bugcheck processing

3 VMSDEBUGUIL.UID
   DECwindows support for the Debugger

3 VMS_EXECLET_LNK.OPT
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 VMS_NOTARY_SHR.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 WWPPS.PCF
   WWPPS printer customization file

3 XA.H
   Unsupported DECdtm X/Open DTP XA C language header file

3 XFC$SDA.EXE
   Extended file cache SDA extension image.  Provides additional 
   SDA commands.

3 XTI$DNETSHR.EXE
   DECnet Phase IV back end to X/Open Transport Interface (XTI)

3 XTI$IPSHR.EXE
   HP TCP/IP Services for OpenVMS

3 XTI$XTILIB.EXE
   X/Open Transport Interface (XTI) front end  

3 XTI.H
   X/Open Transport Interface (XTI) header file

3 XX$SDA.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

2 [SYSMAINT]
   This directory, known by the logical name SYS$MAINTENANCE, is
   reserved for system hardware diagnostic programs.

2 [SYSMGR]
   This directory, known by the logical name SYS_MANAGER, contains
   files used to manage the operating system. This directory is
   the default directory for the system manager's account.

3 ACCOUNTNG.DAT
   Accounting data file

3 ACME$START.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ACME$START.TEMPLATE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 AGEN$NEW_NODE_DEFAULTS.TEMPLATE
   Used with CLUSTER_CONFIG.COM and AUTOGEN; a template for a site-
   specific data file to include system parameter values for non-
   satellite nodes.

3 AGEN$NEW_SATELLITE_DEFAULTS.TEMPLATE
   Used with CLUSTER_CONFIG.COM and AUTOGEN; a template for a
   site-specific data file to include system parameter values for
   satellite nodes.

3 AMDS$DRIVER_ACCESS.DAT
   Defines security information for the Availability Manager and
   DECamds data collector nodes. It is read once at startup time.

3 AMDS$DRIVER_ACCESS.TEMPLATE
   DECamds driver security file

3 AMDS$LOGICALS.COM
   Logical name definitions used by DECamds and the Availability 
   Manager; executed by SYS$STARTUP:AMDS$STARTUP.COM.

3 AMDS$LOGICALS.TEMPLATE
   DECamds application setup file

3 AMDS$SYSTARTUP.TEMPLATE
!**V732 V73  ???
  This file is included in the latest system build, but
  a description of the file is not available.

3 AUDIT_SERVER.DAT
   System security audit server database

3 BOOT_OPTIONS.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 CCL$ISV_CALLOUTS.TXT
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 CDRECORD.COM
  Command procedure for writing to CD-ROM

3 CLUSTER_CONFIG.COM
   Command procedure for cluster configuration

3 CLUSTER_CONFIG_LAN.COM
   Replacement for CLUSTER_CONFIG.COM (Cluster Configuration utility) 
   that uses LANCP instead of DECnet for booting satellites 

3 CREATE_SPECIAL_ACCOUNTS.COM
   Command procedure to create SYSTEST, SYSTEST_CLIG, and Field Service
   accounts

3 DBLSTRTUP.COM
   Command procedure to start up DIBOL message manager

3 DCE$RPC_SHUTDOWN.COM
   RPC/DCE command procedure that provides the controlled 
   shutdown DCE$RPCD

3 DCE$RPC_STARTUP.COM
   RPC/DCE command procedure that provides the initialization of 
   system environment and the controlled startup of DCE$RPCD.EXE

3 DECC$MSG.EXE
   VSI C message file

3 DECW$DEVICE.COM
   DECwindows device configuration command procedure

3 DECW$DEVICE_CONFIG_COMMON.COM
   DECwindows device configuration command procedure

3 DECW$DEVICE_CONFIG_GB.COM
   DECwindows device configuation command procedure for the 
   PowerStorm 300/350 (Peregrine) graphics card

3 DECW$DEVICE_CONFIG_GF.COM
   DECwindows device configuation command procedure for the 
   Oxygen VX1 graphics card

3 DECW$DEVICE_CONFIG_GH.COM
   DECwindows device configuation command procedure for the 
   ATI RADEON 7500 graphics card

