on The entity is enabled. o uid Entity's unique identifier, which is generated when the entity is created. 3 pvc show [node node-id] x25 relay - pvc pvc-name attribute [,attribute...] all [attributes] all characteristics all counters all identifiers all status 4 Characteristics o local PVC Default: No PVC name Value: Simple name Name of the PVC entity that represents the local end of the connection. o remote DTE class Default: No DTE class Value: Simple name DTE class to be used when setting up the remote end of the connection. It is only specified if the relayed PVC does not reside on the local system. This attribute is only applicable to connector nodes, and will not be visible in other implementations. o remote PVC Default: No PVC name Value: Simple-name Name of the PVC entity that represents the relayed end of the connection. o retry limit Default: 10 Value: 0-65535 Number of attempts that will be made to set up the PVC connection following the failure of an enable command. This attribute is only applicable to connector nodes, and will not be visible in other implementations. o retry timer Default: 60 Value: 1-65535 Interval, in seconds, between retries. This attribute is only applicable to connector nodes, and will not be visible in other implementations. o rights identifiers Default: No rights identifiers Value: Set of simple names Rights identifiers possessed by this entity. These rights are used to access the local PVC and relayed PVC if it resides on the local system. 4 Counters o connections made Number of successful connections made by this entity. o creation time Time at which this entity was created. o times connections lost Number of times that a successfully established PVC connection has been abnormally terminated. o times retry limit exceeded Number of times that the retry limit has been reached when trying to set up a PVC connection. 4 Identifier o name Simple name assigned to the PVC when it is created. 4 Status o state State of the x25 relay pvc entity. failed The retry mechanism has failed to set up the connection. off The PVC is disabled. on The PVC is enabled. retrying The Retry timer is running. o uid Entity's unique identifier, which is generated when the entity is created. 2 x25_server show [node node-id] x25 server attribute [,attribute...] all [attributes] all characteristics all counters all status 3 Characteristics o incoming session template (Tru64 UNIX) The Session Control template specified on an OpenIncoming invocation at the End User Session Control interface. You cannot modify this characteristic. o maximum session connections Default: 512 Value: [1..65535] Maximum number of session control connections with clients that the entity can support. This includes both incoming and outgoing connections. You cannot modify this characteristic. o version Default: Current version number Version number of the X.25 Gateway Access Protocol to which the implementation conforms. You cannot modify this characteristic. 3 Counters o connection attempts failed Number of session control connection requests to clients that have failed, due either to exceeding the maximum number of connections or rejection by X.25 clients in accessing systems. o creation time Time at which this entity was created. o times session control unavailable Number of times the session control unavailable event was raised. 3 Status o active inbound session connections Current number of active inbound session control connections with clients. o active outbound session connections Current number of active outbound session control connections with clients. o state Current state of the x25 server entity. off The x25 server entity is disabled. on The x25 server entity is enabled. o uid Specifies the entity's unique identifier, which is generated when the entity is created. 3 client show [node node-id] x25 server - client client-name attribute [,attribute...] all [attributes] all characteristics all identifiers all status 4 Characteristics o account (OpenVMS) Default: No service/account data Value: String Default service or account data to be used when connecting to the system hosting the X.25 client. o application Default: 36 Value: End-user-specification Address information used by the destination Session Control module to select the X.25 client that will receive the connection request. o destination (OpenVMS) Default: No client name Value: Full-name Name of the X.25 client to which a connection is to be made when delivering a "filtered" call. o filters Default: No default Value: Set of simple names Set of filters to be used by the server to filter calls for this X.25 client. Each name is the name of an x25 access filter entity. o node Default: No node name Value: Full-name Name of the node that hosts the X.25 client to which connection is to be made. This characteristic is supported only if the service nodes characteristic is not supported. o outgoing session template (OpenVMS) Default: Default template Value: Simple-name Transport template to be used by the X.25 server to set up a session control connection to the X.25 client. The name is the name of an osi transport template entity. o password Default: No password Value: String Default password to be used for verification when connecting to the system that hosts the X.25 client. You cannot display this characteristic with the show command. o service nodes (Tru64 UNIX) Default: Empty set Value: Set of candidate records Set of nodes that host the x25 client entities to which connections can be made. o user Default: No user id Value: String Default user identification to be used in access verification when connecting to the system that hosts the X.25 client. 4 Identifier o name Simple name assigned to the client when it is created. 4 Status o state Status of the x25 server client entity. off The x25 server client entity is disabled. on The x25 server client entity is enabled. 3 security_nodes show [node node-id] x25 server - security nodes simple-name attribute [,attribute...] all [attributes] all characteristics all counters all identifiers all status 4 Characteristics o nodes Default: No node names Value: Set of full-name DNS full names of accessing systems, or the wildcard full name. o rights identifiers Default: No rights identifiers Value: Set of simple names Set of rights identifiers to be associated with the set of nodes named in the nodes characteristic for purposes of access control to DTE classes at the gateway node. 4 Counters o creation time Time at which this entity was created. o outgoing calls blocked Number of times that an attempt to establish a call or use a PVC has failed for security reasons. 4 Identifier o name Simple name assigned to the security node when it is created. 4 Status o uid Entity's unique identifier, which is generated when the entity is created. 