47 /PROGRESS_REPORT
/PROGRESS_REPORT=n
Use the /PROGRESS_REPORT qualifier to display the progress of
a BACKUP operation on the current output device in every 'n'
seconds. This qualifier expects an integer value from the user
and does not have any default value.
(When you use BACKUP to back up or restore data interactively,
press Ctrl/T to display the progress of the operation.)
48 /PROTECTION
/PROTECTION[=(code)]
Defines the protection you want applied to a save set on a disk
or to a magnetic tape volume. The code indicates the type of
access (read, write, execute, and delete) available to the four
categories of users (system, owner, group, and world).
Protection information applies to all save sets stored on a
tape. If you write the save set to either a Files-11 disk or a
sequential disk without using the /PROTECTION qualifier, the
default is the process default protection.
To initialize a magnetic tape with the correct protection,
specify the output save-set qualifier /REWIND with the
/PROTECTION qualifier. If you do not specify /REWIND with
/PROTECTION, the protection information, if any, in the volume
header record is not changed. However, specifying /PROTECTION
without /REWIND ensures that continuation volumes receive the
correct protection.
49 /RECORD
Records the current date and time in the BACKUP date field of
each file header record once a file is successfully saved or
copied. If you do not specify the /RECORD qualifier, BACKUP does
not change the BACKUP date field of each processed file. Observe
the following restrictions:
o The /RECORD qualifier is valid only with Files-11 Structure
Levels 2 and 5 volumes.
o To use the /RECORD qualifier you must either own the file or
have SYSPRV privileges.
o You cannot use the /RECORD qualifier with the /DELETE
qualifier.
o You can use the /RECORD qualifier in BACKUP save or copy
operations only.
50 /RELEASE_TAPE
Dismounts and unloads a tape after a BACKUP save operation writes
a save set to the tape (and optionally verifies the save set
information on that tape). By using the /RELEASE_TAPE qualifier
in conjunction with either the /DELETE or /RECORD qualifiers, you
can make a tape drive available for other operations before the
BACKUP command completes.
The tape remains allocated until you enter the DEALLOCATE
command.
51 /REPAIR
Helps BACKUP to reset the RMS file attribute of a save set file
which gets corrupted when a save set is transferred via HTTP
or copied using FTP or compressed and uncompressed using ZIP.
You can use the /REPAIR qualifier to repair the save set attributes.
52 /REPLACE
When you use /REPLACE in a copy or restore operation, and an
identically named file exists in both the input and output
specifiers, BACKUP performs the following tasks:
o Copies or restores a new version of the file with the same
directory specification, file name, type, and version number
o Deletes the copy of the file that previously existed on the
output disk
In this way, the previous copy of the file is replaced with the
restored version. Note that the version number is not incremented
because the old copy of the file is deleted. If you want to keep
the versions from both the input and the output specifiers, use
the output file qualifier /NEW_VERSION.
If you do not use /REPLACE, /OVERLAY, or /NEW_VERSION, and the
version number of the file being restored is identical to the
version number of the existing file, BACKUP reports an error and
does not restore the file.
53 /REWIND
/REWIND
/NOREWIND (default)
As an input save-set qualifier, causes the input tape reel to be
rewound (/REWIND) or not rewound (/NOREWIND) to beginning-of-tape
(BOT) before BACKUP searches for the save-set name specified in
the input specifier.
As an output save-set qualifier, specifies that the output
magnetic tape is to be rewound and initialized before the
save operation begins (/REWIND) or that the tape is neither
to be rewound nor initialized before the save operation begins
(/NOREWIND). Initializing the tape removes access to any existing
data on the tape.
If you want to start processing at BOT, and the magnetic tape is
already positioned beyond BOT, specify /REWIND. Otherwise, the
magnetic tape begins (or resumes) processing from the logical
end-of-tape (EOT) marker.
Use the /[NO]REWIND qualifier for magnetic tape save sets only.
54 /SAVE_SET
Defines the input or output specifier as a BACKUP save set.
Normally, BACKUP treats specifiers that refer to disk files as
Files-11 files and specifiers that refer to tapes as BACKUP save
sets.
You must specify the /SAVE_SET qualifier when the input or output
specifier is a BACKUP save set on a Files-11 disk.
55 /SELECT
/SELECT
/SELECT=(file-spec[,...])
