OUTPUT_TRAY=tray-name
Selects the output tray where the printer puts the printed output.
If you select a tray-name for a tray that is not available on your
printer, the output is sent to another tray if possible.
Since some trays are optional, not all trays are available on all
printers of a particular model.
1 – Compaq printers
You can select the following output trays with the Compaq Laser
Printer LN32 and LNM40 printers:
STANDARD or FACE_DOWN
FACE_UP
BIN_1 or STACKER
BIN_2
BIN_3
MAILBOX_1 - 10
You cannot select output trays with the Compaq Laser Printer LN16
and LNC02 printers.
2 – DIGITAL printers
2.1 – Colormate PS
You cannot select output trays with the Colormate PS printer.
2.2 – Colorwriter LSR 2000
You cannot select output trays with the Colorwriter LSR 2000
printer.
2.3 – LN printers
+--------------------+-------------+
| Output tray Values | LN17 | LN40 |
+--------------------+-------------+
| STANDARD / UPPER | X | X |
+--------------------+-------------+
| OCT * | X | |
+--------------------+-------------+
| MAILBOX_1 - 10 | X | |
+--------------------+-------------+
| COLLATOR ** | X | |
+--------------------+-------------+
| FACE_UP | | X |
+--------------------+-------------+
| FACE_DOWN | | X |
+--------------------+-------------+
* OCT stands for "Offset Catch Tray"
** 1 to 10 collated copies, using SHEET_COUNT
You cannot select output trays with the following printers:
DIGITAL Laser Printer LN15
DIGITAL Laser Printer LN20
DIGITAL Laser Printer LNC02
2.4 – DECcolorwriter 1000
You cannot select output trays with the DECcolorwriter 1000
printer.
2.5 – DEClaser printers
+--------------------+-------------+
| | DEClaser |
| Output tray Values | 2150 | 2250 |
+--------------------+-------------+
| FACE_UP | X | X |
+--------------------+-------------+
| LOWER | X | X |
+--------------------+-------------+
| UPPER | X | X |
+--------------------+-------------+
You cannot select output trays with the DEClaser 1150 and 1152
printers, but you can select face-up stacking using the front
panel control settings.
You cannot select output trays with the following printers:
DEClaser 3250
DEClaser 3500
DEClaser 5100
2.6 – PrintServer printers
+--------------------+-------------------+
| | PrintServer |
| Output tray Values | 17 | 20 | 32 | 40 |
+--------------------+-------------------+
| FACE_UP | X | X | X | X |
+--------------------+-------------------+
| LOWER | | X | X | |
+--------------------+-------------------+
| UPPER | X | X | X | |
+--------------------+-------------------+
| LCOS | X | | X | X |
+--------------------+-------------------+
| SIDE | | | | X |
+--------------------+-------------------+
| TOP | | | | X |
+--------------------+-------------------+
2.7 – ScriptPrinter
You cannot select output trays with the ScriptPrinter printer.
3 – GENICOM printers
+----------------------+-------------------------------+
| | | LN28 | LNM40 | |
| | LN21 | mL280 | mL320 | LN45 |
| Output tray Values | mL210 | mL402 | mL401 | mL450 |
+----------------------+-------------------------------+
| FACE_DOWN / STANDARD | X | X | X | X |
+----------------------+-------------------------------+
| FACE_UP | X | | X | X |
+----------------------+-------------------------------+
| OCT * | X | X | | |
+----------------------+-------------------------------+
| BIN_1 / STACKER | | | X | X |
+----------------------+-------------------------------+
| BIN_2 | | | X | |
+----------------------+-------------------------------+
| BIN_3 | | | X | |
+----------------------+-------------------------------+
| MAILBOX_1 - 10 | | | X | |
+----------------------+-------------------------------+
* OCT stands for "Offset Catch Tray"
You cannot select output trays with the GENICOM Intelliprint cL160
and microLaser 170 printers.
