1 – DEVICE
Displays information in the LAN permanent device database.
Format
LIST DEVICE device-name
1.1 – Parameter
device-name
Supplies the LAN controller device name. The device name has
the form ddcu where dd is the device code, c is the controller
designation, and u is the unit number. LAN devices are specified
as the name of the template device which is unit 0. For example,
the first DE435 Ethernet device is specified as EWA0, the second
as EWB0.
For example, you can specify a DEMNA controller as EXA, EXA0,
or EXA0:. This refers to the LAN template device, for which is
maintained most of the device parameters and counters. Also, the
device name can refer to a device unit representing an actual
user or protocol. For example, the cluster protocol can be
started on a device as EWA1. You can specify a device unit to
view unit-specific parameter information.
If you do not specify a device name, all devices are displayed.
If you specify a device name, all matching LAN devices are
displayed, for example: E to select all Ethernet devices, F
for FDDI, I for Token Ring, EW to select all Ethernet PCI Tulip
devices.
NOTE
If you do not specify a qualifier, the utility displays the
matching devices without additional information.
1.2 – Qualifiers
1.2.1 /ALL
Lists all devices in the LAN permanent device database.
1.2.2 /CHARACTERISTICS
/CHARACTERISTICS or /PARAMETERS
Lists status and related information about the device.
1.2.3 /DLL
/DLL or /MOPDLL
Displays MOP downline load characteristics.
1.2.4 /MAP
Lists the current configuration of the functional address mapping
table for a Token Ring device.
1.2.5 /OUTPUT
/OUTPUT=file name
Creates the specified file and directs output to it.
1.2.6 /SR_ENTRY
Lists the contents of the current source routing cache table.
1.2.7 /TRACE
Lists driver trace parameters set for the device.
1.3 – Examples
1.LANCP> LIST DEVICE/DLL
Device Listing, permanent database:
--- MOP Downline Load Service Characteristics ---
Device State Access Mode Clients Data Size
------ ----- ----------- ------- ---------
EXA0 Enabled Exclusive KnownClientsOnly 1400 bytes
FXA0 Disabled NoExclusive NoKnownClientsOnly 246 bytes
This command displays MOP downline load information in the LAN
permanent device database for all known devices.
2 – NODE
Displays information in the LAN permanent node database,
especially MOP downline load information.
Format
LIST NODE node-name
2.1 – Parameter
node-name
Specifies the node name. The name can include up to 63 characters
associated with the node address. If no node name is given, all
nodes are displayed.
2.2 – Qualifiers
2.2.1 /ALL
Displays data for all nodes in the LAN permanent node database.
If you specify a node name, all matching nodes are selected; for
example, A/ALL selects all nodes beginning with A.
2.2.2 /OUTPUT
/OUTPUT=file-name
Creates the specified file and directs output to that file. If
the file extension is .com, the output is in the form of a list
of DEFINE NODE or SET NODE commands. The resulting command file
can be used to create the LAN node databases.
2.3 – Example
LANCP> LIST NODE
Node Listing:
GALAXY (08-00-2B-2C-51-28):
MOP DLL: Load file: APB.EXE
Load root: $64$DIA24:<SYS11.>
Boot type: Alpha satellite
ZAPNOT (08-00-2B-18-7E-33):
MOP DLL: Load file: NISCS_LOAD.EXE
Load root: LAVC$SYSDEVICE:<SYS10.>
Boot type: VAX satellite
CALPAL (08-00-2B-08-9F-4C):
MOP DLL: Load file: READ_ADDR.SYS
Last file: LAN$DLL:APB_X5WN.SYS
Boot type: Other
2 loads requested, 1 volunteered
1 succeeded, 0 failed
Last request was for a system image, in MOP V4 format
Last load initiated 30-OCT-1994 09:11:17
on EXA0 for 00:00:06.65
527665 bytes, 4161 packets, 0 transmit failures
Unnamed (00-00-00-00-00-00):
Totals:
Requests received 2
Requests volunteered 1
Successful loads 1
Failed loads 0
Packets sent 2080
Packets received 2081
Bytes sent 523481
Bytes received 4184
Last load CALPAL at 10-JUN-1998 09:11:17.29
This example shows output from a LIST NODE command issued on
a local node on which there are three nodes defined (GALAXY,
ZAPNOT, and CALPAL). CALPAL has issued two load requests:
o The first request is the multicast request from CALPAL that
the local node volunteered to accept.
o The second request is the load request sent directly to the
local node by CALPAL for the actual load data. The elapsed
time from the second load request to completion of the load
was 6.65 seconds.