HELPLIB.HLB  —  Lexicals  F$SETPRV  Examples
    1.$ OLDPRIV = F$SETPRV("OPER,NOTMPMBX")
      $ SHOW SYMBOL OLDPRIV
        OLDPRIV = "NOOPER,TMPMBX"

      In this example, the process is authorized to change the OPER
      (operator) and TMPMBX (temporary mailbox) privileges. The
      F$SETPRV function enables the OPER privilege and disables the
      TMPMBX privilege. In addition, the F$SETPRV function returns
      the keywords NOOPER and TMPMBX, showing the state of these
      privileges before they were changed.

      You must place quotation marks (" ")  around the list of
      privilege keywords because it is a string literal.

    2.$ SHOW PROCESS/PRIVILEGE

      05-JUN-2001 15:55:09.60   RTA1:              User: HELRIEGEL

      Process privileges:

      Process rights identifiers:
       INTERACTIVE
       LOCAL

      $ NEWPRIVS = F$SETPRV("ALL, NOOPER")
      $ SHOW SYMBOL NEWPRIVS
        NEWPRIVS = "NOCMKRNL,NOCMEXEC,NOSYSNAM,NOGRPNAM,NOALLSPOOL,
            NOIMPERSONATE,NODIAGNOSE,NOLOG_IO,NOGROUP,NOACNT,NOPRMCEB,
            NOPRMMBX,NOPSWAPM,NOALTPRI,NOSETPRV,NOTMPMBX,NOWORLD,NOMOUNT,
            NOOPER,NOEXQUOTA,NONETMBX,NOVOLPRO,NOPHY_IO,NOBUGCHK,NOPRMGBL,
            NOSYSGBL,NOPFNMAP,NOSHMEM,NOSYSPRV,NOBYPASS,NOSYSLCK,NOSHARE,
            NOUPGRADE,NODOWNGRADE,NOGRPPRV,NOREADALL,NOSECURITY,OPER"
      $ SHOW PROCESS/PRIVILEGE

      05-JUN-2001 10:21:18.32   User: INAZU      Process ID: 00000F24
                                Node: TOKNOW     Process name: "_FTA23:"

      Authorized privileges:
       NETMBX    SETPRV    SYSPRV    TMPMBX

      Process privileges:
       ACNT                 may suppress accounting messages
       ALLSPOOL             may allocate spooled device
       ALTPRI               may set any priority value
       AUDIT                may direct audit to system security audit log
       BUGCHK               may make bug check log entries
       BYPASS               may bypass all object access controls
       CMEXEC               may change mode to exec
       CMKRNL               may change mode to kernel
       DIAGNOSE             may diagnose devices
       DOWNGRADE            may downgrade object secrecy
       EXQUOTA              may exceed disk quota
       GROUP                may affect other processes in same group
       GRPNAM               may insert in group logical name table
       GRPPRV               may access group objects via system protection
       IMPERSONATE          may impersonate another user
       IMPORT               may set classification for unlabeled object
       LOG_IO               may do logical i/o
       MOUNT                may execute mount acp function
       NETMBX               may create network device
       OPER                 may perform operator functions
       PFNMAP               may map to specific physical pages
       PHY_IO               may do physical i/o
       PRMCEB               may create permanent common event clusters
       PRMGBL               may create permanent global sections
       PRMMBX               may create permanent mailbox
       PSWAPM               may change process swap mode
       READALL              may read anything as the owner
       SECURITY             may perform security administration functions
       SETPRV               may set any privilege bit
       SHARE                may assign channels to non-shared devices
       SHMEM                may create/delete objects in shared memory
       SYSGBL               may create systemwide global sections
       SYSLCK               may lock systemwide resources
       SYSNAM               may insert in system logical name table
       SYSPRV               may access objects via system protection
       TMPMBX               may create temporary mailbox
       UPGRADE              may upgrade object integrity
       VOLPRO               may override volume protection
       WORLD                may affect other processes in the world

      Process rights:
       INTERACTIVE
       LOCAL

      System rights:
       SYS$NODE_TOKNOW

      $ NEWPRIVS = F$SETPRV(NEWPRIVS)
      $ SHOW PROCESS/PRIVILEGE

      05-JUN-2001 16:05:07.23   RTA1:              User: JERROM

      Process privileges:
       OPER                 operator privilege

      Process rights identifiers:
       INTERACTIVE
       LOCAL

      In this example, the DCL command SHOW PROCESS/PRIVILEGE is
      used to determine the current process privileges. Note that the
      process has no privileges enabled.

      The F$SETPRV function is then used to process the ALL keyword
      and enable all privileges recording the previous state of each
      privilege in the symbol NEWPRIVS. Next, F$SETPRV processes
      the NOOPER keyword and disables the OPER (operator) privilege,
      recording the previous state of OPER in NEWPRIVS. Note that the
      OPER privilege appears in the returned string twice: first as
      NOOPER and then as OPER.

      Entering the command SHOW PROCESS/PRIVILEGE now shows that the
      current process has all privileges enabled except OPER.

      If the returned string is used as the parameter to F$SETPRV,
      the process has the OPER privilege enabled. This occurs because
      the OPER command was present twice in the symbol NEWPRIVS.
      As a result, F$SETPRV looked at the first keyword NOOPER and
      disabled the privilege. Finally, after processing several other
      keywords in the NEWPRIVS string, the OPER keyword is presented,
      allowing F$SETPRV to enable the OPER privilege.

      If you are using the ALL or NOALL keywords to save your
      current privilege environment, VSI recommends that you perform
      the following procedure to modify the process for a command
      procedure:

        $ CURRENT_PRIVS = F$SETPRV("ALL")
        $ TEMP = F$SETPRV("NOOPER")

      If you use this procedure, you can then specify the following
      command statement at the end of your command procedure so that
      the original privilege environment is restored:

        $ TEMP = F$SETPRV(CURRENT_PRIVS)

    3.$ SAVPRIV = F$SETPRV("NOGROUP")
      $ SHOW SYMBOL SAVPRIV
        SAVPRIV = "GROUP"
      $ TEST = F$PRIVILEGE("GROUP")
      $ SHOW SYMBOL TEST
        TEST = "TRUE"

      In this example, the process is not authorized to change the
      GROUP privilege; however, the F$SETPRV function still returns
      the current setting for the GROUP privilege.

      The F$PRIVILEGE function is used to see whether the process has
      GROUP privilege. The return string, TRUE, indicates that the
      process has GROUP privilege, even though the F$SETPRV function
      attempted to disable the privilege.
Close Help