3 DECW$DEVICE_CONFIG_GQ.COM
   DECwindows device configuration command procedure for Qlogic 
   graphics cards

3 DECW$DEVICE_CONFIG_GX.COM
   DECwindows device configuration command procedure for 
   SFB/Turbochannel graphics cards

3 DECW$DEVICE_CONFIG_GY.COM
   DECwindows device configuration command procedure for TGA 
   graphics cards

3 DECW$DEVICE_CONFIG_GZ.COM
   DECwindows device configuation command procedure for the 
   PowerStorm 4D10T (ELSA Gloria) graphics card

3 DECW$DEVICE_CONFIG_P2.COM
   Secondary DECwindows device configuration command procedure for 
   the ELSA Gloria Synergy (formerly named PowerStorm 4D10T) 
   graphics card

3 DECW$EURO_APPS_SETUP.TEMPLATE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 DECW$EURO_SERVER_SETUP.TEMPLATE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 DECW$FS_CONFIG.DAT
   DECwindows font server configuration data file

3 DECW$INSTALL_IMAGES.COM
!**V732   NOT Ben Crocker -- But who?
  This file is included in the latest system build, but
  a description of the file is not available.

3 DECW$P350_SINGLE_CPU.COM
   DECwindows device configuation command procedure to allow the 
   PowerStorm 300/350 (Peregrine) graphics card to be used on SMP 
   systems

3 DECW$PRIVATE_SERVER_SETUP.TEMPLATE
   DECwindows customization file.  This is a template file for a
   user-specified [SYSMGR]DECW$PRIVATE_SERVER_SETUP.COM file. 

3 DECW$RGB.DAT
   DECwindows server data file specifying named colors in 
   red-green-blue format

3 DECW$RUN_TABLET.COM
   DECwindows command procedure for tablet (input device) support

3 DECW$SPECIAL_AS1000_CIRRUS.COM
   DECwindows device configuration command procedure for Cirrus 
   graphics cards on AlphaServer 1000 systems

3 DECW$STARTSERVER.COM
   DECwindows server startup command procedure

3 DECW$TABLET_STARTUP.COM
   DECwindows command procedure for tablet (input device) support

3 EDTINI.TEMPLATE
   Template for EDT initialization file

3 GALAXY.GCR
   A ruleset used by the Galaxy Configuration Utility (GCU)
   to define display and control parameters

3 GCU$ACTIONS.COM
   A command procedure used by the OpenVMS Galaxy Configuration
   Utility (GCU) for inter-instance command execution

3 GICAP$CONFIG.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 GICAP$MENU.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 GL_1_1_SETUP.COM
   Command procedure that redirects OpenGL-related images to 
   P350-specific or OpenGL V1.1-specific images

3 ICAP$CHILD.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ICAP$CLI_UTILS.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ICAP$CONFIG.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ICAP_SERVER$SHUTDOWN.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ICC$ADD_REGISTRY_TABLE.COM
   ICC system startup file normally called from ICC$SYSTARTUP.COM 
   to create ICC registry tables

3 ICC$CREATE_SECURITY_OBJECT.COM
   ICC system startup file normally called from ICC$SYSTARTUP.COM
   to create ICC security objects

3 ISA_CONFIG.TEMPLATE
   Tells the system which devices are connected to the ISA bus

3 ISCSI$ISNS_SERVERS.TEMPLATE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ISCSI$MANUAL_TARGETS.TEMPLATE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 JBC$DST_COMMAND.COM
   Command procedure scheduled by the job controller to perform  
   daylight savings time changes and to schedule the next daylight 
   savings time change

3 KRB$LOGICALS.COM
  Command procedure to define Kerberos logicals

3 KRB$SYMBOLS.COM
  Command procedure to define Kerberos symbols

3 LAT$SYSTARTUP.COM
   Site-specific LAT startup command procedure

3 LAT$SYSTARTUP.TEMPLATE
   Site-specific startup command procedure template

3 LIB$DT_STARTUP.COM
   Command procedure to create logical names for months, days, and
   relative days in supported languages

