!*** MODULE $SYIDEF ***
!DEC$ OPTIONS/ALIGN=(RECORDS=PACKED,COMMONS=PACKED)/NOWARN
 ! +
 !  Get System Information Data Identifier Definitions
 ! 
 !  **** NOTE ****
 ! 
 !         New items must always be added to the END of each item list
 !         (preceding the ENDlistname item) so that users will not have
 !         to relink.
 ! -
 !  DEFINE TABLE TYPES 
	PARAMETER SYI$C_EXETYPE = '00000001'X	 !  Executive cells
	PARAMETER SYI$C_FLDTYPE = '00000002'X	 !  Sub-field data
	PARAMETER SYI$C_RSDTYPE = '00000003'X	 !  Reduced system data
 ! 	The following item-codes are for executive data cells.
 ! 	Processor registers are a special case of this type.
 ! 	Some EXE-type cells have frequently used sub-fields,
 ! 	which have item-codes in the FLD section. (after this one)
	PARAMETER SYI$_VERSION = '00001000'X	 !  VMS version number
	PARAMETER SYI$_SID = '00001001'X	 !  System ID register
	PARAMETER SYI$_PFCDEFAULT = '00001002'X	 !  Default page fault cluster size
	PARAMETER SYI$_PAGTBLPFC = '00001003'X	 !  Default page table page fault cluster
	PARAMETER SYI$_SYSPFC = '00001004'X	 !  Page fault cluster for system paging
	PARAMETER SYI$_KFILSTCNT = '00001005'X	 !  (Obsolete, to be deleted in a future release)
	PARAMETER SYI$_GBLSECTIONS = '00001006'X  !  Global section count
	PARAMETER SYI$_GBLPAGES = '00001007'X	 !  Global page count
	PARAMETER SYI$_GBLPAGFIL = '00001008'X	 !  Global page page file page limit
	PARAMETER SYI$_MAXPROCESSCNT = '00001009'X  !  Maximum process count
	PARAMETER SYI$_PIXSCAN = '0000100A'X	 !  Process scan count
	PARAMETER SYI$_PROCSECTCNT = '0000100B'X  !  Process section count
	PARAMETER SYI$_MINWSCNT = '0000100C'X	 !  Minimum working set size
	PARAMETER SYI$_PAGFILCNT = '0000100D'X	 !  Number of paging files
	PARAMETER SYI$_SWPFILCNT = '0000100E'X	 !  Number of swap files
	PARAMETER SYI$_SYSMWCNT = '0000100F'X	 !  System working set count
	PARAMETER SYI$_INTSTKPAGES = '00001010'X  !  Interrupt stack size
	PARAMETER SYI$_DLCKEXTRASTK = '00001011'X  !  Extra int stack for deadlock searches
	PARAMETER SYI$_BALSETCNT = '00001012'X	 !  Balance set count
	PARAMETER SYI$_IRPCOUNT = '00001013'X	 !  Count of I/O packets
	PARAMETER SYI$_IRPCOUNTV = '00001014'X	 !  Limit of extension of IRP list
	PARAMETER SYI$_WSMAX = '00001015'X	 !  Max size of process working set
	PARAMETER SYI$_NPAGEDYN = '00001016'X	 !  Non-paged dynamic pool
	PARAMETER SYI$_NPAGEVIR = '00001017'X	 !  Limit of extension of above
	PARAMETER SYI$_PAGEDYN = '00001018'X	 !  Paged dynamic pool
	PARAMETER SYI$_VIRTUALPAGECNT = '00001019'X  !  Max virtual page count
	PARAMETER SYI$_SPTREQ = '0000101A'X	 !  Requested SPT extension
	PARAMETER SYI$_EXUSRSTK = '0000101B'X	 !  Extra user stack provided
	PARAMETER SYI$_LRPCOUNT = '0000101C'X	 !  Number of large request packets
	PARAMETER SYI$_LRPCOUNTV = '0000101D'X	 !  Limit of extension of LRP list
	PARAMETER SYI$_LRPSIZE = '0000101E'X	 !  Size of large request packet
	PARAMETER SYI$_LRPMIN = '0000101F'X	 !  Min alloc request for LRPs
	PARAMETER SYI$_SRPCOUNT = '00001020'X	 !  Number of small request packets
	PARAMETER SYI$_SRPCOUNTV = '00001021'X	 !  Limit of extension of SRP list
	PARAMETER SYI$_SRPSIZE = '00001022'X	 !  Size of small request packet
	PARAMETER SYI$_SRPMIN = '00001023'X	 !  Min alloc request for SRPs
	PARAMETER SYI$_CHANNELCNT = '00001024'X	 !  Number of permanent I/O channels
