Use the REMOVE directive to remove value(s) from a
characteristic attribute.
You can use the REMOVE directive on all Subordinate
Reference characteristic attributes.
Syntax:
REMOVE DSA SUBORDINATE REFERENCE <name> <attr> {<value>,...}
where <name> is the identifier of a Subordinate Reference entity,
<attr> is the name of the characteristic attribute and <value> is
the value you want to remove from the attribute.
9.2.6 – SET
Use the SET directive to change the value of a Subordinate
Reference characteristic attribute.
You can use the SET directive on all characteristic attributes
of the Subordinate Reference entity.
Syntax:
SET DSA SUBORDINATE REFERENCE <name> <attr> {<value>,...}
where <name> is the name of the Subordinate Reference entity,
<attr> is the name of the Characteristic attribute and
<value> is the value you want to set for the attribute.
9.2.7 – SHOW
Use the SHOW directive to display the characteristic attributes of a Subordinate Reference entity. You can use the SHOW directive on all Characteristic attributes of the Subordinate Reference entity. Syntax: SHOW DSA SUBORDINATE REFERENCE <name> <attr> where <attr> is the name of the Characteristic attribute you want to display. You can display the values of multiple attributes using one SHOW directive by separating the attributes with a comma, for example: SHOW DSA SUBORDINATE REFERENCE <name> <attr1>, <attr2> You can also use the wildcard "*" in a SHOW directive, to show details of all subordinate references; for example: SHOW DSA SUBORDINATE REFERENCE * <attr>
9.3 – Identifier
The identifier of a Subordinate Reference entity is the distinguished name of the entry to which the entity provides a reference, for example, "/C=US/O=Abacus/OU=Accounts". The identifier of a Subordinate Reference entity is the same as the identifier of a Naming Context entity held by some other DSA. Thus the entity provides a reference to the remote naming context. It is possible for the Subordinate Reference entity to be on the same DSA as the Naming Context entity to which it provides a reference. Refer to DSA Common_Datatypes for more information on how to specify a distinguished name. Refer to the CREATE directive for more information on how to create a Subordinate Reference entity.
10 – Superior Reference
A Superior Reference entity provides a reference to a DSA that holds a naming context that is higher in the DIT than all of the naming contexts held locally. The DSA that holds superior information should have further knowledge information that enables the user request to be redirected to the relevant DSA. Such a DSA might have knowledge about parts of the DIT that this DSA does not know about.
10.1 – Characteristics
A Superior Reference entity has one characteristic attribute:
Access Point.
You can use the ADD, SET, SHOW and REMOVE directives on this
attribute.
Syntax:
ADD DSA SUPERIOR REFERENCE ACCESS POINT {<value>}
REMOVE DSA SUPERIOR REFERENCE ACCESS POINT {<value>}
SET DSA SUPERIOR REFERENCE ACCESS POINT {<value>}
SHOW DSA SUPERIOR REFERENCE ACCESS POINT
where <value> is the value. The Access Point attribute is
single-valued.
10.1.1 – Access Point
This specifies the Access Point of the DSA which holds
a naming context which is superior to all of the naming
contexts held within this DSA. There is no default value.
The attribute is single-valued.
Syntax:
ADD DSA SUPERIOR REFERENCE ACCESS POINT {<value>}
REMOVE DSA SUPERIOR REFERENCE ACCESS POINT {<value>}
SET DSA SUPERIOR REFERENCE ACCESS POINT {<value>}
SHOW DSA SUPERIOR REFERENCE ACCESS POINT
where <value> is the access point of a DSA that holds a master
copy of a naming context that is higher than all naming contexts
on this DSA, and is specified as follows:
[ae title = "<distinguished name of DSA>",
presentation address = '<presentation address>']
The AE Title and Presentation Address attributes are both
mandatory. Note that you must specify the AE Title and
Presentation Address in the order shown above.
Specify all valid NSAPs for the DSA in the access point. This
improves the network efficiency of the DSA, ensuring that if
a connection to the relevant DSA already exists, it is always
re-used.
Refer to DSA Common_Datatypes for more information
on how to specify an AE Title and a Presentation Address.
