Example

 $ CREATE COUNT.COM
 SHOW DEVICE/COUNTERS EIA
 SPAWN WAIT 00:01:00
 @COUNT
<Ctrl/Z>

 $ RUN SYS$SYSTEM:LANCP
 LANCP> @COUNT

 Device Counters EIA0:
    Value  Counter
    -----  -------
    62030 Seconds since last zeroed
 19910982 Bytes received
   239192 Bytes sent
   155812 Packets received
     4348 Packets sent
 19910982 Multicast bytes received
   239140 Multicast bytes sent
   155812 Multicast packets received
     4346 Multicast packets sent
        0 Unrecognized unicast destination packets
   134311 Unrecognized multicast destination packets
        0 Unavailable station buffers
        0 Unavailable user buffers
        0 Alignment errors
        0 Frame check errors
        0 Frame size errors
        0 Frame status errors
        0 Frame length errors
        0 Frame too long errors
        0 Data overruns
        0 Send data length errors
        0 Receive data length errors
        0 Transmit underrun errors
        0 Transmit failures
        0 Carrier check failures
        0 Station failures
        0 Initially deferred packets sent
        0 Single collision packets sent
        0 Multiple collision packets sent
        0 Excessive collisions
        0 Late collisions
        0 Collision detect check failures
        1 Link up transitions (19-OCT-2004 13:47:50.86)
        0 Link down transitions
     None Time of last generic transmit error
     None Time of last generic receive error

     This example creates and runs a command procedure, COUNT.COM,
     that displays device counters once every minute.