Qualifiers

/REPLY
   Requests a reply to the message and issues a unique
   identification number to which the operator sends the response.
   The system displays a message that the operator has been
   notified; you cannot enter any commands until the operator
   responds. If you press Ctrl/C before the operator responds, you
   can then enter another message to the operator, or press Ctrl/Z
   to cancel the request.


/TO
      /TO=(operator[,...])

   Specifies one or more operators to whom you want to send the
   message. Possible keywords are as follows:

   CARDS              Sends the message to operators designated to
                      respond to card reader requests.

   CENTRAL            Sends the message to the central system
                      operator.

   CLUSTER            Sends the message to operators designated to
                      respond to cluster-related requests.

   DEVICES            Sends the message to operators who mount and
                      dismount disks.

   DISKS              Sends the message to operators who mount and
                      dismount disk volumes.

   NETWORK            Sends the message to the network operator.

   OPER1 to OPER12    Sends the message to operators identified as
                      OPER1 to OPER12.

   PRINTER            Sends the message to operators designated to
                      handle print requests.

   SECURITY           Sends the message to operators designated to
                      respond to security-related requests.

   TAPES              Sends the message to operators designated to
                      mount and dismount tape volumes.