3 LMF$COMPLIANCE_REPORT.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 LOADNET.COM
   Command procedure to create network ACP process

3 LOGIN.COM
   Login command procedure

3 LOGIN.TEMPLATE
   Template for login command procedure

3 LTLOAD.COM
   Command procedure to load and start LAT

3 NETCONFIG.COM
   Command procedure to configure network database

3 NPAR_RUN_CONFIGURE.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 REG$CONFIG.COM
   DCL command procedure for configuring the OpenVMS Registry

3 RTTLOAD.COM
   Remote terminal loader

3 SECURITY.AUDIT$JOURNAL
   System security audit log file

3 SMISERVER.COM
   Command procedure for SMISERVER

3 STARTNET.COM
   DECnet for OpenVMS startup procedure

3 SYCONFIG.COM
   Site-specific device configuration command procedure

3 SYCONFIG.TEMPLATE
   Template for site-specific device configuration command procedure

3 SYLOGICALS.COM
   Site-specific logical names definition command procedure

3 SYLOGICALS.TEMPLATE
   Template for site-specific logical names definition command
   procedure

3 SYLOGIN.COM
   Systemwide login command procedure

3 SYLOGIN.TEMPLATE
   Template for systemwide login command procedure

3 SYPAGSWPFILES.COM
   Site-specific command procedure to install page and swap files

3 SYPAGSWPFILES.TEMPLATE
   Template for site-specific command procedure to install page and
   swap files

3 SYS$INDICTMENT_POLICY.COM
   Definitions used to determine whether Component Indictment
   should be started to allow CPUs to be stopped

3 SYS$INDICTMENT_POLICY.TEMPLATE
   Template for command procedure SYS$INDICTMENT_POLICY.COM, which is 
   used to determine whether Component Indictment should be started to 
   allow CPUs to be stopped

3 SYS$LOGIN_SWITCH.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 SYSECURITY.COM
   Command procedure to mount or define disks that contain security
   auditing log files or local security archive files

3 SYSECURITY.TEMPLATE
   Template for command procedure to mount or define disks that
   contain security auditing log files or local security archive
   files

3 SYSHUTDWN.COM
   Site-specific system shutdown command procedure

3 SYSHUTDWN.TEMPLATE
   Template for site-specific shutdown command procedure

3 SYSHUTDWN_0010.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 SYSHUTDWN_0010.TEMPLATE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 SYSTARTUP_VMS.COM
   Site-specific system startup command procedure

3 SYSTARTUP_VMS.TEMPLATE
   Template for the site-specific system startup command procedure

3 TFF$SYSTARTUP.COM
   Default startup command procedure for the Terminal Fallback
   Facility (TFF)

3 TFF$SYSTARTUP.TEMPLATE
   Template for the startup command procedure for the Terminal
   Fallback Facility (TFF)

3 TNT$UTILITY.COM
   Controls the OpenVMS Management Station server

3 USB$STARTUP.COM
  Command procedure that starts up the server process

3 UTC$CONFIGURE_TDF.COM
   Command procedure used by UTC$TIME_SETUP.COM to set the UTC 
   services time differential factor (TDF)

3 UTC$TIMEZONE_SETUP.COM
   Configuration file used by UTC$TIME_SETUP.COM to set the local 
   time zone information 

3 UTC$TIME_SETUP.COM
   Configuration file used to set the local time zone and the 
   system time differential factor

3 VMS$DEFINE_PASSWORD_POLICY.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 VMS$IMAGES_MASTER.DAT
   Data file listing the images installed at boot time; this file
   should not be modified

3 VMSIMAGES.DAT
   Data file for VMSIMAGES.COM

3 WELCOME.TEMPLATE
   Template for welcome text displayed at login

3 WELCOME.TXT
   Welcome text displayed at login

2 [SYSMSG]
   This directory, known by the logical name SYS$MESSAGE, contains
   system message text files.

