
o A form with the same stock as the job's form is mounted on
the queue (using, for example, the SET QUEUE/FORM_MOUNTED
command).
o A form with the same stock as the queue's mounted form is
specified with the job (using, for example, the SET ENTRY/FORM
command).
o The job is moved to a queue on which the stock of the mounted
form matches the stock of the job's form (using, for example,
the SET ENTRY/REQUEUE command).
o The job is deleted (using, for example, the DELETE/ENTRY
command).
/HEADER
/HEADER
/NOHEADER
Controls whether a heading line is printed at the top of each
output page in a print job.
/HOLD
/HOLD
/NOHOLD
Controls whether the job is to be made available for processing
or held for processing later. If you specify the /HOLD qualifier,
the job is not released for processing until you enter SET
ENTRY/NOHOLD or SET ENTRY/RELEASE.
You can use the /NOHOLD qualifier to release jobs that have been
held for the following reasons:
o A job was submitted with the /HOLD qualifier.
o A completed job is being retained in a queue.
o A user-written symbiont has refused a job.
NOTE
Releasing or rescheduling a job before its submission time
is not supported for security reasons. Therefore, if you set
the system time to a future time and submit a job on a node
where the queue manager is running, you cannot release or
reschedule that job back to the present time if you reset
the system time.
For example, you can set the system time to a future time of
January 1, 2020 and submit a job to run on January 9, 2020;
however, if you set the system time back to the present time
and try to release the job to the present time, the job will
be released to January 1, 2020.
This situation impacts the following qualifiers: /AFTER,
/NOHOLD, and /RELEASE.
/JOB_COUNT
/JOB_COUNT=n
Requests that an entire print job be printed n times, where n
is a decimal integer from 1 to 255. This qualifier overrides the
/JOB_COUNT qualifier with the PRINT command.
/KEEP
/KEEP
/NOKEEP
Controls whether the batch job log file is deleted after it is
printed.
/LOG_FILE
/LOG_FILE[=filespec]
/NOLOG_FILE
Creates a log file with the specified file specification. You can
specify a different device name, as long as the process executing
the batch job has access to the device on which the log file will
reside. Logical names in the file specification are translated in
the context of the process that executes the SET ENTRY command.
If you omit the /LOG_FILE qualifier and specify the /NAME
qualifier, the log file is written to a file having the same file
name as that specified by the /NAME qualifier; the file type is
.LOG. When you omit the /LOG_FILE qualifier, the job-name value
used with the /NAME qualifier must be a valid file name.
/LOWERCASE
/LOWERCASE
/NOLOWERCASE
Indicates whether the print job must be printed on a printer that
can print both uppercase and lowercase letters. The /NOLOWERCASE
qualifier means that files can be printed on printers that print
only uppercase letters. If all available printers can print both
uppercase and lowercase letters, you do not need to specify the
/LOWERCASE qualifier.
/NAME
/NAME=job-name
Names the job. The job name must be 1 to 39 alphanumeric
characters. The SHOW ENTRY and SHOW QUEUE commands display the
job name. For batch jobs, the job name is also used for the batch
job log file. For print jobs, the job name is also used on the
flag page of the printed output.
The default job name is the name of the first file in the job.
/NOCHECKPOINT
For a batch job, erases the value established by the most
recently executed SET RESTART_VALUE command. For a print job,
clears the stored checkpoint so that the job will restart from
the beginning.
/NODELETE
Cancels file deletion for a job that was submitted with the
/DELETE qualifier. If you did not specify the /DELETE qualifier
when the job was originally submitted to the queue, you cannot
use the SET ENTRY command to establish file deletion at a later
time. You cannot use the /NODELETE qualifier to cancel deletion
of individual files in a multifile job.
/NOTE
/NOTE=string
Specifies a message of up to 255 characters to appear on the
flag page of the print job. Enclose messages containing lowercase
letters, blanks, or other nonalphanumeric characters (including
spaces) in quotation marks (" ").
/NOTIFY
/NOTIFY
/NONOTIFY
Controls whether a message notifies you when your job has been
completed or aborted. Notification is sent to any terminal
session on the same OpenVMS Cluster system to which you are
logged in.
