VMS Help  —  SET  SERVER

1  –  ACME_SERVER

    Valid for Alpha and Integrity server systems only.

    Controls the ACME server.

    Requires SYSPRV privilege.

    Format

      SET SERVER ACME_SERVER

1.1  –  Qualifiers

1.1.1    /ABORT

    Forces the ACME_SERVER process to terminate without graceful
    shutdown of ACME agents. Pending requests are cancelled.

    This command can be used if a malfunctioning ACME agent prevents
    a graceful shutdown.

1.1.2    /CANCEL

    Cancels pending dialogue requests. Pending dialogue requests
    are outstanding requests to SYS$ACM callers to supply dialogue
    response data. Active requests being serviced by the ACME_SERVER
    process are allowed to complete normally.

    Can be used only if the /EXIT or /DISABLE qualifier is also
    specified.

1.1.3    /CLUSTER

    Issues the SET command to each ACME server in the cluster.

1.1.4    /CONFIGURE

       /CONFIGURE=(NAME=name [,CREDENTIALS=credentials]
       [,FACILITY=facility] [,FILE=file] [,THREAD_MAX=n][,...])

    Dynamically loads an ACME agent. An ACME agent is a shareable
    image that conforms to the ACME agent plug-in interface
    specification.

    By default, the ACME server looks for an ACME agent file named
    prefix$name_ACMESHR.EXE, where the prefix is VMS by default
    and name is the case-insensitive string specified by the NAME
    keyword. The prefix can be overridden by the FACILITY keyword.
    Otherwise, a complete file specification can be specified with
    the FILE keyword.

    You must specify the CREDENTIALS keyword if the ACME agent is a
    domain of interpretation (DOI) agent capable of authenticating
    users and issuing credentials. The CREDENTIALS keyword specifies
    the name of the persona extension associated with the ACME
    agent (see the $PERSONA_EXTENSION_LOOKUP system service). The
    credentials name must match the name registered by the executive
    loadable image that implements the persona extension. For
    credentials other than "VMS", see the documentation provided
    for the ACME agent and the specific persona extension.

    A maximum of eight ACME agents can be configured.

    THREAD_MAX Keyword: Usage Considerations

    An ACME server worker thread is the authentication request
    processing thread of execution. The number of worker threads
    determines the number of authentication requests the ACME server
    can process simultaneously.

    The ACME server assigns a request slot to each in-progress
    authentication request. The total number of request slots sets
    a limit on the maximum number of requests the ACME server can
    have outstanding.

    The ACME server limits the number of unprivileged authentication
    requests it can accept for processing to half the total number of
    request slots.

    If a process makes a call to $ACM and no request slots are
    available, the process remains in resource wait state until a
    request slot becomes free.

    The number of ACME server worker threads can range from 1 to 32.
    The default of 4 satisfies most operating environments in which
    authentication processing time is largely spent waiting for I/O.
    You may, however, be able to improve throughput by increasing the
    number of worker threads if, for example, you have a user-written
    ACME agent that requires more CPU time than most.

    You can set the maximum number of ACME server worker threads
    before you start or restart the server by defining the inner-mode
    logical name ACME$THREAD_MAXIMUM in the systemwide logical name
    table. For example:

    $ DEFINE/SYSTEM/EXECUTIVE_MODE ACME$THREAD_MAXIMUM 8

    You can also use the CONFIGURE qualifier to set the maximum
    number of server worker threads before you enable the ACME
    server. For example:

    $ SET SERVER ACME /CONFIGURE=THREAD_MAX=6

    The CONFIGURE qualifier overrides the value of the ACME$THREAD_
    MAXIMUM logical, if it is defined.

    Because most authentication processing is I/O bound, defining
    more threads than about one quarter the number of request slots
    does not gain more throughput.

    The ACME server calculates a default number of request slots
    from the value of MAXPROCESSCNT and the number of available CPUs.
    You can override the calculated value by defining the inner-mode
    logical name ACME$REQUEST_MAXIMUM in the systemwide name table
    before you start or restart the ACME server. For example:

    $ DEFINE /SYSTEM /EXECUTIVE_MODE ACME$REQUEST_MAXIMUM 64
    $ SET SERVER ACME /RESTART

1.1.5    /DISABLE

    Disables (shuts down) all ACME agents. Additional ACME agents can
    be configured.

1.1.6    /ENABLE

       /ENABLE[=NAME=(name[,...])]