	PARAMETER SYI$_PIOPAGES = '00001025'X	 !  Process I/O pages
	PARAMETER SYI$_CTLPAGES = '00001026'X	 !  Control region impure pages
	PARAMETER SYI$_CTLIMGLIM = '00001027'X	 !  Limit on use of proc alloc region
	PARAMETER SYI$_IMGIOCNT = '00001028'X	 !  Default image I/O address space
	PARAMETER SYI$_QUANTUM = '00001029'X	 !  Process quantum
	PARAMETER SYI$_MPW_WRTCLUSTER = '0000102A'X  !  Page write cluster factor
	PARAMETER SYI$_MPW_HILIMIT = '0000102B'X  !  Modified page list high limit
	PARAMETER SYI$_MPW_LOLIMIT = '0000102C'X  !  Modified page list low limit
	PARAMETER SYI$_MPW_PRIO = '0000102D'X	 !  Modified page writer I/O priority
	PARAMETER SYI$_SWP_PRIO = '0000102E'X	 !  Swapper I/O priority
	PARAMETER SYI$_MPW_THRESH = '0000102F'X	 !  Modified page writer lower threshold
	PARAMETER SYI$_MPW_WAITLIMIT = '00001030'X  !  Modified page writer busy wait limit
	PARAMETER SYI$_TBSKIPWSL = '00001031'X	 !  Max number WSlist entries to skip
	PARAMETER SYI$_PHYSICALPAGES = '00001032'X  !  Memory size in pages
	PARAMETER SYI$_PFRATL = '00001033'X	 !  Page fault rate lower threshold
	PARAMETER SYI$_PFRATH = '00001034'X	 !  Page fault rate high threshold
	PARAMETER SYI$_PFRATL_SYS = '00001035'X	 !  PFRATL  for the system working set
	PARAMETER SYI$_WSINC = '00001036'X	 !  Working set increment
	PARAMETER SYI$_WSDEC = '00001037'X	 !  Working set decrement
	PARAMETER SYI$_AWSMIN = '00001038'X	 !  Working set minimum
	PARAMETER SYI$_AWSTIME = '00001039'X	 !  Working set measurement interval
	PARAMETER SYI$_SWPRATE = '0000103A'X	 !  Swap rate control (max)
	PARAMETER SYI$_SWPOUTPGCNT = '0000103B'X  !  Desired proc page cnt for an outswap
	PARAMETER SYI$_SWPALLOCINC = '0000103C'X  !  Swap file allocation increment value
	PARAMETER SYI$_IOTA = '0000103D'X	 !  I/O time allowance
	PARAMETER SYI$_LONGWAIT = '0000103E'X	 !  When HIB or LEF proc becomes longwait
	PARAMETER SYI$_SWPFAIL = '0000103F'X	 !  Swap fail count
	PARAMETER SYI$_VMSD1 = '00001040'X	 !  Reserved to VMS development (DYNAMIC)
	PARAMETER SYI$_VMSD2 = '00001041'X	 !  "
	PARAMETER SYI$_VMSD3 = '00001042'X	 !  "
	PARAMETER SYI$_VMSD4 = '00001043'X	 !  "
	PARAMETER SYI$_VMS5 = '00001044'X	 !  Reserved to VMS development (STATIC)
	PARAMETER SYI$_VMS6 = '00001045'X	 !  "
	PARAMETER SYI$_VMS7 = '00001046'X	 !  "
	PARAMETER SYI$_VMS8 = '00001047'X	 !  "
	PARAMETER SYI$_USERD1 = '00001048'X	 !  Reserved for users (DYNAMIC)
	PARAMETER SYI$_USERD2 = '00001049'X	 !  "
	PARAMETER SYI$_USER3 = '0000104A'X	 !  Reserved for users (STATIC)
	PARAMETER SYI$_USER4 = '0000104B'X	 !  "
	PARAMETER SYI$_EXTRACPU = '0000104C'X	 !  Extra CPU time allowed on expiration
	PARAMETER SYI$_MAXSYSGROUP = '0000104D'X  !  Max group code for system UIC
	PARAMETER SYI$_MVTIMEOUT = '0000104E'X	 !  Timeout for mount verification
	PARAMETER SYI$_MAXBUF = '0000104F'X	 !  Maximum allowable buffered I/O size
	PARAMETER SYI$_DEFMBXBUFQUO = '00001050'X  !  Def buffer quota for mailbox creation
	PARAMETER SYI$_DEFMBXMXMSG = '00001051'X  !  Def max msg size for mailbox creation
	PARAMETER SYI$_DEFMBXNUMMSG = '00001052'X  !  Def number of messages for "
	PARAMETER SYI$_FREELIM = '00001053'X	 !  Desired free list length
	PARAMETER SYI$_FREEGOAL = '00001054'X	 !  Target free list length
	PARAMETER SYI$_GROWLIM = '00001055'X	 !  Free > growlim to grow proc > wsquota
	PARAMETER SYI$_BORROWLIM = '00001056'X	 !  Same as above???