Selects the specified files for processing.
If you specify more than one file, separate the file
specifications with commas and enclose the list in parentheses.
Do not use a device specification when you define the files to be
selected. You can use most standard wildcard characters, but you
cannot use wildcard characters denoting latest version of files
(;) and relative versions of files (;-n).
You cannot use the /SELECT qualifier in image save operations.
56 /SINCE
/SINCE=time
Selects files dated equal to or later than the specified date
and time. You can enter the time in either absolute time or delta
time. Specify these time values according to the rules described
in the OpenVMS User's Manual.
You can also specify the time using one of the following options:
BACKUP The BACKUP/RECORD operation (available only on Files-
11 Structure Levels 2 and 5 volumes)
TODAY The current day, month, and year at 00:00:00.0 o'clock
TOMORROW 24 hours after midnight last night
YESTERDAY 24 hours before midnight last night
57 /SIZE
/SIZE = [n]
The logical volume size is recorded in the save-set header during
a backup operation. By default, during a restore operation, the
logical volume size is not preserved because restoring a save
set of 2 GB to a 4-GB disk, for example, results in only 2 GB of
available disk space.
The /SIZE qualifier, however, allows you to preserve the logical
volume size on the target device. Alternatively, you can specify
the logical volume size of the target device by using the
optional keyword value n.
58 /TAPE_EXPIRATION
/TAPE_EXPIRATION=dd-mmm-yyyy
Writes a file expiration date other than the current date to the
file header label of the save set.
VSI recommends that you specify an expiration date whenever you
create a BACKUP save set on magnetic tape using /REWIND. Daily
BACKUP tapes should expire in seven days, weekly BACKUP tapes
should expire in one month, and monthly BACKUP tapes should
expire in one year.
Specify the date in absolute time format, according to the rules
described the OpenVMS User's Manual. If you do not specify an
expiration date, today's date is written to the volume header
record when you perform a save operation using /REWIND.
59 /TRUNCATE
/TRUNCATE
/NOTRUNCATE (default)
Controls whether a copy or restore operation truncates a
sequential output file at the end-of-file (EOF) when creating
it. By default, a copy or restore operation uses the allocation
of the input file to determine the size of the output file.
60 /VERIFY
Specifies that the contents of the output specifier be compared
with the contents of the input specifier after a save, restore,
or copy operation is completed. If a file does not compare
successfully, BACKUP displays an error message.
61 /VOLUME
/VOLUME=n
Indicates that a specific disk volume in a disk volume set is to
be processed. The /VOLUME qualifier is valid only when used with
the /IMAGE qualifier. Using this qualifier allows you to perform
BACKUP operations on a disk volume set when you have only one
disk drive with which to perform BACKUP operations.
62 /WINDOW
/WINDOW=[FULL]LIMITED
Specifies the number of mapping pointers to be allocated for file
windows. By default, file window has 7 mapping pointers and it
increases as file is more fragmented. Window is taken from nonpaged
pool and is charged against process BYTLM quota. This may result
in performance degrade when BACKUP tries to map the 8th extent
of the file. Contiguous files are always completely mapped, but
noncontiguous files may or may not be completely mapped.
You can use the following keywords with the /WINDOW qualifier:
FULL Default full mapping.
LIMITED Optional limited size window.
63 /ZLIB_LEVEL
/ZLIB_LEVEL=n
The /ZLIB_LEVEL qualifier provides a tuning mechanism for the
amount of compression performed and resulting CPU time required
when creating a compressed save set using /DATA_FORMAT=COMPRESS.
The compression value n is required syntax and may range from 1 to 9.
A value of 1 provides only the initial level of compression, using the
least amount of CPU possible. This value corresponds to the need
to finish backups in the smallest time possible but still compressing
the data to some degree. Even with this smallest value, the data
compression can be very dramatic.
A value of 9 provides the highest level of compression, but requires
more CPU time to accomplish. This value corresponds to the need
to produce the smallest backup save sets possible, for example to
fit on a fixed size output media which is near capacity.
If /ZLIB_LEVEL is not specified, BACKUP uses the default compression
value which is equivalent to level 6.
/ZLIB_LEVEL is only valid in conjunction with /DATA_FORMAT=COMPRESS.
It is only used for save set creation. The qualifier is ignored for
restore operations.