NET$MGMT_HELP.HLB  —  actions  Enable

1  –  Alias

1.1  –  Port 

    Pushing the CONTINUE button will cause the specified Alias Port to be
    enabled.  When the Alias Port entity is enabled, the node becomes an
    active member of the VMScluster alias it specifies.

    Pushing the CANCEL button will dismiss the window with no action taken.

2  –  CSMA-CD

2.1  –  Station 

    Enables the specified CSMA-CD Station entity.  The MAC Address represents
    an individual medium access control address for the station.  Pushing the
    CONTINUE button will cause the specified CSMA-CD Station to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

3  –  DDCMP

3.1  –  Link 

    Pushing the CONTINUE button will cause the specified DDCMP Link to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

3.1.1  –  logical_station 

    Pushing the CONTINUE button will cause the specified DDCMP Link Logical
    Station entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

4  –  event_dispatcher 

    Pushing the CONTINUE button will cause the Event Dispatcher to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.1  –  outbound_stream 

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Outbound Stream to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.2  –  relay 

    Pushing the CONTINUE button will cause the Event Dispatcher Relay to be
    enabled so that events from DECnet Phase IV systems will be processed
    and posted into the DECnet-Plus logging system.

    Enabling the Event Dispatcher Relay will automatically create and
    enable the three Event Dispatcher Relay Logging entities (Console,
    File and Monitor).  If you wish, each of these logging entities can
    be disabled and reenabled individually.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.2.1  –  Logging 

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Relay Logging to be enabled (either Console, Monitor or File).

    Enabling the Console logging will cause Phase IV events to be logged
    to the operator console (OPA0).

    Enabling the Monitor logging will cause Phase IV events to be logged
    to the Operator Communication Facility (OPCOM).

    Enabling the File logging will cause Phase IV events to be recorded
    in binary format.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.3  –  Sink 

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Sink to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

5  –  FDDI

5.1  –  Station 

    Pushing the CONTINUE button will cause the specified FDDI Station to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

6  –  FRAME 

    Pushing the CONTINUE button will cause the FRAME entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

6.1  –  Link 

    Pushing the CONTINUE button will cause the specified FRAME Link to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

7  –  HDLC

7.1  –  Link 

    Pushing the CONTINUE button will cause the specified HDLC Link to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

7.1.1  –  logical_station 

    Pushing the CONTINUE button will cause the specified HDLC Link Logical
    Station to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

8  –  MODEM

8.1  –  line 

    Pushing the CONTINUE button will cause the Modem Connect Line entity to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

9  –  MOP 

    Pushing the CONTINUE button will cause the MOP entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

10  –  nsp 

    Pushing the CONTINUE button will cause the NSP entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

11  –  Osak 

    Pushing the CONTINUE button will cause the specified OSAK entity to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

12  –  osi_transport 

    Pushing the CONTINUE button will cause the OSI Transport entity to be
    enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13  –  Routing 

    Pushing the CONTINUE button will cause the Routing entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1  –  Circuit 

    Pushing the CONTINUE button will cause the specified Routing Circuit to
    be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.1  –  ip_reachable_address 

    Pushing the CONTINUE button will cause the specified Routing Circuit IP
    Reachable Address to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.2  –  reachable_address 

    Pushing the CONTINUE button will cause the specified Routing Circuit
    Reachable Address to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.2  –  egp_group 

    Pushing the CONTINUE button will cause the specified Routing EGP Group
    to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.2.1  –  egp_neighbor 

    Pushing the CONTINUE button will cause the specified Routing EGP Group's
    EGP Neighbor to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

14  –  session 

    Pushing the CONTINUE button will cause the Session Control Entity
    to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

15  –  x25_access 

    Pushing the CONTINUE button will cause X.25 Access entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

16  –  app 

    Pushing the CONTINUE button will cause the specified X.25 Access Application
    entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

17  –  x25_client 

    Pushing the CONTINUE button will cause the specified X.25 Client entity
    to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

18  –  x25_relay

18.1  –  client 

    Pushing the CONTINUE button will cause the specified X.25 Relay Client
    entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

18.2  –  pvc 

    Pushing the CONTINUE button will cause the specified X.25 Relay PVC entity
    to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

19  –  x25_server 

    Pushing the CONTINUE button will cause the X.25 Server entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

19.1  –  client 

    Pushing the CONTINUE button will cause the specified X.25 Server Client
    entity to be enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.

20  –  x25_protocol

20.1  –  dte 

    Pushing the CONTINUE button will cause the specified X.25 Protocol DTE
    entity enabled.

    Pushing the CANCEL button will dismiss the window with no action taken.
Close Help