1 – SERVICE
Creates a service for a specified device or partition.
Usage Rules:
o All devices must be mounted systemwide to prevent them from
being dismounted when a process logs out.
o A device that has read/write service must be mounted /FOREIGN
so that it is not visible to OpenVMS.
o A device that has read-only service must be mounted either
/NOWRITE or /FOREIGN to OpenVMS so that no one can change it
locally.
o A partition can be served off a disk mounted for either read-
only or read/write access to OpenVMS.
o Support for partitions is limited in this release.
Privileges Required
LOG_IO
Format
CREATE SERVICE serviceName device-or-partitionName
1.1 – Parameters
serviceName
The name by which the service is known to the local area network.
The service name can consist of alphanumeric characters and
dollar signs ($). It can be 255 characters or fewer in length.
device-or-partitionName
The device or partition name is the name of the OpenVMS disk
device or partition being served to the local area network.
The name of the device or partition must have been created
previously.
Explanations of device and partition names follow.
o Device names
Devices served to the local area network are OpenVMS disk
devices; use OpenVMS device names when you specify an
InfoServer device name.
A disk specification must end with a colon.
o Partition names
Partitions are container files that are served to the network.
As such, they have OpenVMS file names with a default file type
of ".ESS$PARTITION". Partition names, including the device,
directory, and file name, can be no more than 242 characters
in length.
Support for partitions is limited in this version. VSI strongly
suggests that you use LD devices to support partitioned hard
drives. See the DCL command LD HELP for more information.
1.2 – Qualifiers
1.2.1 /CLASS
/CLASS=className
Specifies a subset of the complete LASTport Disk (LAD) name
space.
The purpose of class names is to subdivide name spaces so that
clients see only those names that are meaningful to them. The use
of class names also allows two services to have the same name and
not conflict with one another.
You can, for example, use different class names for different
on-disk structures that several client systems use. You
might use SERVICEA/CLASS=ODS-2 for some client systems and
SERVICEA/CLASS=ISO_9660 for other client systems. The service
has the same name, SERVICEA, but the class names are different.
The class name you use depends upon the client systems that will
connect to the service being created. The default class name
is ODS_2. For example, OpenVMS systems use the ODS_2 name space
when attempting to mount an InfoServer device. Note that OpenVMS
clients can solicit only those services that are in the ODS_2
service class.
Valid class names are the following:
V2.0 Names understood by PCSA MS-DOS Clients
Unformatted Virtual disk has no format
MSDOS MSDOS virtual disks
ODS_2 VMS virtual disks
UNIX UNIX virtual disks
ISO_9660 ISO 9660 CD format
HIGH_SIERRA MS-DOS CD format
APPLE Macintosh HFS format
SUN Sun format
1.2.2 /ENCODED_PASSWORD
/ENCODED_PASSWORD=hexstring
The SAVE command creates this qualifier. Because passwords are
not stored in plain text, the hashed password value is written
out as part of the SAVE operation so that the service can be
recreated without revealing the password.
Note that if you edit the command procedure that the SAVE command
creates and change the service name, the encoded password value
is no longer valid. You need to set another password on the
service using the /PASSWORD qualifer.
1.2.3 /PASSWORD
/PASSWORD=passwordString
/NOPASSWORD (default)
Specifies an optional access control password for the service.
The client system must specify the password to access the
service.
The password string can be up to and including 39 alphanumeric
ASCII characters in length. If no password is specified, the
client system is not required to provide a password to access the
service.
The text password is hashed and stored in encrypted form in
memory with the other service information.
1.2.4 /RATING
/RATING=DYNAMIC
/RATING=STATIC=value
Clients use the service rating to select a service in the case of
multiple matching services. The service with the highest service
rating is selected.
The system adjusts the dynamic service rating based on load. You
can also set a static rating between 0 and 65535. The system does
not adjust static ratings.
One use of static ratings is to migrate clients from one copy
of a service to another. If you set a static rating of 0 on
services you want to migrate clients away from, no new clients
will connect to a 0-rated service; instead, they will connect to
higher-rated services. When all current clients have disconnected
from a service, you can safely delete it.
