Direct_Connect_SCSI_Devices

 Use the following procedure to create a tape robot unit:

 1. For SCSI magazine loaders connected directly to an
 SCSI bus, enter the SYSGEN or SYSMAN command in the
 appropriate format:

 VAX system:

     $ MCR SYSGEN CONNECT GKannn:/DRIVER=GKDRIVER/NOADAPTER

 Alpha system:

     $ MCR SYSMAN IO CONNECT GKannn:/DRIVER=SYS$GKDRIVER/NOADAPTER

 Where:  GKannn: is the robot device name. The robot device
 name for a loader is always the same as the tape drive name
 incremented by one, and without any prefixes (allocation
 class or NODE$ prefix) to the GK string. For example, a
 tape drive name of $1$MKA200: could use a robot device
 name of GKA201:.

 2. Compaq recommends that you include the SYSGEN
 commands in your system startup command procedure.