4 – HP printers
+----------------------+-----------------------------------------+
| | LaserJet |
| | 4200 9000 |
| | 4240| 9040 |
| | 4250| | 8000|M9040 |
| | 4300| 4345|M5025| 8100| 9050 |4SiMX|
| Output tray values | 4350|M4345|M5035| 8150|M9050|5SiMX|IIISi|
+----------------------+-----------------------------------------+
| FACE_DOWN / TOP / | X | | | X | X | X | X |
| STANDARD / UPPER | | | | | | | |
+----------------------+-----------------------------------------+
| STANDARD | | | X | | | | |
+----------------------+-----------------------------------------+
| FACE_UP | | | | X | | | X |
| FACE_UP / BIN_1 | | | | | X | | |
| FACE_UP / SIDE | | | | | | X | |
+----------------------+-----------------------------------------+
| MAILBOX_nn * | | | | X | X | X | |
+----------------------+-----------------------------------------+
| STACKER / BIN_2 | | | | | X | | |
| STACKER / SIDE | | | | X | | | |
| STACKER / STAPLER | X | X | | | X | | |
| STAPLER | | | X | | | | |
| BIN_1 | | X | | | | | |
+----------------------+-----------------------------------------+
| BIN_2 | | X | | | | | |
+----------------------+-----------------------------------------+
| BIN_3 | | X | | | | | |
+----------------------+-----------------------------------------+
+--------------------------------------+
| | 8050 | |
| Output tray values | 8060 | 9085 |
+------------------------- ------ -----+
| TOP /STANDARD /UPPER | X | |
+------------------------- ------ -----+
| BIN_1 | X | X |
+------------------------- ------ -----+
| STACKER / STAPLER | X | |
| STACKER / BIN_5 | X | |
+------------------------- ------ -----+
| BIN_2 | X | X |
+------------------------- ------ -----+
| BIN_3 - 5 | X | |
+------------------------- ------ -----+
+-----------------------------------------------------------+
| | Color LaserJet |
| | | 8500 | |CM6030|
| Output tray values | 4700 | 4730 | 8550 | 9500 |CM6040|
+------------------------- ------ ------ ------ ------ -----+
| FACE_DOWN / TOP / | X | X | X | X | X |
| STANDARD / UPPER | | | | | |
+------------------------- ------ ------ -----+ ------ -----+
| FACE_UP / BIN_1 | | | | X | |
| FACE_UP / SIDE | | | X | | |
| BIN_1 / LOWER | | | | X | X |
+------------------------- ------ ------ -----+ ------ -----+
| MAILBOX_nn / BIN_nn * | | | | X | |
+------------------------- ------ ------ -----+ ------ -----+
| STACKER / STAPLER | X | X | | X | X |
| STACKER / BIN_1 | | X | | | X |
| STACKER / BIN_2 | | | | X | |
+------------------------- ------ ------ -----+ ------ -----+
| BIN_2 | | X | | | |
| MIDDLE /BIN_2 | | | | | X |
+------------------------- ------ ------ -----+ ------ -----+
| BIN_3 | | X | | | X |
+------------------------- ------ ------ -----+ ------ -----+
* nn is the mailbox number. Mailboxes are numbered from
1 to a maximum of 8. When the printer is in collator,
job separator or stacker mode, mailbox 1 is the only valid
mailbox since, in these modes, the printer views the
mailboxes as one logical tray.
You cannot select output trays with HP printers that are not listed
above.
5 – IBM printers
+--------------------+-------------+
| | InfoPrint |
| | | 32 |
| Output tray values | 21 | 40 |
+--------------------+-------------+
| STANDARD | X | X |
+--------------------+-------------+
| OCT * | X | |
+--------------------+-------------+
| FACE_UP | | X |
+--------------------+-------------+
| BIN_1 | | X |
+--------------------+-------------+
| BIN_2 | | X |
+--------------------+-------------+
| BIN_3 | | X |
+--------------------+-------------+
| COLLATOR | | X |
+--------------------+-------------+
* OCT stands for "Offset Catch Tray"
6 – Lexmark printers
+--------------------+-----------------------------------------+
| | | | |OT614| | |
| | | Optra S | |OT616| | |
| | | 1650| 2450| | T620| | |
| | | 1855| 2455|Optra| T622| T520| |
| Output tray Values | C750| 2420|e3455| T612|OW810| T522| W820|
+--------------------+-----------------------------------------+
| STANDARD / TOP | X | X | X | X | X | X | X |
+--------------------+-----------------------------------------+
| BIN_1 - 2 | X | X | X | X | X | | X |
+--------------------+-----------------------------------------+
| BIN_3 | | | X | X | X | | X |
+--------------------+-----------------------------------------+
| BIN_4 | | | | X | X | | X |
+--------------------+-----------------------------------------+
| BIN_5 - 6 | X | | | X | X | | X |
+--------------------+-----------------------------------------+
| BIN_7 | | | | X | X | | X |
+--------------------+-----------------------------------------+
| BIN_8 - 10 | | | | | X | | X |
+--------------------+-----------------------------------------+
You cannot select output trays with Lexmark printers that are
not listed above.