	PARAMETER SYI$_LOCKRETRY = '00001057'X	 !  Multi-CPU lock retry count
	PARAMETER SYI$_XFMAXRATE = '00001058'X	 !  Max DR32 data rate
	PARAMETER SYI$_LAMAPREGS = '00001059'X	 !  Number of UBA map regs for LPA11
	PARAMETER SYI$_REALTIME_SPTS = '0000105A'X  !  SPT entries for CONINTERR processes
	PARAMETER SYI$_CLISYMTBL = '0000105B'X	 !  Number of pages for CLI symbol table
	PARAMETER SYI$_LOCKIDTBL = '0000105C'X	 !  Size of lock ID table
	PARAMETER SYI$_RESHASHTBL = '0000105D'X	 !  Size of resource hash table
	PARAMETER SYI$_DEADLOCK_WAIT = '0000105E'X  !  Deadlock detection timeout period
	PARAMETER SYI$_SCSBUFFCNT = '0000105F'X	 !  SCS buffer descriptor table entries
	PARAMETER SYI$_SCSCONNCNT = '00001060'X	 !  SCS connect descriptor table entries
	PARAMETER SYI$_SCSRESPCNT = '00001061'X	 !  SCS response descriptor table entries
	PARAMETER SYI$_SCSMAXDG = '00001062'X	 !  SCS maximum datagram size
	PARAMETER SYI$_SCSMAXMSG = '00001063'X	 !  SCS max sequenced message size
	PARAMETER SYI$_SCSFLOWCUSH = '00001064'X  !  SCS flow control cushion
	PARAMETER SYI$_SCSSYSTEMID = '00001065'X  !  SCS system ID (48 bits)
	PARAMETER SYI$_SCSSYSTEMIDH = '00001066'X  !  High bits of above
	PARAMETER SYI$_SCSNODE = '00001067'X	 !  SCS system node name
	PARAMETER SYI$_PRCPOLINTERVAL = '00001069'X  !  SCA process polling interval
	PARAMETER SYI$_PASTIMOUT = '0000106A'X	 !  CI port START/STACK timeout
	PARAMETER SYI$_PASTDGBUF = '0000106B'X	 !  CI port DG buffers for START handshake
	PARAMETER SYI$_PANUMPOLL = '0000106C'X	 !  Number of CI ports to poll
	PARAMETER SYI$_PAPOLLINTERVAL = '0000106D'X  !  Time between CI port polls
	PARAMETER SYI$_PAPOOLINTERVAL = '0000106E'X  !  Time between SYSAPs pool check
	PARAMETER SYI$_TIMEPROMPTWAIT = '0000106F'X  !  Time prompt timeout (when booting)
	PARAMETER SYI$_UDABURSTRATE = '00001070'X  !  Max number of longwords per NPR - 1
	PARAMETER SYI$_LNMSHASHTBL = '00001071'X  !  Size of system space log name hash table
	PARAMETER SYI$_LNMPHASHTBL = '00001072'X  !  Size of process space "
	PARAMETER SYI$_TTY_SCANDELTA = '00001073'X  !  Delta time for dialup timer scan
	PARAMETER SYI$_TTY_DIALTYPE = '00001074'X  !  Flags for dialup type
	PARAMETER SYI$_TTY_SPEED = '00001075'X	 !  Terminal default: speed
	PARAMETER SYI$_TTY_RSPEED = '00001076'X	 !  " " receive speed
	PARAMETER SYI$_TTY_PARITY = '00001077'X	 !  " " parity
	PARAMETER SYI$_TTY_BUF = '00001078'X	 !  " " line width
	PARAMETER SYI$_TTY_DEFCHAR = '00001079'X  !  " " characteristics
	PARAMETER SYI$_TTY_DEFCHAR2 = '0000107A'X  !  " " characteristics, 2nd longword
	PARAMETER SYI$_TTY_TYPAHDSZ = '0000107B'X  !  Size of typeahead buffer
	PARAMETER SYI$_TTY_ALTYPAHD = '0000107C'X  !  Alternate typeahead size
	PARAMETER SYI$_TTY_ALTALARM = '0000107D'X  !  Alt typeahead alarm size
