show [node node-id] x25 access -
template template-name attribute [,attribute...]
all [attributes]
all characteristics
all identifiers
Examples:
show x25 access template * name
show x25 access template "OSI Transport" all
1 – Characteristics
o call data
Default: No call user data Value: Hex string
Call user data to be sent in the call.
o calling address extension
Default: No NSAP address Value: NSAP address
Calling Network Service Access Point (NSAP) address is to be
passed to a higher-level entity within the called DTE. A null
address indicates that this facility is not included in the
outgoing call.
o charging information
Default: False Value: True or false
Specifies whether charging information is requested for this
call.
o destination dte address
Default: No DTE address Value: DTE address
Address of the remote DTE, including the remote subaddress (if
any), to which the call is directed.
o dte class
Default: No DTE class name Value: Class name
Name of the DTE class to be used for the call.
o end-to-end delay
Default: [0..0] Value: Range (see description)
Lower and upper bounds of the acceptable end-to-end delay for the
call. A zero value for either bound indicates that no range is
included in the outgoing call.
o expedited data
Default: Not specified Value: See description
Specifies whether expedited data is requested for the call.
do not use Expedited data is not in use.
not specified Expedited data is not requested.
use Expedited data is in use.
o fast select
Default: Not specified Value: See description
Specifies whether fast select is requested for the call.
fast select Fast select is in use.
no fast select Fast select is not in use.
not specified Fast select is not requested.
with response Fast select with response is in use.
o local facilities
Default: No facilities Value: Hex string
Non-CCITT facilities that are available from the local PSDN.
The string is placed in the outgoing call request packet without
modification. The contents and interpretation of this string are
implementation-dependent.
o local subaddress
Default: No DTE address Value: DTE address
Local subaddress to be appended to the calling DTE address in the
call.
o network user identity
Default: No network user identity Value: Hex string
Network user identity to be included in the call packet. The
format of the network user identity is specified by the PSDN
administration.
o nsap mapping
Default: False Value: True or false
Specifies whether an x25 access reachable address entity is used
to map the supplied NSAP address to a destination DTE class/DTE
address pair.
o packet size
Default: Supplied by profile Value: 0-4096
Packet size, in octets, for transmitted and received data
packets. The value must be a power of 2 in the range 0 to 4096.
The value zero indicates that no packet size is included in the
outgoing call.
o quality of service
Default: No data Value: Hex string
Quality of service data. The contents and interpretation of this
string are implementation-dependent.
o reverse charging
Default: False Value: True or false
Specifies whether reverse charging is requested for the call.
o rpoa sequence
Default: No DTE address Value: Set of DTE addresses
Private Operating Agency sequence of transit networks to be used
in setting up the call. Format the values to specify a set of
DTE addresses. Each DTE address is four digits long. An empty set
indicates that no sequence is included in the outgoing call.
o selected group
Default: No group name Value: Group name
Name of the x25 protocol group entity that represents the CUG
selected for the call. The index for group is included in the
facility field of the call request packet.
o target address extension
Default: No NSAP address Value: NSAP address
Called NSAP address to be sent to the called DTE should be
supplied by a higher-level entity in the calling DTE. A null
address indicates that this facility is not required.
o throughput class request
Default: [0..0] Value: Range (see the following
description)
Minimum acceptable throughput class (the lower bound of the
range) and the target throughput class (the upper bound of the
range) for a call. The only legal range values are as follows:
0 2400
75 4800
150 9600
300 19200
600 48000
1200
The range 0-0 indicates that no throughput class is included in
the outgoing call.
o transit delay selection
Default: 0 Value: Integer
Desired transit delay. A zero value indicates
that no value is included in the outgoing call.
o window size
Default: Supplied by profile Value: 0-127
Window size for transmitted and received data packets. A zero
value indicates that no window size is included in the outgoing
call.
2 – Identifier
o name
Name assigned to the template when it is created.