NCPHELP.HLB  —  SHOW  MODULE  X25-SERVER
 Use the SHOW MODULE X25-SERVER and SHOW MODULE X29-SERVER commands  to
 display  the  parameters  of the X25 and X.29 Call Handlers stored in
 the volatile data base.  Use  the  LIST  MODULE  X25-SERVER  and  LIST
 MODULE  X29-SERVER  commands to display the parameters of the X25 and
 X.29 Call Handlers stored in  the  permanent  data  base.   Note  that
 keyword MODULE is optional.

 Format:

      SHOW MODULE X25-SERVER  CHARACTERISTICS TO File-id
      LIST        X29-SERVER  COUNTERS
                              STATUS
                              SUMMARY

                              DESTINATION name   CHARACTERISTICS TO file-id
                              KNOWN DESTINATIONS STATUS
                                                 SUMMARY

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

1  –  CHARACTERISTICS

 Displays static line information.

2  –  COUNTERS

 Displays module error and performance statistics. (Used only with the
 SHOW MODULE X25-SERVER or SHOW MODULE X29-SERVER command.)

3  –  DESTINATION name

 Displays information for the specified destination only.

4  –  KNOWN DESTINATIONS

 Displays information for all known destinations.

5  –  STATUS

 Displays dynamic module information. (Used only with the SHOW MODULE
 X25-SERVER or SHOW MODULE X29-SERVER command.)

6  –  SUMMARY

 Displays only the most useful module information.  This is the
 default display type.

7  –  TO file-id

 Specifies the output file. If you omit this parameter, the default
 file is SYS$OUTPUT.
Close Help