68.4 – DBGTBKMSG.EXE
DEBUG, TRACE message file
68.5 – DBL$MSG.EXE
DIBOL message file
68.6 – DCE$RPC_MSG.EXE
RPC/DCE image that provides RPC message handling
68.7 – DDTM$XG_MSG.EXE
DECdtm message file
68.8 – DECC$MSG.EXE
VSI C message file
68.9 – DECW$TRANSPORTMSG.EXE
DECwindows Motif for OpenVMS transport message image
68.10 – EFI$MSG.EXE
This file is included in the latest system build, but a description of the file is not available.
68.11 – ELVMSG.EXE
Nonexecutable message file for the Error Log Viewer (ELV)
68.12 – ENCRYPT$_MSG.EXE
This file is included in the latest system build, but a description of the file is not available.
68.13 – EPC$MSG.EXE
DECtrace message file
68.14 – EPC$MSG.TEMPLATE
This file is included in the latest system build, but a description of the file is not available.
68.15 – FILMNTMSG.EXE
ANALYZE/DISK, ANALYZE/IMAGE, ANALYZE/OBJECT, EDIT/FDL message
file
68.16 – GENCATMSG.EXE
Message file for GENCAT utility
68.17 – ICONVMSG.EXE
Message file for ICONV utility
68.18 – LATMSG.EXE
LAT message file
68.19 – LD$MSG.EXE
LDDRIVER message file
68.20 – LM$MSG.EXE
This file is included in the latest system build, but a description of the file is not available.
68.21 – LMCP$MSG.EXE
Log Manager Control Program (LMCP) message file
68.22 – LMF_MESSAGE.EXE
License Management facility message file
68.23 – LOCALEMSG.EXE
Message file for locale-related utilities
68.24 – NETWRKMSG.EXE
NCP, SET HOST message file
68.25 – PAS$MSG.EXE
Pascal message file
68.26 – PPLMSG.EXE
Parallel processing message file
68.27 – PPPDMSG.EXE
Message file for point-to-point protocol (PPPD) utility
68.28 – PRGDEVMSG.EXE
ANALYZE/CRASH, ANALYZE/SYSTEM, CDU, DIFF, DUMP, LIBRARY, LINK,
MACRO, MESSAGE, PATCH message file
68.29 – RPG$MSG.EXE
RPG message file
68.30 – SCN$MSG.EXE
SCAN message file
68.31 – SHRIMGMSG.EXE
CONVSHR, DCXSHR, EDTSHR, FDLSHR, SMGSHR, SORTSHR, message file
68.32 – SORTMSG.EXE
Sort utility message file
68.33 – SYSMGTMSG.EXE
ACC, AUTHORIZE, BACKUP, EDIT/ACL, INSTALL, MONITOR, SYSMAN
message file
68.34 – SYSMSG.EXE
System message file
68.35 – TDF$MSG.EXE
Image containing messages used by time change components
68.36 – TECOMSG.EXE
TECO editor message file
68.37 – TPUMSG.EXE
TPU message file
68.38 – USB$MSG.EXE
USB error messages
68.39 – VMSINSTAL_LANGUAGE.COM
VMSINSTAL message file
68.40 – VMSLICENSE_LANGUAGE.COM
OpenVMS License Management utility message file
69 – [SYSTEST.ENCRYPTION]
This file is included in the latest system build, but a description of the file is not available.
69.1 – ENCRYPT$IVP.TLB
This file is included in the latest system build, but a description of the file is not available.
69.2 – TEST_BINA.DAT
This file is included in the latest system build, but a description of the file is not available.
69.3 – TEST_TEXT.DAT
This file is included in the latest system build, but a description of the file is not available.
69.4 – V010_FILENC010.DAT
This file is included in the latest system build, but a description of the file is not available.
69.5 – V010_TEST01.DAT
This file is included in the latest system build, but a description of the file is not available.
69.6 – V010_TEST02.DAT
This file is included in the latest system build, but a description of the file is not available.
70 – [SYSTEST.TNT]
SYSTEST subdirectory for OpenVMS Management Station
70.1 – TNT$SERVER_IVP.EXE
OpenVMS Management Station Installation Verification Procedure (IVP)
71 – [SYSTEST]
This directory, known by the logical name SYS$TEST, contains
files used to run the User Environment Test Package (UETP).
71.1 – DECDTM_XA_IVP.EXE
DECdtm XA Installation Verification Proceedure image
71.2 – DECDTM_XG_IVP.EXE
DECdtm XA Gateway Installation Verification Proceedure image
71.3 – DECRAM$IVP.COM
This file is included in the latest system build, but a description of the file is not available.
71.4 – ENCRYPT$IVP.COM
This file is included in the latest system build, but a description of the file is not available.
71.5 – HTHREADS.EXE
This file is included in the latest system build, but a description of the file is not available.
71.6 – RADCHECK.EXE
Checks the distribution of pages used across the Resource
Affinity Domains (RADs) on the system; also monitors and
modifies the Soft RAD Affinity process scheduling algorithm.
