1  –  dte

    Modifies the Outgoing List attribute of a given X25 Protocol
    DTE instance to remove the specified range or ranges.

    remove  [node node-id] x25 protocol dte dte-name -
          outgoing list {range[,range...]}

    Outgoing List

    Default: [1...4095]    Value: Set of range (0-4095)

    Channel number ranges that define the LCNs that are available
    for calls on outgoing or two-way channels. Format the values to
    specify a set of channel number ranges. Each channel number is
    the concatenation of the logical channel group number and logical
    channel number of an SVC on the DTE.

    Example:

    remove x25 protocol dte dte-0 outgoing list {[10..4095]}

2  –  group

    Modifies the Members attribute of a given X25 Protocol Group
    instance to remove the specified member record or records.

    remove  [node node-id] x25 protocol group group-name -
          members {record[,record...]}

    Members

    Default: No DTEs       Value: Set of records

    DTEs at a gateway system that make up the group. Format the
    values to specify a set of records. Each record consists of a
    name that identifies an X25 protocol dte entity and an integer
    (in the range 0 to 9999) that identifies the CUG number assigned
    by the network. If a DTE is already created and enabled and is
    then added to the set of members, it must be disabled and re-
    enabled to service the specified CUG number or BCUG.

    Example:

    remove x25 protocol group group1 -
          members {[dte = dte-1, index = 4444], -
                   [dte = dte-0, index = 8787]}