/OPERATOR
/OPERATOR=string
Specifies a message string of up to 255 characters to be sent to
the operator just before the print job begins to print. Enclose
the message in quotation marks (" ") if it contains spaces,
special characters, or lowercase characters.
/PAGES
/PAGES=([lowlim,]uplim)
Specifies the number of pages to print for the specified job.
You can use the /PAGES qualifier to print portions of long files.
By default, all pages of the file are printed. When you use the
/PAGES qualifier with the SET ENTRY command, the qualifier can
apply only to an entire job. You cannot use this qualifier to
specify different numbers of pages to be printed for individual
files within a multifile job.
The lowlim specifier refers to the first page of the file that
you want to print. If you omit the lowlim specifier, the printing
starts on the first page of the file.
The uplim specifier refers to the last page of the file that you
want to print. When you want to print to the end of the file but
do not know how many pages are in the file, use quotation marks
(" ") as the uplim specifier.
You can omit the parentheses when you specify only a value
for the uplim specifier. For example, /PAGES=10 prints the
first 10 pages of the file; /PAGES=(5,10) prints pages 5 to 10;
/PAGES=(5,"") starts printing at page 5 and continues until the
end of the file is reached.
/PARAMETERS
/PARAMETERS=(parameter[,...])
Specifies from one to eight optional parameters to be passed to
the job. Each parameter can have as many as 255 characters. If
you specify only one parameter, you can omit the parentheses.
To specify a parameter that contains any special characters or
delimiters, enclose the parameter in quotation marks.
For batch jobs, the parameters define values to be equated to the
symbols named P1 to P8 in each command procedure in the job. The
symbols are local to the specified command procedures.
/PASSALL
/PASSALL
/NOPASSALL
Specifies whether the symbiont bypasses all formatting of the
print job and sends the output QIO to the driver with format
suppressed. All qualifiers affecting formatting, as well as the
/HEADER, /PAGES, and /PAGE_SETUP qualifiers, are ignored.
When you use the /PASSALL qualifier with the SET ENTRY command,
the qualifier applies to the entire job. You cannot use this
qualifier to specify PASSALL mode for individual files within a
multifile job.
/PRINTER
/PRINTER[=queue-name]
/NOPRINTER
Queues the batch job log file for printing when the job is
completed. The default output queue for the log file is
SYS$PRINT. The /PRINTER qualifier allows you to specify an output
queue. The /NOPRINTER qualifier assumes the /KEEP qualifier.
/PRIORITY
/PRIORITY=n
Requires OPER (operator) or ALTPRI (alter priority) privilege
to raise the priority above the value of the queue's maximum
scheduling priority.
Specifies the job-scheduling priority of the job. The value of
n is an integer in the range of 0 to 255, where 0 is the lowest
priority and 255 is the highest.
The default value for the /PRIORITY qualifier is the value of
the system parameter DEFQUEPRI. No privilege is needed to set the
priority lower than the queue's maximum scheduling priority.
/RAD
/RAD=n (Alpha/Integrity servers)
Specifies the RAD number on which the submitted batch job is to
execute.
When a job is submitted to a batch queue that does not have a
RAD setting, the job will execute using the RAD specified. If the
batch queue has a RAD setting, the job will execute using the RAD
specified on the queue.
RAD is supported on AlphaServer GS series systems and starting
from OpenVMS Version 8.4, support is extended to NUMA capable
Integrity servers.
/RELEASE
You can use the /RELEASE qualifier to release jobs that have been
held for the following reasons:
o A job was submitted with the /AFTER qualifier.
o A job was submitted with the /HOLD qualifier.
o A completed job is being retained in a queue.
o A user-written symbiont has refused a job.
NOTE
Releasing or rescheduling a job before its submission time
is not supported for security reasons. Therefore, if you set
the system time to a future time and submit a job on a node
where the queue manager is running, you cannot release or
reschedule that job back to the present time if you reset
the system time.
