Examples

   1.$ SET DEVICE/SPOOLED=(LPA0)  LPA0:

     In this example, the /SPOOLED qualifier requests that the
     printer queue LPA0 be spooled to an intermediate disk before
     files directed to the disk are printed. Because no intermediate
     disk was specified, the intermediate disk defaults to SYS$DISK.

   2.$ SET DEVICE/ERROR_LOGGING  DKB2:

     The SET DEVICE command in this example requests that all device
     errors reported on device DKB2 be logged in the error log file.

   3.$ SET DEVICE/NOAVAILABLE DRA0:

     The SET DEVICE command in this example prevents any attempt to
     mount a disk on device DRA0.

   4.$ SET DEVICE/DUAL_PORT DRA0:

     The SET DEVICE command in this example enables the dual port
     seize logic in device DRA0.

   5.$ SET DEVICE/PREFERRED_CPU=1 PNA0

     The Fast Path port PNA0 is assigned to CPU 1, and the User
     Preferred CPU is set to 1.

   6.$ SET DEVICE/NOPREFERRED_CPU  PNA0

     The port PNA0 will have the User Preferred CPU cleared,
     but will remain a Fast Path port, with CPU 1 as its current
     preferred CPU.

   7.$ SET DEVICE/PREFERRED_CPU=(0,1,2)  PNA0

     The operating system selects CPU 0,1, or 2 as the preferred CPU
     for Fast Path port PNA0, and sets its User Preferred CPU to the
     selected CPU.

   8.$ SET DEVICE $1$DGA1001:/PATH=PGB0.0123-4567-89AB-CDEF/ENABLE

     In this example, a request is made to enable path
     PGB0.0123-4567-89AB-CDEF as a switch path destination. No error
     is indicated if the path was in the enabled state prior to the
     request. Had the /NOENABLE option been used, the path would
     have been removed from switch path consideration.

   9.$ SET DEVICE $1$DGA1001:/PATH=PGB0.0123-4567-89AB-CDEF/POLL

     In this example, a request is made to enable path
     PGB0.0123-4567-89AB-CDEF for polling of its continued
     availability as a path switch destination. Had the /NOPOLL
     option been used, the path would have been removed from path
     availability polling consideration.

   10$ SET DEVICE $1$DGA1001:/PATH=PGB0.0123-4567-89AB-CDEF/SWITCH

     In this example, a request is made to switch from the current
     path to path PGB0.0123-4567-89AB-CDEF. Should the path fail,
     the switch algorithm of the unspecified path is used.

   11$ ! Command sequence used on system 1 at site 1:
     $ MOUNT/SYSTEM DSA0:/SHADOW=($1$DGA0:,$1$DGA1:) TEST
     $ SET DEVICE/SITE=1  DSA0:
     $ !
     $ ! Command sequence used on system 2 at site 2:
     $ MOUNT/SYSTEM DSA0:/SHADOW=($1$DGA0:,$1$DGA1:) TEST
     $ SET DEVICE/SITE=2  DSA0:
     $ !
     $ ! Commands used on both system 1 and system 2:
     $ SET DEVICE/SITE=1  $1$DGA0:
     $ SET DEVICE/SITE=2  $1$DGA1:

     In this example, the system at site 1 will perform all reads
     from $1$DGA0, which is the physically local disk, while the
     system at site 2 will perform all reads from its physically
     local disk, $1$DGA1.