To use it, specify RADCHECK as a foreign command (for example,
RADCHECK == "$SYS$SYSROOT:[SYSTEST]RADCHECK). For more
information, enter "$RADCHECK help" at the $ prompt.
71.7 – TCNTRL.CLD
Defines commands to invoke the UETP test controller
71.8 – TNT$IVP.COM
Initiates the OpenVMS Management Station's TNT$SERVER_IVP.EXE
71.9 – UETCDRO00.EXE
Compact disc reader device test
71.10 – UETCLIG00.COM
Command procedure for the cluster integration phase
71.11 – UETCLIG00.DAT
Used by UETP test controller to start cluster integration phase
71.12 – UETCLIG00.EXE
Cluster integration phase
71.13 – UETDISK00.EXE
Disk device test
71.14 – UETDNET00.COM
Command procedure for DECnet for OpenVMS phase
71.15 – UETDNET00.DAT
Used by UETP test controller to start DECnet for OpenVMS phase
71.16 – UETFORT01.DAT
FORTRAN data file used by test
71.17 – UETFORT01.EXE
FORTRAN artificial load test files
71.18 – UETFORT02.EXE
FORTRAN artificial load test files
71.19 – UETFORT03.EXE
FORTRAN artificial load test files
71.20 – UETINIT00.EXE
Checks UETP environment and sets overall parameters
71.21 – UETINIT01.EXE
Checks devices and builds UETINIDEV.DAT
71.22 – UETLOAD00.DAT
Used by UETP test controller to start load test phase
71.23 – UETLOAD02.COM
UETP load phase command procedure used to simulate load on system
71.24 – UETLOAD03.COM
UETP load phase command procedure used to simulate load on system
71.25 – UETLOAD04.COM
UETP load phase command procedure used to simulate load on system
71.26 – UETLOAD05.COM
UETP load phase command procedure used to simulate load on system
71.27 – UETLOAD06.COM
UETP load phase command procedure used to simulate load on system
71.28 – UETLOAD07.COM
UETP load phase command procedure used to simulate load on system
71.29 – UETLOAD08.COM
UETP load phase command procedure used to simulate load on system
71.30 – UETLOAD09.COM
UETP load phase command procedure used to simulate load on system
71.31 – UETLOAD10.COM
UETP load phase command procedure used to simulate load on system
71.32 – UETLOAD11.COM
UETP load phase command procedure used to simulate load on system
71.33 – UETMEMY01.EXE
Artificial load for load test
71.34 – UETNETS00.EXE
Reports nonzero counters as part of DECnet for OpenVMS phase
71.35 – UETP.COM
Main command procedure for UETP
71.36 – UETPHAS00.EXE
Test controller
71.37 – UETSUPDEV.DAT
Supported device data file
71.38 – UETTAPE00.EXE
Magnetic tape device test
71.39 – UETTTYS00.EXE
Terminal and line printer device test
71.40 – UETUNAS00.EXE
DEUNA device test
72 – [SYSUPD]
This directory, known by the logical name SYS$UPDATE, contains
files used to apply system updates.
72.1 – AUTOGEN.COM
Command procedure to calculate parameter values and system file
sizes
72.2 – AXPVMS$PCSI_EX_*.COM
Command procedures used by the POLYCENTER Software Installation
(PCSI) utility during installation/upgrade of OpenVMS
72.3 – CIM_QUALIFIERS25.MOF
This file is included in the latest system build, but a description of the file is not available.
72.4 – CIM_X25.MOF
This file is included in the latest system build, but a description of the file is not available.
72.5 – CREATE_IDX.EXE
Creates VMSKITBLD.IDX and DECW$KITBLD.IDX
72.6 – CREATE_XML.EXE
This file is included in the latest system build, but a description of the file is not available.
72.7 – DECW$KITBLD.DAT
A list of files that provide OpenVMS support for DECwindows
72.8 – DECW$KITBLD.IDX
An indexed version of DECW$KITBLD.DAT
72.9 – DECW$MKFONTDIR.COM
DECwindows command procedure to create font directories
72.10 – DTSS$INSTALL_TIMEZONE_RULE.COM
Command procedure to run SYS$SYSTEM:SYS$READ_TIME_ZONE_RULE.EXE,
which returns the timezone rule in the logical name
SYS$TIMEZONE_RULE and writes a new version of the UTC startup
file, DTSS$UTC_STARTUP.COM or TDF$UTC_STARTUP.COM, in SYS$STARTUP.
72.11 – HP_GICAPPROVIDERREG.MOF
This file is included in the latest system build, but a description of the file is not available.
72.12 – HP_ICAPPROVIDERREG.MOF
This file is included in the latest system build, but a description of the file is not available.
72.13 – HP_ICODPROVIDERREG.MOF
This file is included in the latest system build, but a description of the file is not available.
72.14 – ICAP.CLD
This file is included in the latest system build, but a description of the file is not available.