1.2.5 /READAHEAD
/READAHEAD (Default)
/NOREADAHEAD
When a disk read is required to fill a cache block, /READAHEAD
specifies that the read is to be from the first block requested
to the end of the bucket boundary. Readahead can speed up
sequential operations by pre-loading disk blocks that are needed
into the cache.
If you specify both /READAHEAD and /READBEHIND, any block
requested within a cache bucket causes the entire bucket range
of blocks to be read into the cache.
1.2.6 /READBEHIND
/READBEHIND
/NOREADBEHIND (default)
When a disk read is required to fill a cache block, /READBEHIND
specifies that the read is to include all blocks from the
beginning of the cache bucket boundary up to and including the
requested blocks.
If you specify both /READAHEAD and /READBEHIND, any block
requested within a cache bucket causes the entire bucket range
of blocks to be read into the cache.
1.2.7 /READERS
/READERS=number (default READERS 1000)
/NOREADERS
Specifies the maximum number of simultaneous client connections
allowed for read access. The default is 1000 readers. A value of
0 indicates write-only access.
If a client requests read-only or read/write access to a service,
the system counts this as one reader.
1.2.8 /WRITERS
/WRITERS
/NOWRITERS (default)
Specifies that the service is to allow access to a single writer.
1.3 – Examples
1.$ SHOW DEVICE MOVMAN$DQA0:/full
Disk MOVMAN$DQA0:, device type Compaq CRD-8322B, is online, file-oriented
device, shareable, served to cluster via MSCP Server, error logging is
enabled.
Error count 0 Operations completed
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 0 Default buffer size 512
Total blocks 16515072 Sectors per track 63
Total cylinders 16384 Tracks per cylinder 16
$ MOUNT/SYSTEM dqa0 OVMSIPS11
Volume is write locked
OVMSIPS11 mounted on _MOVMAN$DQA0:
$ InfoServer
InfoServer> CREATE SERVICE VMS_SIPS_V11 _MOVMAN$DQA0:
%INFOSRVR-I-CRESERV, service VMS_SIPS_V11 [ODS-2] created for
_MOVMAN$DQA0:.
This example shows commands you might enter to create a service
for a CD device:
o The SHOW DEVICE . . . /FULL command displays a complete list
of information about the _MOVMAN$DQA0 CD.
o The MOUNT/SYSTEM mounts the OVMSIPS11 volume on the
_MOVMAN$DQA0: CD.
o The InfoServer CREATE SERVICE command creates the VMS_SIPS_
V11 service on the _MOVMAN$DQA0 CD.
2. $LD CREATE KIT1/SIZE-100000
$DIRECTORY KIT1
Directory DKB0:[DISKS]
KIT1.DSK;1 100000/100008 29-APR-2005 14:14:43.49
Total of 1 file, 100000/100008 blocks.
$LD CONNECT KIT1
%LD-I-UNIT, Allocated device is MOVMAN$LDA1:
$INITIALIZE/SYSTEM MOVMAN$LDA1: kit1
$MOUNT/SYSTEM/NOWRITE MOVMAN$LDA1: kit1
%MOUNT-I-MOUNTED, KIT1 mounted on _MOVMAN$LDA1:
$CREATE SERVICE TEST_KIT_1 MOVMAN$LDA1:
%INFOSRVR-I-CRESERV, service TEST_KIT_1 [ODS-2] created for
_MOVMAN$LDA1:
This example shows commands you might enter to create a service
for a logical disk (LD) device:
o The LD CREATE KIT1 command creates a contiguous file, KIT1,
that can be used as a logical disk.
o The DIRECTORY KIT1 command provides information about KIT1.
o The LD CONNECT KIT1 connects the logical disk file, KIT1, to
the logical disk device MOVMAN$LDA1:.
o The INITIALIZE command formats the MOVMAN$LDA1: LD device.
o The MOUNT command makes the LD device available for
processing.
o The CREATE SERVICE command creates the TEST_KIT_1 service on
the _MOVMAN$LDA1 LD device.