Commands

   This section describes and provides examples of the LANCP
   commands. The following table summarizes the LANCP commands:

   Command                     Function

   @ (Execute Procedure)       Executes a command procedure.
   CLEAR DEVICE                Deletes device data from the LAN
                               volatile device database.
   CLEAR DLL or CLEAR MOPDLL   Clears MOP downline load counters for
                               all nodes and devices.
   CLEAR NODE                  Deletes a node from the LAN volatile
                               node database.
   CONNECT NODE                Connects to a LAN device, such as a
                               terminal server, that implements a
                               management interface using the MOP
                               console carrier protocol.
   CONVERT DEVICE_DATABASE     Converts the device database to
                               the format required by the current
                               version of LANCP.
   CONVERT NODE_DATABASE       Converts the node database to the
                               format required by the current
                               version of LANCP.
   DEFINE DEVICE               Enters a device into the LAN
                               permanent device database or modifies
                               an existing entry.
   DEFINE NODE                 Enters a node into the LAN permanent
                               node database or modifies an existing
                               entry.
   EXIT                        Stops execution of LANCP and returns
                               control to the DCL command level.
   HELP                        Provides online help information
                               about the LANCP utility.
   LIST DEVICE                 Displays information in the LAN
                               permanent device database.
   LIST NODE                   Displays information in the LAN
                               permanent node database.
   PURGE DEVICE                Deletes device data from the LAN
                               permanent device database.
   PURGE NODE                  Deletes a node from the LAN permanent
                               node database.
   SET ACP                     Modifies the operation of the LANACP
                               LAN Server process.
   SET DEVICE                  Enters a device into the LAN volatile
                               device database or modifies an
                               existing entry and sets device
                               parameters.
   SET NODE                    Enters a node into the LAN volatile
                               node database or modifies an existing
                               entry.
   SHOW ACP                    Displays currently set LANCP and
                               LANACP options.
   SHOW CONFIGURATION          Displays a list of LAN devices on the
                               system.
   SHOW DEVICE                 Displays information in the LAN
                               volatile device database and displays
                               device data.
   SHOW DLL or SHOW MOPDLL     Displays the current state of MOP
                               downline load services.
   SHOW LOG                    Displays recent downline load
                               activity.
   SHOW NODE                   Displays information in the LAN
                               volatile node database.
   SPAWN                       Creates a subprocess of the current
                               process.
   TRIGGER NODE                Issues a request to reboot to a
                               remote node.
   UPDATE DEVICE               Updates a device, primarily to issue
                               a reset to it.