1 /CONFIRM
/CONFIRM
/NOCONFIRM
Prompt for positive confirmation before carrying out the
indicated operation. When wild cards are not used, /NOCONFIRM
is the default. When wild cards are used, /CONFIRM is the default
and a prompt is issued for each account to be operated upon.
Moreover, when wild cards are used, /NOCONFIRM causes only a
single prompt to be issued-it does not eliminate the prompt
altogether.
2 /FLAGS
/FLAGS=(flag[,...])
Change the usage flags associated with the account. The
recognized flags are as follows:
DISMAIL User is not allowed to receive new mail messages.
DISUSER User is not allowed to access their account.
LOCKPWD User is not allowed to change their password.
MANAGE User is allowed to manage popstore accounts.
MIGRATED Internal flag used by the PMDF migration
utilities.
PWD_ Password information is stored outside of the
ELSEWHERE popstore.
NODISMAIL User is allowed to receive new mail messages.
NODISUSER User is allowed to access their account.
NOLOCKPWD User is allowed to change their password.
NOMANAGE User is not allowed to manage popstore accounts.
NOMIGRATED Internal flag used by the PMDF migration
utilities.
NOPWD_ Password information is stored within the
ELSEWHERE popstore.
3 /GROUP
/GROUP=name
Name of a management group to constrain the operation to. This
qualifier can be used in conjunction with a username parameter
containing wild card characters so as to further constrain the
modify operation.
4 /GROUP_NAME
/GROUP_NAME=name
Change the accounts to be in the specified management group. A
manager can not change an account's management group to be a
group outside of the manager's group.
5 /LAST_CONNECT
Clear the user's last connect time field.
6 /LAST_DISCONNECT
Clear the user's last disconnect time field.
7 /LOG
/LOG
/NOLOG
When the operation is successful, output a status message stating
that the operation succeeded. Note that error messages are always
indicated. /NOLOG is the default behavior unless wild cards are
used in which case /LOG is the default.
8 /MESSAGE_COUNT
/MESSAGE_COUNT=value
Reduce the user's message count to the specified value, deleting
stored messages if necessary. The act of deleting stored message
will change the past block days field.
9 /OVERDRAFT
/OVERDRAFT=value
/NOOVERDRAFT
Change the account's overdraft quota which is the amount of
message storage by which the account can exceed its primary
message storage quota. By default, this quantity is specified
in units of kbytes; however, the SET STORAGE_UNITS command can be
used to change the units used.
The /NOOVERDRAFT qualifier is equivalent to specifying
/OVERDRAFT=0 and indicates that the account has no overdraft
quota.
The maximum value is 4 gigabytes minus 1. If the value specified
exceeds the maximum, the value is set to zero (no overdraft
quota).
10 /OWNER
/OWNER=owner
Change the accounts ownership field. The length of the string
can not exceed 40 bytes. The owner field is not used by the
popstore itself; it is generally used by humans to associate
account usernames with the actual owner of the account.
11 /PASSWORD
/PASSWORD=password
/NOPASSWORD
Change the account's password. The length of the password can not
exceed 32 bytes. Access by non-managers to the account requires
knowledge of this password. For instance, to access the account
from a POP3 client, the correct username and password associated
with the account must be supplied.
The /NOPASSWORD qualifier specifies that the account does not
require a password to access it.
Note that passwords are case sensitive. Note further that the
command line reader will convert to lower case any string not
enclosed in quotes. As such, a password containing upper case
characters must be enclosed in quotes.
12 /PAST_BLOCK_DAYS
/PAST_BLOCK_DAYS=value
Set the user's past block days field to the specified, integer
value. Changing this value clears the past block days remainder
field.
13 /PRIVATE
/PRIVATE=data
Change the site-specific account data stored in the account
profile file. The data string can not exceed a length of 64
bytes. This data is not used by the popstore itself but can be
used by site-developed procedures which access account profiles.
14 /PROMPT
/PROMPT (default)
/NOPROMPT
By default if a wildcard is used, even if /NOCONFIRM is
specified, one confirmation prompt is issued. If /NOPROMPT is
specified, there is no prompting at all.
15 /PWDEXPIRED
/PWDEXPIRED
/NOPWDEXPIRED
If /PWDEXPIRED is specified, then the account is marked as
pre-expired. This means that if password expiration is enabled
through the PASSWORD_LIFETIME option, then the user must change
their password immediately.
If /NOPWDEXPIRED is specified, then the account is marked as
not pre-expired. The time of last password change is set to the
current time. If password expiration is enabled, then the user
does not have to change the password until the PASSWORD_LIFETIME
has run out.
The default is to not change the pre-expired status of the
account.
16 /QUOTA
/QUOTA=value
/NOQUOTA
Change the account's message storage quota. The account can
continue to receive new messages so long as the storage consumed
by its currently stored messages does not exceed its message
storage quota. See also /OVERDRAFT.
A quota value of zero, as specified with /NOQUOTA or /QUOTA=0,
conveys unlimited storage. That is, to grant an account unlimited
storage set its quota to zero.
A quota value of zero, conveys unlimited storage. That is, to
grant an account unlimited storage set its quota to zero.
By default, this quantity is specified in units of kbytes;
however, the SET STORAGE_UNITS command can be used to change
the units used.
The maximum value is 4 gigabytes minus 1. If the value specified
exceeds the maximum, the value is set to zero (unlimited quota).
17 /RECEIVED_BYTES
/RECEIVED_BYTES=value
Set the cumulative count of received message bytes to the
specified, integer value. By default, this quantity is specified
in units of kbytes; however, the SET STORAGE_UNITS command can be
used to change the units used. The maximum value is 4 gigabytes
minus 1. If the value specified exceeds the maximum, the value is
set to zero.
18 /RECEIVED_MESSAGES
/RECEIVED_MESSAGES=value
Set the cumulative count of received messages to the specified,
integer value.
19 /TOTAL_CONNECT
/TOTAL_CONNECT=value
Set the user's total connect field to the specified, integer
value.
20 /TOTAL_CONNECTIONS
/TOTAL_CONNECTIONS=value
Set the user's count of total connections to the specified,
integer value.