16 – RLOCK
The MONITOR RLOCK command initiates monitoring of the RLOCK
(dynamic lock remastering) statistics class.
Format
MONITOR RLOCK
16.1 – Classname Qualifiers
16.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum and maximum) is to be included in the display
and summary outputs. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
16.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
16.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
16.1.4 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
16.1.5 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.
17 – RMS
The MONITOR RMS command initiates monitoring of the OpenVMS
Record Management Services (OpenVMS RMS) statistics class for
a specific file.
Format
MONITOR RMS
17.1 – Classname Qualifiers
17.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum, and maximum) is to be included in the display
and summary output. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
17.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
17.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
17.1.4 /FILE
/FILE=(file-name[,...])
Specifies a list of one or more files to which the MONITOR RMS
command applies.
17.1.5 /ITEM
/ITEM=(keyword[,...])
Selects one or more data items for inclusion in display and
summary outputs. If you specify two or more keywords, enclose
them in parentheses, and separate them with commas. When the
/ITEM qualifier is omitted, the default is /ITEM=OPERATIONS.
The following table describes /ITEM qualifier keywords:
Keyword Description
OPERATIONS Specifies that RMS basic operations statistics are
displayed for the selected file.
DATA_RATES Specifies that RMS data rate statistics are
displayed for the selected file.
LOCKING Specifies that RMS locking statistics are displayed
for the selected file.
CACHING Specifies that RMS caching statistics are displayed
for the selected file.
17.1.6 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
17.1.7 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.
18 – SCS
The MONITOR SCS command initiates monitoring of the System
Communications Services (SCS) class.
Format
MONITOR SCS
18.1 – Classname Qualifiers
18.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum, and maximum) is to be included in the display
and summary output. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
18.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
18.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
18.1.4 /ITEM
/ITEM=(keyword[,...])
Selects one or more data items for inclusion in display and
summary outputs. If you specify two or more keywords, enclose
them in parentheses, and separate them with commas. When the
/ITEM qualifier is omitted, the default is /ITEM=KB_MAP.
The following table describes /ITEM qualifier keywords:
Keyword Description
ALL Specifies that statistics on all data items
collected for the disks are displayed on
successive screens.
BUFFER_ Specifies that statistics on the queued-for-
DESCRIPTOR buffer-descriptor (on the local node) rate are
displayed for each node.
D_DISCARD Specifies that datagram discard rate statistics
are displayed for each node.
D_RECEIVE Specifies that datagram receive rate statistics
are displayed for each node.
D_SEND Specifies that datagram send rate statistics are
displayed for each node.
KB_MAP Specifies that kilobyte map rate statistics are
displayed for each node.
KB_REQUEST Specifies that kilobyte request (via request
datas) rate statistics are displayed for each
node.
KB_SEND Specifies that kilobyte send (via send datas)
rate statistics are displayed for each node.
M_RECEIVE Specifies that message receive rate statistics
are displayed for each node.
M_SEND Specifies that message send rate statistics are
displayed for each node.
REQUEST_DATA Specifies that request data (initiated on the
local node) rate statistics are displayed for
each node.
SEND_CREDIT Specifies that queued-for-send-credit (on the
local node) rate statistics are displayed for
each node.
SEND_DATA Specifies that send data (initiated on the local
node) rate statistics are displayed for each
node.
18.1.5 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
18.1.6 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.
18.1.7 /PERCENT
/PERCENT
/NOPERCENT (default)
Controls whether statistics are expressed as percent values in
display and summary outputs. The /PERCENT qualifier is applicable
only to the DISK, MODES, SCS, and STATES classes.
19 – STATES
The MONITOR STATES command initiates monitoring of the PROCESS
STATES class, which shows the number of processes in each of the
14 scheduler states.
Format
MONITOR STATES
19.1 – Classname Qualifiers
19.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum, and maximum) is to be included in the display
and summary output. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
19.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
19.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
19.1.4 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
19.1.5 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.
19.1.6 /PERCENT
/PERCENT
/NOPERCENT (default)
Controls whether statistics are expressed as percent values in
display and summary outputs. The /PERCENT qualifier is applicable
only to the DISK, MODES, SCS, and STATES class names.
20 – SYSTEM
The MONITOR SYSTEM command initiates monitoring of the SYSTEM
statistics class, which shows several of the most important items
from other classes.
Format
MONITOR SYSTEM
20.1 – Classname Qualifiers
20.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum, and maximum) is to be included in the display
and summary output. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
20.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
20.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
20.1.4 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
20.1.5 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.
21 – TIMER
The MONITOR TIMER command initiates monitoring of the TIMER
statistics class, which is the rate of processing Timer Queue
Entries (TQEs) by the OpenVMS executive. A TQE is a data
structure representing a timer request made by a user or by the
system.
Format
MONITOR TIMER
21.1 – Classname Qualifiers
21.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum and maximum) is to be included in the display
and summary outputs. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
21.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
21.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
21.1.4 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
21.1.5 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.
22 – TRANSACTION
The MONITOR TRANSACTION command initiates monitoring of the
TRANSACTION class, which shows information about transactions
coordinated by DECdtm services.
Format
MONITOR TRANSACTION
22.1 – Classname Qualifiers
22.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum, and maximum) is to be included in the display
and summary output. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
22.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
22.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
22.1.4 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
22.1.5 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.
23 – VBS
On VAX systems, the MONITOR VBS command displays information
about the processing of virtual balance slots (VBS).
Format
MONITOR VBS
24 – VECTOR
The MONITOR VECTOR command displays the number of 10-millisecond
clock ticks per second in which one or more vector consumers have
been scheduled on each currently configured vector processor in
the system.
Format
MONITOR VECTOR
24.1 – Classname Qualifiers
24.1.1 /ALL
Specifies that a table of all available statistics (current,
average, minimum, and maximum) is to be included in the display
and summary output. For summary output, this qualifier is the
default for all classes; otherwise, it is the default for all
classes except CLUSTER, MODES, PROCESSES, STATES, SYSTEM, and
VECTOR.
24.1.2 /AVERAGE
Specifies that a bar graph of average statistics is to be
included in the display and summary outputs.
24.1.3 /CURRENT
Specifies that a bar graph of current statistics is to be
included in the display and summary outputs. The /CURRENT
qualifier is the default for the CLUSTER, MODES, STATES, SYSTEM,
and VECTOR classes.
24.1.4 /MAXIMUM
Specifies that a bar graph of maximum statistics is to be
included in the display and summary outputs.
24.1.5 /MINIMUM
Specifies that a bar graph of minimum statistics is to be
included in the display and summary outputs.