3 CDDVD$MSG.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 CLIUTLMSG.EXE
   ANALYZE/MEDIA, EXCHANGE, MAIL, PHONE, PRINT, RUN, SET, SHOW,
   SEARCH, SUBMIT message file

3 CXXL$MSG_SHR.EXE
   Message file for the VSI C++ runtime library; implements
   messages used in iostream, task, messages, objections, and
   complex

3 DBGTBKMSG.EXE
   DEBUG, TRACE message file

3 DBL$MSG.EXE
   DIBOL message file

3 DCE$RPC_MSG.EXE
   RPC/DCE image that provides RPC message handling

3 DDTM$XG_MSG.EXE
   DECdtm message file

3 DECC$MSG.EXE
   VSI C message file

3 DECW$TRANSPORTMSG.EXE
   DECwindows Motif for OpenVMS transport message image

3 EFI$MSG.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ELVMSG.EXE
   Nonexecutable message file for the Error Log Viewer (ELV)

3 ENCRYPT$_MSG.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 EPC$MSG.EXE
   DECtrace message file

3 EPC$MSG.TEMPLATE
!**V732 V73  ???
  This file is included in the latest system build, but
  a description of the file is not available. 


3 FILMNTMSG.EXE
   ANALYZE/DISK, ANALYZE/IMAGE, ANALYZE/OBJECT, EDIT/FDL message
   file

3 GENCATMSG.EXE
   Message file for GENCAT utility

3 ICONVMSG.EXE
   Message file for ICONV utility

3 LATMSG.EXE
   LAT message file

3 LD$MSG.EXE
  LDDRIVER message file

3 LM$MSG.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 LMCP$MSG.EXE
   Log Manager Control Program (LMCP) message file

3 LMF_MESSAGE.EXE
   License Management facility message file

3 LOCALEMSG.EXE
   Message file for locale-related utilities

3 NETWRKMSG.EXE
   NCP, SET HOST message file

3 PAS$MSG.EXE
   Pascal message file

3 PPLMSG.EXE
   Parallel processing message file

3 PPPDMSG.EXE
   Message file for point-to-point protocol (PPPD) utility

3 PRGDEVMSG.EXE
   ANALYZE/CRASH, ANALYZE/SYSTEM, CDU, DIFF, DUMP, LIBRARY, LINK,
   MACRO, MESSAGE, PATCH message file

3 RPG$MSG.EXE
   RPG message file

3 SCN$MSG.EXE
   SCAN message file

3 SHRIMGMSG.EXE
   CONVSHR, DCXSHR, EDTSHR, FDLSHR, SMGSHR, SORTSHR, message file

3 SORTMSG.EXE
   Sort utility message file

3 SYSMGTMSG.EXE
   ACC, AUTHORIZE, BACKUP, EDIT/ACL, INSTALL, MONITOR, SYSMAN
   message file

3 SYSMSG.EXE
   System message file

3 TDF$MSG.EXE
   Image containing messages used by time change components

3 TECOMSG.EXE
   TECO editor message file

3 TPUMSG.EXE
   TPU message file

3 USB$MSG.EXE
  USB error messages

3 VMSINSTAL_LANGUAGE.COM
   VMSINSTAL message file

3 VMSLICENSE_LANGUAGE.COM
   OpenVMS License Management utility message file

2 [SYSTEST.ENCRYPTION]
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ENCRYPT$IVP.TLB
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 TEST_BINA.DAT
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 TEST_TEXT.DAT
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 V010_FILENC010.DAT
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 V010_TEST01.DAT
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 V010_TEST02.DAT
!**
  This file is included in the latest system build, but
  a description of the file is not available.

2 [SYSTEST.TNT]
   SYSTEST subdirectory for OpenVMS Management Station

3 TNT$SERVER_IVP.EXE
   OpenVMS Management Station Installation Verification Procedure (IVP)

2 [SYSTEST]
   This directory, known by the logical name SYS$TEST, contains
   files used to run the User Environment Test Package (UETP).