For example, you can set the system time to a future time of
January 1, 2020 and submit a job to run on January 9, 2020;
however, if you set the system time back to the present time
and try to release the job to the present time, the job will
be released to January 1, 2020.
This situation impacts the following qualifiers: /AFTER,
/NOHOLD, and /RELEASE.
/REQUEUE
/REQUEUE=queue-name[:]
Requests that the job be moved from the original queue to the
specified queue.
/RESTART
/RESTART
/NORESTART
Specifies whether a batch or print job is restarted after a
system failure or a STOP/QUEUE/REQUEUE command.
/RETAIN
/RETAIN=option
Specifies the circumstances under which you want your jobs to be
retained in a queue. When a job is retained in the queue, you can
issue the SHOW QUEUE command after the job completes to see the
status of the job. Without job retention, no record of a job is
left in a queue after a job completes.
Use the following options to specify job retention:
o ALWAYS-Holds the job in the queue regardless of the job's
completion status.
o DEFAULT-Holds the job in the queue as specified by the queue's
retention policy.
o ERROR-Holds the job in the queue only if the job completes
unsuccessfully.
o UNTIL=time-value--Holds the job in the queue for the specified
length of time, regardless of the job's completion status.
NOTE
You cannot specify a /NORETAIN qualifier with the SET
ENTRY command (as system managers can with the commands
INITIALIZE/QUEUE, START/QUEUE, and SET QUEUE); however, you
can specify /RETAIN=DEFAULT with the SET ENTRY command. The
default option holds the job in the queue as specified by
the queue's retention policy. If the system manager has not
specified retention for the queue, the job is not retained.
How Job Retention Is Determined
Although you can specify job retention options for your own jobs,
the job retention option you specify may be overridden by the job
retention option of the queue on which your job executed. If you
submit or print a job to a generic queue, the generic queue's job
retention setting may also override the job retention option you
specify. This section describes how job retention is determined.
An execution queue's job retention setting takes precedence
over a generic queue's job retention setting; however, if the
job's completion status does not match the job retention setting
(if any) on the execution queue, then the generic queue's job
retention setting attempts to control job retention. If the job's
completion status does not match the job retention setting (if
any) on the generic queue, then the user-specified job retention
setting is used. Jobs submitted directly to execution queues are
not affected by job retention settings on generic queues.
If the execution queue's retention setting applies, the job is
retained on the execution queue. Likewise, if the generic queue's
retention setting applies, the job is retained on the generic
queue. If the user-specified setting applies, the job is retained
in the queue to which it was submitted.
The following example illustrates how the queue manager
determines job retention:
Suppose you submit a job to a generic queue and specify
/RETAIN=ALWAYS, and the job completes successfully.
First, the queue manager compares the job's completion status
to the execution queue's retention setting. Suppose the queue
is set with /RETAIN=ERROR (retains only jobs that complete
unsuccessfully). The job is not retained in the execution queue
because the error condition was not met.
Second, the queue manager compares the job's completion status to
the generic queue's retention setting. Suppose the generic queue
has no retention setting. The queue manager's comparison again
fails to retain the job.
Finally, the queue manager compares the job's completion
status to the retention setting you specified for the job. This
comparison reveals that the job should be retained. Because the
user-specified setting leads the queue manager to retain the job,
the job is held in the queue to which the job was submitted-in
this case, the generic queue.
For more information on types of queues, see the INITIALIZE/QUEUE
command. For more information on setting retention options for
queues, see the INITIALIZE/QUEUE, START/QUEUE, or SET QUEUE
command.
Timed Retention
Timed retention, which you specify using the UNTIL=time-value
option, allows you to retain a job in the queue only as long as
you need it. This eliminates the need to delete the job from the
queue later.
For example, the following command retains job 172 in the queue
until 7:31 on April 19, when the job will automatically be
deleted from the queue.
$ SET ENTRY/RETAIN=UNTIL=19-APR-2001:07:31:0.0 172
However, depending on the queue's job retention policy, the
job might be retained indefinitely. The job retention policy
set on the queue takes precedence over the user-specified job
retention setting. Because system managers cannot specify timed
job retention for a queue, any jobs retained as a result of a
queue's setting are retained indefinitely.