	PARAMETER SYI$_TTY_DMASIZE = '0000107E'X  !  Dma size
	PARAMETER SYI$_TTY_PROT = '0000107F'X	 !  Default terminal alloc protection
	PARAMETER SYI$_TTY_OWNER = '00001080'X	 !  Default terminal owner
	PARAMETER SYI$_TTY_CLASSNAME = '00001081'X  !  Default terminal class name prefix
	PARAMETER SYI$_TTY_SILOTIME = '00001082'X  !  Default silo timeout for DMF32
	PARAMETER SYI$_TTY_DEFPORT = '00001083'X  !  DEFAULT PORT ACTION PARAMETER
	PARAMETER SYI$_RMS_DFMBC = '00001084'X	 !  RMS default: multi-block count
	PARAMETER SYI$_RMS_DFMBFSDK = '00001085'X  !  " " multi-buffer count for disk (SEQ)
	PARAMETER SYI$_RMS_DFMBFSMT = '00001086'X  !  " " multi-buffer count for tape
	PARAMETER SYI$_RMS_DFMBFSUR = '00001087'X  !  " " multi-buffer count for unit record
	PARAMETER SYI$_RMS_DFMBFREL = '00001088'X  !  " " multi-buffer count for REL files
	PARAMETER SYI$_RMS_DFMBFIDX = '00001089'X  !  " " multi-buffer count for ISAM files
	PARAMETER SYI$_RMS_CONPOLICY = '0000108A'X  !  " " Default RMS Contention Policy
	PARAMETER SYI$_RMS_PROLOGUE = '0000108B'X  !  " " prolog
	PARAMETER SYI$_RMS_EXTEND_SIZE = '0000108C'X  !  " " file extend quantity
	PARAMETER SYI$_RMS_FILEPROT = '0000108D'X  !  " " file protection
	PARAMETER SYI$_PQL_DASTLM = '0000108E'X	 !  Def AST limit
	PARAMETER SYI$_PQL_MASTLM = '0000108F'X	 !  Min "
	PARAMETER SYI$_PQL_DBIOLM = '00001090'X	 !  Def buffered I/O limit
	PARAMETER SYI$_PQL_MBIOLM = '00001091'X	 !  Min "
	PARAMETER SYI$_PQL_DBYTLM = '00001092'X	 !  Def buffered I/O byte count limit
	PARAMETER SYI$_PQL_MBYTLM = '00001093'X	 !  Min "
	PARAMETER SYI$_PQL_DCPULM = '00001094'X	 !  Def CPU time limit
	PARAMETER SYI$_PQL_MCPULM = '00001095'X	 !  Min "
	PARAMETER SYI$_PQL_DDIOLM = '00001096'X	 !  Def direct I/O limit
	PARAMETER SYI$_PQL_MDIOLM = '00001097'X	 !  Min "
	PARAMETER SYI$_PQL_DFILLM = '00001098'X	 !  Def open file limit
	PARAMETER SYI$_PQL_MFILLM = '00001099'X	 !  Min "
	PARAMETER SYI$_PQL_DPGFLQUOTA = '0000109A'X  !  Def paging file quota
	PARAMETER SYI$_PQL_MPGFLQUOTA = '0000109B'X  !  Min "
	PARAMETER SYI$_PQL_DPRCLM = '0000109C'X	 !  Def sub-process limit
	PARAMETER SYI$_PQL_MPRCLM = '0000109D'X	 !  Min "
	PARAMETER SYI$_PQL_DTQELM = '0000109E'X	 !  Def timer queue entry limit
	PARAMETER SYI$_PQL_MTQELM = '0000109F'X	 !  Min "
	PARAMETER SYI$_PQL_DWSDEFAULT = '000010A0'X  !  Def working set default size
	PARAMETER SYI$_PQL_MWSDEFAULT = '000010A1'X  !  Min "
	PARAMETER SYI$_PQL_DWSQUOTA = '000010A2'X  !  Def working set quota
	PARAMETER SYI$_PQL_MWSQUOTA = '000010A3'X  !  Min "
	PARAMETER SYI$_PQL_DWSEXTENT = '000010A4'X  !  Def working set extent
	PARAMETER SYI$_PQL_MWSEXTENT = '000010A5'X  !  Min "
	PARAMETER SYI$_PQL_DENQLM = '000010A6'X	 !  Def enqueue limit
	PARAMETER SYI$_PQL_MENQLM = '000010A7'X	 !  Min "