    Enables one or more ACME agents in the specified order. Ordering
    of ACME agents is significant, as the ACME_SERVER processes user
    authentication requests in the order specified. The name variable
    is a case-insensitive string argument.

    If you do not specify the NAME keyword, the same list of
    ACME agents will be enabled that were enabled by a previous
    /ENABLE command. If no previous /ENABLE command was issued, all
    configured ACME agents are enabled.

1.1.7    /EXIT

    Requests a graceful shutdown of the ACME agents. The ACME_SERVER
    process will be shut down after pending requests are completed.

1.1.8    /LOG

       /LOG
       /NOLOG (default)

    Creates and opens a new log file. The log file is named
    SYS$MANAGER:ACME$SERVER.LOG. It may be redirected by defining
    the system logical name ACME$SERVER.

1.1.9    /NODE

       /NODE=(node-name[,...])

    Issues the SET command to the ACME server on the specified nodes
    in the order they are entered. The node names must be located
    within the current cluster.

1.1.10    /RESTART

    Requests a graceful shutdown of the ACME agents. The ACME_SERVER
    process will be shut down after pending requests are completed.

    The ACME_SERVER is restarted and the SYS$MANAGER:ACME$START.COM
    startup procedure runs.

1.1.11    /RESUME

    Resumes normal operation following use of the /SUSPEND qualifier.

1.1.12    /START

       /START[=AUTO]

    /START cannot be used with the /ABORT, /EXIT, or /RESTART
    qualifiers.

    Starts the server process.

    The optional keyword, AUTO, causes the server to startup and
    configure itself using the SYS$MANAGER:ACME$START.COM procedure.
    By default, the server starts with only the OpenVMS ACME agent
    configured. The following options are available:

    To change the default privileges:

    /PRIVILEGES=(privilege[,...])

    To change the default UIC:

    /UIC=uic

    To change the default quotas:

    /AST_LIMIT=n
    /BUFFER_LIMIT=n
    /ENQUEUE_LIMIT=n
    /EXTENT=n
    /FILE_LIMIT=n
    /IO_BUFFERED=n
    /IO_DIRECT=n
    /JOB_TABLE_QUOTA=n
    /MAXIMUM_WORKING_SET=n
    /PAGE_FILE=n
    /QUEUE_LIMIT=n
    /SUBPROCESS_LIMIT=n
    /WORKING_SET=n

    You can use the following alternate syntax to specify a list of
    quotas and their values:

    /QUOTAS=(quota=n[,...])

    quota is a PQL-style quota name (for example: ASTLM, BIOLM)

    See the $CREPRC system service in the VSI OpenVMS System Services
    Reference Manual for a list of PQL-style quota names and
    descriptions.

    To change the image dump setting:

    /DUMP (default)
    /NODUMP

    Forces a process dump in the event of an abnormal process
    termination. The dump is written to SYS$MANAGER: using the image
    filename and .DMP extension.

1.1.13    /SUSPEND

    Suspends operation after all pending requests are completed.

    ACME agents are returned to their initial state (open files are
    closed, for example). This permits system management functions,
    such as system backups, to be performed without file-open
    conflicts.

    See also the /RESUME qualifier.

1.1.14    /TRACE

       /TRACE=n
       /NOTRACE

    Enables trace mode in the ACME$SERVER log file. Opens the log
    file if not already opened.

    n is a bit-mask with the following assigned bits:

    0   agent             Enable agent tracing
    1   general           General (non-specific) tracing
    2   vm                VM operations
    3   ast               AST processing
    4   wqe               WQE parameter values
    5   report            Agent status/attributes operations
    6   message           Messaging operations
    7   dialogue          Dialogue operations
    8   resource          Agent resource operations
    9   callout           Agent callout routine
    10  callout_status    Agent callout return status

    If you specify /NOTRACE, trace mode is disabled and the log file
    remains open.

1.1.15    /WAIT

       /WAIT
       /NOWAIT (default)

    Returns to caller once the server returns a status other than
    ACME$_BUSY.

    Can only be used with /EXIT, /DISABLE, and /SUSPEND qualifiers.

1.2  –  Examples

    1.$ SET SERVER ACME_SERVER/START/LOG

      This command starts the ACME server and creates and opens a new
      log file.

    2.$ SET SERVER ACME_SERVER/DISABLE/WAIT/CANCEL

      This command disables all configured ACME agents, cancelling
      all requests in progress. Control does not return to the
      DCL command prompt until the ACME server has completed the
      cancellations.

