SIDES

   SIDES=sides-layout-value

   Specifies whether your job will print on one or two sides of a sheet,
   and whether it will print in tumble mode. Sides-layout-value can be:

   1, ONE, or           Your job is printed on one side of the sheet.
   ONE_SIDED_SIMPLEX

   2, TWO, or           Your job is printed on both sides of a sheet.
   TWO_SIDED_DUPLEX

   TUMBLE or            Your job is printed on both sides of the sheet,
   TWO_SIDED_TUMBLE     and alternating pages are rotated 180°.

   ONE_SIDED_DUPLEX     Your job prints on one side of the sheet.
                        This setting reflects the placement of
                        margins.

   ONE_SIDED_TUMBLE     Your job prints on one side of the sheet.
                        Alternating pages are rotated 180°.  This
                        setting reflects the placement of margins.

   TWO_SIDED_SIMPLEX    Your job is printed on both sides of a sheet.
                        This setting does not reflect the placement of
                        margins.

   The SIDES command is overridden if the file contains an operator that
   sets the duplex value.

Additional information available:

Compaq_printers DIGITAL_printers                GENICOM_printers
HP_printers     IBM_printers    Lexmark_printers
Tektronix_printers              Xerox_printers