7 – Ricoh printers
+--------------------+-------------------------------------------+
| | Aficio |
| | |CL7000 | |
| |MP2510| |CL7100 | |
| |MP3500| 3035 | |CL7200 |SPC811 |
| Output tray Values |MP4500| 3045 | 3235 |AP4510|CL7300 |SP8100 |
+--------------------+-------------------------------------------+
| BIN_1 | X | X | X | | X | |
+--------------------+-------------------------------------------+
| BIN_2 | | | X | | X | |
+--------------------+-------------------------------------------+
| MAILBOX_1 - 4 | | | | | X | |
+--------------------+-------------------------------------------+
| MAILBOX_1 - 9 | | | | X | | |
+--------------------+-------------------------------------------+
| SIDE | | | X | | X | |
+--------------------+-------------------------------------------+
| STANDARD | X | X | X | X | X | X |
+--------------------+-------------------------------------------+
| LOWER | X | | | | | X |
+--------------------+-------------------------------------------+
| UPPER | X | | | | | X |
+--------------------+-------------------------------------------+
You cannot select output trays with Ricoh printers that are not
listed above.
8 – Tektronix printers
You can select the following output trays with the Tektronix Phaser
740, 750 and 780 printers:
FACE_DOWN (STANDARD)
FACE_UP
You cannot select output trays with the Tektronix Phaser 200e, 200i,
220e and 850 printers.
9 – Xerox printers
+----------------------+---------------------------------------+
| | |WorkCentre Pro |
| | | 35 |
| | | 45 |
| | | 55 |
| | | 65 |
| | | 75 |
| | | 90 |
| | | 232 |
| | | 238 |
| | DocuPrint N | 245 |
| | | 32 | 255 | C2128 |
| | 2025 | | 3225 | 265 | C2636 |
| Input tray values | 2825 | 2125 | 4025 | 275 | C3545 |
+----------------------+---------------------------------------+
| BIN_1 | | | X | | |
+----------------------+---------------------------------------+
| BIN_2 | | | X | | |
+----------------------+---------------------------------------+
| BIN_3 | | | X | | |
+----------------------+---------------------------------------+
| COLLATOR | | | X | | |
+----------------------+---------------------------------------+
| FACE_DOWN / STANDARD | X | X | X | | |
+----------------------+---------------------------------------+
| FACE_UP | | | X | | |
+----------------------+---------------------------------------+
| LOWER | | | | X | |
+----------------------+---------------------------------------+
| MAILBOX_1 - 10 | | | X | | |
+----------------------+---------------------------------------+
| OCT * | X | X | | | |
+----------------------+---------------------------------------+
| SIDE | | | | X | X |
+----------------------+---------------------------------------+
| STACKER | | | X | X | X |
+----------------------+---------------------------------------+
| TOP | | | | | X |
+----------------------+---------------------------------------+
| UPPER / TOP | | | | X | |
+----------------------+---------------------------------------+
* OCT stands for "Offset Catch Tray"
+----------------------+---------------------------+
| | Phaser |
| Input tray values | 4500 | 5500 | 7300 | 7750 |
+----------------------+---------------------------+
| FACE_DOWN / STANDARD | X | X | X | X |
| UPPER / TOP | | | | |
+----------------------+---------------------------+
| OCT * | X | | | |
+----------------------+---------------------------+
| SIDE | | | X | |
+----------------------+---------------------------+
| STACKER | | X | | X |
+----------------------+---------------------------+
* OCT stands for "Offset Catch Tray"
** where "nn" is a value from 1 to 10
You cannot select output trays with Xerox printers not listed above.