MUSL_Verification

 Verifying a MUSL Configuration

 You can use MRU to verify a successful Multi-Unit, Single LUN
 (MUSL) configuration. Use the SHOW ROBOT command to get information
 about the configuration:

 $robot show robot Scsi2:B0T2L2

 Robot Name : Scsi2:B0T2L2 Type: SCSI

 Media Robot Identifier: DEC     TL820   (C)     DEC2A5A

 Slots:          176
 Drives:         6
 Inports:        1
 Outports:       1
 Transports:     2

 MUSL control is available on firmware 2A5A or higher. This
 information appears on the Media Robot Identifier line of the SHOW
 ROBOT output.

 When MUSL is activated, the combined hardware units respond to a
 single medium changer unit. MRU shows this with a Transport count
 greater than 1.