If you specify the /RETAIN=UNTIL=time-value option, you must
supply a time value. The time value is first interpreted as
a delta time, then as a combination time, and finally as
absolute time. If you specify a delta time, the delta begins
when the job completes. For example, if you specify SET
ENTRY/RETAIN=UNTIL="+3:00", the job will be retained for three
hours after the job completes. For information on specifying time
values, see the OpenVMS User's Manual.
/SETUP
/SETUP=module[,...]
Extracts the specified modules from the device control library
(containing escape sequence modules for programmable printers)
and copies the modules to the printer before each file in a print
job is printed.
When you use the /SETUP qualifier with the SET ENTRY command, the
qualifier applies to the entire print job. You cannot use this
qualifier to specify different setup modules for individual files
within a multifile job.
/SPACE
/SPACE
/NOSPACE
Controls whether the output of a print job is double-spaced.
Specifying the /NOSPACE qualifier causes the output to be single-
spaced. When you use the /SPACE qualifier with the SET ENTRY
command, the qualifier applies to the entire job. You cannot use
this qualifier to specify different spacing for individual files
within a multifile job.
/TRAILER
/TRAILER
/NOTRAILER
Controls whether a trailer page is printed at the end of each
file in a print job. The trailer page displays the entry number,
as well as information about the user submitting the job and the
files being printed.
When you use the /TRAILER qualifier with the SET ENTRY command,
trailer pages are placed at the end of each file in a multifile
job.
Use the /[NO]TRAILER qualifier to override the installation-
defined defaults that have been set for the output queue you are
using or the qualifier specified in the PRINT command that queued
the job.
/WSDEFAULT
/WSDEFAULT=n
Defines, for a batch job, a working set default, which is the
default number of physical pages that the job can use.
If the queue on which the job executes has a nonzero default
working set, the smaller of the specified job and queue values
is used. If the queue on which the job executes has a working set
default of zero, the smaller of the specified job value and the
value established in the user authorization file (UAF) is used.
Specify the value of n as a number of 512-byte pagelets on
Alpha. Note that the operating system rounds up this value to the
nearest CPU-specific page so that the actual amount of physical
memory allowed may be larger than the specified amount on Alpha.
If you specify zero or NONE, the specified queue or UAF value is
used. Working set default values must range between the numbers
specified by the system parameters PQL_MWSDEFAULT and WSMAX.
/WSEXTENT
/WSEXTENT=n
Defines, for the batch job, a working set extent, which is the
maximum amount of physical memory that the job can use. The job
uses the maximum amount of physical memory only when the system
has excess free pages. If the queue on which the job executes has
a nonzero working set extent, the smaller of the specified job
and queue values is used. If the queue on which the job executes
has a working set extent of zero, the smaller of the specified
job value and the value established in the user authorization
file (UAF) is used.
Specify the value of n as a number of 512-byte pagelets on
Alpha. Note that the operating system rounds up this value to the
nearest CPU-specific page so that the actual amount of physical
memory allowed may be larger than the specified amount on Alpha.
If you specify zero or NONE, the specified queue or UAF value is
used. Working set extent values must range between the numbers
specified by the system parameters PQL_MWSEXTENT and WSMAX.
/WSQUOTA
/WSQUOTA=n
Defines, for the batch job, a working set quota, which is the
amount of physical memory that the job is guaranteed. If the
queue on which the job executes has a nonzero working set quota,
the smaller of the specified job and queue values is used. If the
queue on which the job executes has a working set quota of zero,
the smaller of the specified job value or the value established
in the user authorization file (UAF) is used.
Specify the value of n as a number of 512-byte pagelets on
Alpha. Note that the operating system rounds up this value to the
nearest CPU-specific page so that the actual amount of physical
memory allowed may be larger than the specified amount on Alpha.
If you specify zero or NONE, the specified queue or UAF value
is used. Working set quota values must range between the numbers
specified by the system parameters PQL_MWSQUOTA and WSMAX.