3 DECDTM_XA_IVP.EXE
  DECdtm XA Installation Verification Proceedure image 

3 DECDTM_XG_IVP.EXE
  DECdtm XA Gateway Installation Verification Proceedure image 

3 DECRAM$IVP.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ENCRYPT$IVP.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 HTHREADS.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 RADCHECK.EXE
   Checks the distribution of pages used across the Resource
   Affinity Domains (RADs) on the system; also monitors and 
   modifies the Soft RAD Affinity process scheduling algorithm.  
   To use it, specify RADCHECK as a foreign command (for example, 
   RADCHECK == "$SYS$SYSROOT:[SYSTEST]RADCHECK).  For more 
   information, enter "$RADCHECK help" at the $ prompt. 

3 TCNTRL.CLD
   Defines commands to invoke the UETP test controller

3 TNT$IVP.COM
   Initiates the OpenVMS Management Station's TNT$SERVER_IVP.EXE 

3 UETCDRO00.EXE
   Compact disc reader device test

3 UETCLIG00.COM
   Command procedure for the cluster integration phase

3 UETCLIG00.DAT
   Used by UETP test controller to start cluster integration phase

3 UETCLIG00.EXE
   Cluster integration phase

3 UETDISK00.EXE
   Disk device test

3 UETDNET00.COM
   Command procedure for DECnet for OpenVMS phase

3 UETDNET00.DAT
   Used by UETP test controller to start DECnet for OpenVMS phase

3 UETFORT01.DAT
   FORTRAN data file used by test

3 UETFORT01.EXE
   FORTRAN artificial load test files

3 UETFORT02.EXE
   FORTRAN artificial load test files

3 UETFORT03.EXE
   FORTRAN artificial load test files

3 UETINIT00.EXE
   Checks UETP environment and sets overall parameters

3 UETINIT01.EXE
   Checks devices and builds UETINIDEV.DAT

3 UETLOAD00.DAT
   Used by UETP test controller to start load test phase

3 UETLOAD02.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD03.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD04.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD05.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD06.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD07.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD08.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD09.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD10.COM
   UETP load phase command procedure used to simulate load on system

3 UETLOAD11.COM
   UETP load phase command procedure used to simulate load on system

3 UETMEMY01.EXE
   Artificial load for load test

3 UETNETS00.EXE
   Reports nonzero counters as part of DECnet for OpenVMS phase

3 UETP.COM
   Main command procedure for UETP

3 UETPHAS00.EXE
   Test controller

3 UETSUPDEV.DAT
   Supported device data file

3 UETTAPE00.EXE
   Magnetic tape device test

3 UETTTYS00.EXE
   Terminal and line printer device test

3 UETUNAS00.EXE
   DEUNA device test

2 [SYSUPD]
   This directory, known by the logical name SYS$UPDATE, contains
   files used to apply system updates.

3 AUTOGEN.COM
   Command procedure to calculate parameter values and system file
   sizes

3 AXPVMS$PCSI_EX_*.COM
   Command procedures used by the POLYCENTER Software Installation
   (PCSI) utility during installation/upgrade of OpenVMS

3 CIM_QUALIFIERS25.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 CIM_X25.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 CREATE_IDX.EXE
   Creates VMSKITBLD.IDX and DECW$KITBLD.IDX

3 CREATE_XML.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 DECW$KITBLD.DAT
   A list of files that provide OpenVMS support for DECwindows

3 DECW$KITBLD.IDX
   An indexed version of DECW$KITBLD.DAT

3 DECW$MKFONTDIR.COM
   DECwindows command procedure to create font directories

3 DTSS$INSTALL_TIMEZONE_RULE.COM
   Command procedure to run SYS$SYSTEM:SYS$READ_TIME_ZONE_RULE.EXE, 
   which returns the timezone rule in the logical name 
   SYS$TIMEZONE_RULE and writes a new version of the UTC startup 
   file, DTSS$UTC_STARTUP.COM or TDF$UTC_STARTUP.COM, in SYS$STARTUP.