2 xot_(OpenVMS_Alpha) Shows the X.25 Over TCP/IP module and its attributes. show [node node-id] xot attribute [,attribute...] all [attributes] all characteristics all status Examples: show xot currently active connections show xot maximum connections PORT and SAP are subentities of XOT. 3 Characteristics o version The version of the XOT implementation, initially "1.0.0". You cannot modify this characteristic. o maximum connections Default: 256 Value: 1-65535 The maximum number of connections allowed. Note that each XOT SAP LINK entity is limited to 4095 connections. The Maximum Connections attribute sets the limit for connections over all existing XOT SAP LINK entities. 3 Status o uid The universal identifier of the XOT module, which is generated when the entity is created. o currently active connections The number of currently active XOT connections, that is, the number of XOT PORTs. 3 port Shows a XOT PORT entity which provides information on an active XOT connection over TCP/IP. Ports are created and deleted dynamically as X.25 connections are requested. show [node node-id] xot - port port-name attribute [,attribute...] all [attributes] all counters all identifiers all status The port-name can be either a wildcard, or it can be a simple name that uniquely identifies a particular port instance. XOT port-names are automatically created in the form XOT-port-xxxx, where xxxx is a 4 digit hexadecimal value indicating the port number. Examples: show xot port * client, link, direction show xot port XOT-port-0000 all 4 Counters o creation time The time that the port entity was created. o octets received The number of data octets received from TCP/IP for the port. o octets sent The number of data octets sent to TCP/IP from the port. o pdus received The number of data PDUs (X.25 packets) received from TCP/IP. o pdus sent The number of data PDUs (X.25 packets) sent to TCP/IP. 4 Identifiers o name The simple name assigned to the port when it was created. It will consist of xot-port-xxxx, where xxxx is the hexadecimal representation of the connection id. 4 Status o client The client of the port, that is, the name of the X25 PROTOCOL DTE entity. o link The XOT SAP LINK entity with which this port is associated. o protocol state The state of the XOT protocol over this port: Idle The port is idle. Running The port is running. Connecting The entity is making an X.25 connection. Failed The port connection failed. o direction Whether the port is inbound or outbound. o type The type of X.25 connection: PVC or SVC. o uid The universal identifier of the PORT entity, which is generated when the entity is created. 3 sap Shows a XOT SAP entity which specifies the point at which the XOT entity gains access to the TCP/IP environment for the purposes of listening for inbound XOT connections. show [node node-id] xot - sap sap-name attribute [,attribute...] all [attributes] all characteristics all counters all identifiers all status The sap-name can be either a simple name that uniquely identifies a particular SAP instance, or a wildcard to identify multiple SAP instances. Examples: show xot sap * all show xot sap sap-0 local ip address, state LINK is a subentity of XOT SAP. 4 link Shows a XOT SAP LINK entity which represents a remote system with which XOT is allowed to communicate. show [node node-id] xot - sap sap-name link link-name attribute [,attribute...] all [attributes] all characteristics all counters all identifiers all status The sap-name must be a simple name which uniquely identifies a particular SAP instance. The link-name can be either a simple name that uniquely identifies a particular LINK instance, or a wildcard to identify multiple LINK instances. Examples: show xot sap sap-0 link * remote IP address, state show xot sap sap-0 link link-0 all 5 Characteristics o remote IP address Default: 0.0.0.0 Value: IP Address Specifies the remote IP address of the cooperating XOT system that implements RFC1613. The IP address is specified as a numeric address in the form a.b.c.d. o remote rfc1613 port number Default: 1998 Value: TCP port number Specifies the TCP port number to use for an outgoing connection. The remote system must be listening for inbound XOT connections on this port. 5 Counters o creation time The time that the XOT SAP LINK entity was created. o connects sent The number of connection requests sent. o connects received The number of connection requests received. o disconnects sent The number of disconnect requests sent. o disconnects received The number of disconnects received. o octets sent The number of data octets sent from TCP/IP for all ports on the link. o octets received The number of data octets received from TCP/IP for all ports on the link. o pdus sent The number of X.25 packets sent from TCP/IP for all ports on the link. o pdus received The number of X.25 packets received from TCP/IP for all ports on the link. o connects failed The number of times an attempt to establish an outgoing connection failed. o link state changed The number of times that the link has changed state from enabled to disabled or disabled to enabled. o protocol errors The number of protocol errors that occurred. 5 Identifiers o name The simple name assigned to the LINK entity when it was created. 5 Status o state The state of the LINK entity: On The LINK is enabled Off The LINK is disabled o uid The universal identifier of the LINK entity, which is generated when the entity is created. 4 Characteristics o local IP address Default: 0.0.0.0 Value: IP Address The IP interface (identified by the address) where the SAP entity will listen. Any available interface is specified with the address of 0.0.0.0. This characteristic is mainly set when a system has multiple TCP/IP interfaces. By default, XOT's single SAP entity is configured to listen on all available IP interfaces (as specified by the local IP address 0.0.0.0). You can create multiple SAP entities, each listening on a unique IP address. However, if you create more than one SAP entity, you must assign each entity a unique IP address; no SAP entity can use the 0.0.0.0 address. o local RFC1613 port number Default: 1998 Value: TCP port number The port number on which the SAP entity will listen for inbound XOT connections. HP strongly recommends that you use the value 1998 as specified in RFC1613. 4 Counters o creation time The time that the XOT SAP entity was created. o connections rejected The number of times an inbound connection was rejected. o sap state changed The number of times that the SAP entity state changed. 4 Identifiers o name The simple name assigned to the SAP entity when it was created. 4 Status o state The state of the SAP entity: On The entity is enabled. Off The entity is disabled. Connecting To PWIP The entity is connecting to TCP/IP. o uid The universal identifier of the SAP entity, which is generated when the entity is created.