    3.$ SET SERVER ACME_SERVER/CONFIGURE=(NAME=VMS,CREDENTIALS=VMS)

      This command loads the VMS ACME agent and identifies its
      credentials as VMS.

2  –  REGISTRY_SERVER

    Valid for Alpha and Integrity server systems only.

    Controls the Registry server.

    Requires SYSPRV privilege.

    Format

      SET SERVER REGISTRY_SERVER

2.1  –  Qualifiers

2.1.1    /ABORT

    Aborts the Registry server on the specified node or nodes in the
    cluster.

    Cannot be used with the /EXIT, /RESTART, or /START qualifiers.

2.1.2    /CLUSTER

    Issues the SET command to each Registry server in the cluster,
    setting the Registry master server last.

    Cannot be used with the /MASTER or /NODE qualifiers.

2.1.3    /EXIT

    Stops the Registry server on the specified node or nodes in the
    cluster.

    Cannot be used with the /ABORT, /RESTART, or /START qualifiers.

2.1.4    /LOG

       /LOG
       /NOLOG (default)

    Closes the current Registry server log file and creates a new
    file.

2.1.5    /MASTER

    Requires SYSLCK privilege.

    Issues the command to the Registry master server only.

    Cannot be used with the /CLUSTER, /NODE, or /START qualifiers.

2.1.6    /NODE

       /NODE=(node-name[,...])

    Issues the SET command to the Registry servers on the specified
    nodes in the order they are entered. The node names must be
    within the current cluster.

    Cannot be used with the /CLUSTER or /MASTER qualifiers.

2.1.7    /RESTART

    Restarts the Registry server on the specified node or nodes in
    the cluster.

    Cannot be used with the /ABORT, /EXIT, or /START qualifiers.

2.1.8    /START

    /START cannot be used with the /ABORT, /EXIT, or /RESTART
    qualifiers.

    Starts the server process. The following options are available:

    To change the default privileges:

    /PRIVILEGES=(privilege[,...])

    To change the default UIC:

    /UIC=uic

    To change the default quotas:

    /AST_LIMIT=n
    /BUFFER_LIMIT=n
    /ENQUEUE_LIMIT=n
    /EXTENT=n
    /FILE_LIMIT=n
    /IO_BUFFERED=n
    /IO_DIRECT=n
    /JOB_TABLE_QUOTA=n
    /MAXIMUM_WORKING_SET=n
    /PAGE_FILE=n
    /QUEUE_LIMIT=n
    /SUBPROCESS_LIMIT=n
    /WORKING_SET=n

    You can use the following alternate syntax to specify a list of
    quotas and their values:

    /QUOTAS=(quota=n[,...])

    quota is a PQL-style quota name (for example: ASTLM, BIOLM)

    See the $CREPRC system service in the VSI OpenVMS System Services
    Reference Manual for a list of PQL-style quota names and
    descriptions.

    To change the image dump setting:

    /DUMP
    /NODUMP (default)

    Forces a process dump in the event of an abnormal process
    termination. The dump is written to SYS$MANAGER: using the image
    filename and .DMP extension.

2.2  –  Examples

    1.$ SET SERVER REGISTRY_SERVER/RESTART/MASTER

      This command restarts the detached Registry server on the
      master server.

    2.$ SET SERVER REGISTRY_SERVER/LOG/CLUSTER

      This command closes the current log files and opens new files
      on all systems across the cluster.

    3.$ SET SERVER REGISTRY_SERVER/EXIT/NODE=(KAKADU,CAIRNS)

      This command stops the detached Registry server process on
      nodes KAKADU and CAIRNS.

3  –  SECURITY_SERVER

    Controls the Security server.

    Requires SYSPRV privilege.

    Format

      SET SERVER SECURITY_SERVER

3.1  –  Qualifiers

3.1.1    /EXIT

    Stops the detached security server process.

    /EXIT cannot be used with any other qualifier.

3.1.2    /RESTART

    Restarts the detached security server process.

    /RESTART cannot be used with any other qualifier.

3.1.3    /START

    Starts the detached security server process.

    /START cannot be used with any other qualifier.

3.2  –  Examples

    1.$ SET SERVER SECURITY_SERVER/EXIT

      This command stops the detached security server process.

    2.$ SET SERVER SECURITY_SERVER/RESTART

      This command restarts the detached security server process.
Close Help