72.15 – ICAP.MOF
This file is included in the latest system build, but a description of the file is not available.
72.16 – ICAP_CLD.COM
This file is included in the latest system build, but a description of the file is not available.
72.17 – IOGEN$CLEANUP.EXE
A tool used by the operating system installation procedure
72.18 – KRB$REMOVE.COM
Dummy PCSI Kerberos removal command procedure
72.19 – LIBDECOMP.COM
Command procedure to expand libraries shipped in data-reduced
format
72.20 – NETCONFIG_UPDATE.COM
Command procedure to configure an existing DECnet for OpenVMS
network
72.21 – NPAR.MOF
This file is included in the latest system build, but a description of the file is not available.
72.22 – NPARREG.MOF
This file is included in the latest system build, but a description of the file is not available.
72.23 – P350_ADD_DEVICE.COM
Script run at installation time to add P300/P350 device to
system configuration
72.24 – PCSI$CREATE_ACCOUNT.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to implement the Product Description Language ACCOUNT
statement, which is used in Product Description files in product kits
72.25 – PCSI$CREATE_NETWORK_OBJECT.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to implement the Product Description Language NETWORK OBJECT
statement, which is used in Product Definition files in product kits
72.26 – PCSI$CREATE_RIGHTS_IDENTIFIER.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to implement the Product Description Language RIGHTS
IDENTIFIER statement, which is used in Product Definition files
in product kits
72.27 – PCSI$DELETE_ACCOUNT.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to implement the Product Description Language ACCOUNT
statement, which is used in Product Definition files in product kits
72.28 – PCSI$DELETE_NETWORK_OBJECT.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to implement the Product Description Language NETWORK OBJECT
statement, which is used in Product Definition files in product kits
72.29 – PCSI$DELETE_RIGHTS_IDENTIFIER.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to implement the Product Description Language RIGHTS
IDENTIFIER statement, which is used in Product Definition files
in product kits
72.30 – PCSI$EXTRACT_TLB.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to implement part of the PRODUCT EXTRACT PTF command
72.31 – PCSI$REGISTER_PRODUCT.COM
Command procedure used by the POLYCENTER Software Installation (PCSI)
utility to register products that were installed using another method
(such as VMSINSTAL)
72.32 – REGISTER_PRIVILEGED_IMAGE.COM
Command procedure for Image Registry facility
72.33 – SPKITBLD.COM
Command procedure to build software product kits
72.34 – STABACKIT.COM
Builds Standalone Backup on OpenVMS VAX
72.35 – SWAPFILES.COM
Command procedure that creates swapping, paging, and system dump
files of appropriate size for system being installed
72.36 – SYS$NET_SERVICES.COM
Command procedure that examines SYS$STARTUP.COM for network
services, such as SYS$NET_SERVICES_DECNET.COM, that need
to be registered
72.37 – SYS$NET_SERVICES_DECNET.COM
Network service that registers DECnet and DECnet-Plus
72.38 – THREADCP.CLD
Command definition for THREADCP utility
72.39 – VMS$CHKPWD.EXE
File that checks the security of the password for installations and
upgrades
72.40 – VMS$SYSTEM_IMAGES.COM
Command procedure that operates on VMS$SYSTEM_IMAGES.IDX to
generate a new system image data file, VMS$SYSTEM_IMAGES.DATA
72.41 – VMSINSTAL.COM
Command procedure to install EDTCAI and maintenance updates
72.42 – VMSINSTAL_LMFGROUPS.COM
Data file of LMF information used by VMSINSTAL.COM
72.43 – VMSKITBLD.DAT
List of files on the OpenVMS system disk.
72.44 – VMSKITBLD.EFI$COM
This file is included in the latest system build, but a description of the file is not available.
72.45 – VMSKITBLD.IDX
An indexed version of VMSKITBLD.DAT
72.46 – VMSKITBLD.XML
This file is included in the latest system build, but a description of the file is not available.
72.47 – VMSKITBLD.XSD
This file is included in the latest system build, but a description of the file is not available.
72.48 – VMSLICENSE.COM
Command procedure for registering Product Authorization Keys
(PAKs)
72.49 – VMSMPH.LOG
Information that is sent to VSI if the MPH tool is installed
72.50 – VMSMPH.TEMPLATE
A template for creating a new VMSMPH.LOG
72.51 – VSI$CVT_KIT_DEPENDENCY.COM
This file is included in the latest system build, but a description of the file is not available.
72.52 – VSI$PCSI_DATABASE_RESTORE.COM
This file is included in the latest system build, but a description of the file is not available.
72.53 – VSI$PCSI_DATABASE_SAVE.COM
This file is included in the latest system build, but a description of the file is not available.
73 – [TNT.CLIENT]
Directory containing the OpenVMS Management Station PC client software.
Use the files in this directory to build the PC client media.
73.1 – TNT$HELPER.EXE
OpenVMS Management Station server executable that
performs low-level, non-interruptable device operations
73.2 – TNT033.EXE
This file is included in the latest system build, but a description of the file is not available.