Qualifiers

 

/ALL
   Shows all devices that match device name.
 

/CHARACTERISTICS
      /CHARACTERISTICS or PARAMETERS

   Displays status and related information about the device.
 

/COUNTERS
   Displays device counters.
 

/DLL
      /DLL or MOPDLL

   Displays LAN volatile device database information related to MOP
   downline load for the device.
 

/INTERNAL_COUNTERS
   Displays internal counters. By default, it does not display zero
   counters. To see all counters, including zero, use the additional
   qualifier /ZERO. To see the debug counters, use the additional
   qualifier /DEBUG.
 

/MAP
   Displays the current configuration of the functional address
   mapping table.
 

/MESSAGES
   Displays the console messages displayed by the LAN driver as part
   of the LAN driver internal counters. This qualifier is included
   for convenience, to avoid scanning the internal counters to get
   to the message data.
 

/OUTPUT
      /OUTPUT=file-name

   Creates the specified file and directs output to it.
 

/REVISION
   Displays the current LAN driver and device revision information,
   if available or applicable. Not all LAN drivers maintain revision
   information.
 

/SR_ENTRY
   Displays the contents of the current Token Ring source routing
   cache table.
 

/TRACE
   Displays LAN driver trace data.
 

/VLAN
   Displays a list of IEEE 802.1Q tags that are configured on the
   switch port connected to the specified physical LAN device.
   LANCP listens for the GVRP (GARP (Generic Attribute Registration
   Protocol) VLAN Registration Protocol) packets that contain the
   configuration information and displays the configured tags.

   The switch periodically sends GVRP packets to provide VLAN
   configuration information in compliance with the IEEE 802.1Q
   specification. If GVRP is not configured on the switch, or if the
   LAN device is not connected to a switch, this command displays
   only the list of tags that the VLAN driver has configured.