10.2 – Directives
You can use the CREATE, DELETE, SET and SHOW directives with the Superior Reference entity. The CREATE and DELETE directives are used to create and delete a Superior Reference entity. The SET and SHOW directives are used to set or display the Superior Reference characteristic attribute, respectively. Note that the only characteristic attribute of the Superior Reference entity is single valued. The ADD and REMOVE directives can therefore only be used to remove the single value, or to add a value if there is no existing value.
10.2.1 – ADD
Use the ADD directive to add value to the
Access Point attribute if it does not already have one.
Syntax:
ADD DSA SUPERIOR REFERENCE <attr> {<value>}
where <attr> is the name of the Characteristic
attribute and <value> is the value you want to add to
the attribute. Note that the Access Point attribute
is single-valued, so you can only use the ADD directive
if the Access Point currently has no value.
10.2.2 – CREATE
Use this directive to create a Superior Reference entity. Syntax: CREATE DSA SUPERIOR REFERENCE <argument> <value>
10.2.2.1 – Arguments
The CREATE directive has one argument: ACCESS POINT. This argument
is optional, although a Superior Reference entity without an
Access Point attribute serves no purpose. You can specify the
Access Point attribute using the SET directive instead.
The ACCESS POINT argument identifies a DSA holding a naming context
which is superior to all the naming contexts contained within this
DSA. Specify the ACCESS POINT argument in the following format:
ACCESS POINT <access point>
where <access point> is the access point of the DSA and is
specified as follows:
{[ae title = "<distinguished name of DSA>",
presentation address = '<presentation address>']}
The AE Title and Presentation Address attributes are both mandatory.
Note that you must specify the AE Title and Presentation
Address in the order shown above.
Specify all valid NSAPs for the DSA in the access point. This
improves the network efficiency of the DSA, ensuring that if
a connection to the relevant DSA already exists, it is always
re-used.
Refer to DSA Common_Datatypes for more information on
how to specify an AE Title and a Presentation Address.
10.2.2.2 – Errors
The CREATE directive returns one of the following errors: REASON: Already Exists DESCRIPTION: The Superior Reference entity already exists. REASON: Wrong State DESCRIPTION: The DSA entity is not in the correct state. The DSA entity must be in state ON, ENABLING, DISABLING or OFF when you create a Superior Reference entity. Any other state causes a failure. The response indicates the current state of the DSA.
10.2.3 – DELETE
Use this directive to delete the Superior Reference entity. Syntax: DELETE DSA SUPERIOR REFERENCE
10.2.3.1 – Errors
The Delete directive returns one error only: REASON: Wrong State DESCRIPTION: The DSA entity is not in the correct state. The DSA entity must be in state ON, ENABLING, DISABLING or OFF when you delete a Superior Reference entity. Any other state causes a failure. The response indicates the current state of the DSA.
10.2.4 – Examples
> CREATE DSA SUPERIOR REFERENCE -
_> ACCESS POINT {[AE Title="/C=US/O=Abacus/CN=DSA5", -
_> Pres Addr='"DSA"/"DSA"/"DSA"/NS+49002aaa000400888888']}
> SHOW DSA SUPERIOR REFERENCE ALL ATTRIBUTES
The first command creates a Superior Reference entity and
defines the access point of the DSA which holds a naming
context superior to all naming contexts contained within
this DSA. Note that the command specifies no identifier
for the Superior Reference entity.
The second command displays the Superior Reference entity.
> DELETE DSA SUPERIOR REFERENCE
This command deletes the Superior Reference entity.
10.2.5 – REMOVE
Use the REMOVE directive to remove a value from
the Access Point attribute.
Syntax:
REMOVE DSA SUPERIOR REFERENCE <attr> {<value>}
where <attr> is the name of the Characteristic
attribute and <value> is the value of the attribute.
Note that the Access Point attribute is single-valued,
so there is only ever one value for you to remove.
10.2.6 – SET
Use the SET directive to change the value of the Superior
Reference characteristic attribute.
Syntax:
SET DSA SUPERIOR REFERENCE ACCESS POINT {<value>}
where <value> is the value you want to set for the attribute.
10.2.7 – SHOW
Use the SHOW directive to display the characteristic attribute of a Superior Reference entity. Syntax: SHOW DSA SUPERIOR REFERENCE ACCESS POINT