3 HP_GICAPPROVIDERREG.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 HP_ICAPPROVIDERREG.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 HP_ICODPROVIDERREG.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ICAP.CLD
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ICAP.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 ICAP_CLD.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 IOGEN$CLEANUP.EXE
   A tool used by the operating system installation procedure

3 KRB$REMOVE.COM
  Dummy PCSI Kerberos removal command procedure

3 LIBDECOMP.COM
   Command procedure to expand libraries shipped in data-reduced
   format

3 NETCONFIG_UPDATE.COM
   Command procedure to configure an existing DECnet for OpenVMS
   network

3 NPAR.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 NPARREG.MOF
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 P350_ADD_DEVICE.COM
   Script run at installation time to add P300/P350 device to 
   system configuration

3 PCSI$CREATE_ACCOUNT.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to implement the Product Description Language ACCOUNT 
   statement, which is used in Product Description files in product kits

3 PCSI$CREATE_NETWORK_OBJECT.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to implement the Product Description Language NETWORK OBJECT
   statement, which is used in Product Definition files in product kits

3 PCSI$CREATE_RIGHTS_IDENTIFIER.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to implement the Product Description Language RIGHTS 
   IDENTIFIER statement, which is used in Product Definition files 
   in product kits

3 PCSI$DELETE_ACCOUNT.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to implement the Product Description Language ACCOUNT 
   statement, which is used in Product Definition files in product kits

3 PCSI$DELETE_NETWORK_OBJECT.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to implement the Product Description Language NETWORK OBJECT
   statement, which is used in Product Definition files in product kits

3 PCSI$DELETE_RIGHTS_IDENTIFIER.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to implement the Product Description Language RIGHTS 
   IDENTIFIER statement, which is used in Product Definition files 
   in product kits

3 PCSI$EXTRACT_TLB.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to implement part of the PRODUCT EXTRACT PTF command

3 PCSI$REGISTER_PRODUCT.COM
   Command procedure used by the POLYCENTER Software Installation (PCSI)
   utility to register products that were installed using another method
   (such as VMSINSTAL)

3 REGISTER_PRIVILEGED_IMAGE.COM
   Command procedure for Image Registry facility

3 SPKITBLD.COM
   Command procedure to build software product kits

3 STABACKIT.COM
   Builds Standalone Backup on OpenVMS VAX

3 SWAPFILES.COM
   Command procedure that creates swapping, paging, and system dump
   files of appropriate size for system being installed

3 SYS$NET_SERVICES.COM
   Command procedure that examines SYS$STARTUP.COM for network
   services, such as SYS$NET_SERVICES_DECNET.COM, that need
   to be registered

3 SYS$NET_SERVICES_DECNET.COM
   Network service that registers DECnet and DECnet-Plus

3 THREADCP.CLD
   Command definition for THREADCP utility

3 VMS$CHKPWD.EXE
   File that checks the security of the password for installations and
   upgrades

3 VMS$SYSTEM_IMAGES.COM
   Command procedure that operates on VMS$SYSTEM_IMAGES.IDX to
   generate a new system image data file, VMS$SYSTEM_IMAGES.DATA

3 VMSINSTAL.COM
   Command procedure to install EDTCAI and maintenance updates

3 VMSINSTAL_LMFGROUPS.COM
   Data file of LMF information used by VMSINSTAL.COM

3 VMSKITBLD.DAT
   List of files on the OpenVMS system disk.

3 VMSKITBLD.EFI$COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 VMSKITBLD.IDX
   An indexed version of VMSKITBLD.DAT 

3 VMSKITBLD.XML
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 VMSKITBLD.XSD
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 VMSLICENSE.COM
   Command procedure for registering Product Authorization Keys
   (PAKs)

3 VMSMPH.LOG
   Information that is sent to VSI if the MPH tool is installed 

3 VMSMPH.TEMPLATE
   A template for creating a new VMSMPH.LOG

3 VSI$CVT_KIT_DEPENDENCY.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 VSI$PCSI_DATABASE_RESTORE.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

3 VSI$PCSI_DATABASE_SAVE.COM
!**
  This file is included in the latest system build, but
  a description of the file is not available.

2 [TNT.CLIENT]
   Directory containing the OpenVMS Management Station PC client software.
   Use the files in this directory to build the PC client media.

3 TNT$HELPER.EXE
   OpenVMS Management Station server executable that 
   performs low-level, non-interruptable device operations

3 TNT033.EXE
!**
  This file is included in the latest system build, but
  a description of the file is not available.