	PARAMETER SYI$_ACP_MAPCACHE = '000010A8'X  !  Number of blocks in bitmap cache
	PARAMETER SYI$_ACP_HDRCACHE = '000010A9'X  !  Number of blocks in file header cache
	PARAMETER SYI$_ACP_DIRCACHE = '000010AA'X  !  Number of blocks in directory cache
	PARAMETER SYI$_ACP_WORKSET = '000010AB'X  !  ACP working set
	PARAMETER SYI$_ACP_FIDCACHE = '000010AC'X  !  Number of cached index file slots
	PARAMETER SYI$_ACP_EXTCACHE = '000010AD'X  !  Number of cached disk extents
	PARAMETER SYI$_ACP_EXTLIMIT = '000010AE'X  !  Max fraction of disk to cache
	PARAMETER SYI$_ACP_QUOCACHE = '000010AF'X  !  Number of file quota entries to cache
	PARAMETER SYI$_ACP_SYSACC = '000010B0'X	 !  Default access for system volumes
	PARAMETER SYI$_ACP_MAXREAD = '000010B1'X  !  Max number of direct blks to read
	PARAMETER SYI$_ACP_WINDOW = '000010B2'X	 !  Default window size for system volumes
	PARAMETER SYI$_ACP_WRITEBACK = '000010B3'X  !  Deferred cache writeback enable
	PARAMETER SYI$_ACP_DATACHECK = '000010B4'X  !  ACP datacheck enable flags
	PARAMETER SYI$_ACP_BASEPRIO = '000010B5'X  !  ACP base priority
	PARAMETER SYI$_ACP_SWAPFLGS = '000010B6'X  !  ACP swap flags
	PARAMETER SYI$_DEFPRI = '000010B7'X	 !  Default priority for Job Initiations
	PARAMETER SYI$_IJOBLIM = '000010B8'X	 !  Limit for interactive jobs
	PARAMETER SYI$_BJOBLIM = '000010B9'X	 !  Limit for batch jobs
	PARAMETER SYI$_NJOBLIM = '000010BA'X	 !  Limit for network jobs
	PARAMETER SYI$_RJOBLIM = '000010BB'X	 !  Limit for remote terminal jobs
	PARAMETER SYI$_QUORUM = '000010BC'X	 !  Connection manager cluster QUORUM
	PARAMETER SYI$_VOTES = '000010BD'X	 !  Connection manager VOTES from this system
	PARAMETER SYI$_RECNXINTERVAL = '000010BE'X  !  Connection manager reconnect interval
	PARAMETER SYI$_BOOTTIME = '000010BF'X	 !  64-bit abs. system time at system boot
	PARAMETER SYI$_LOCKIDTBL_MAX = '000010C0'X  !  Maximum size of lock ID table.
	PARAMETER SYI$_TAILORED = '000010C1'X	 !  Is this system tailored?
	PARAMETER SYI$_STARTUP_P1 = '000010C2'X	 !  Parameters for passing information
	PARAMETER SYI$_STARTUP_P2 = '000010C3'X	 !  to system startup procedure.
	PARAMETER SYI$_STARTUP_P3 = '000010C4'X
	PARAMETER SYI$_STARTUP_P4 = '000010C5'X
	PARAMETER SYI$_STARTUP_P5 = '000010C6'X
	PARAMETER SYI$_STARTUP_P6 = '000010C7'X
	PARAMETER SYI$_STARTUP_P7 = '000010C8'X
	PARAMETER SYI$_STARTUP_P8 = '000010C9'X
	PARAMETER SYI$_CLUSTER_NODES = '000010CA'X  !  total number of nodes in cluster
	PARAMETER SYI$_CLUSTER_VOTES = '000010CB'X  !   "     "     "  votes "   "
	PARAMETER SYI$_CLUSTER_QUORUM = '000010CC'X  !   "     quorum in cluster
	PARAMETER SYI$_CLUSTER_FSYSID = '000010CD'X  !  founding systemid
	PARAMETER SYI$_CLUSTER_FTIME = '000010CE'X  !  founding boottime
	PARAMETER SYI$_CLUSTER_MEMBER = '000010CF'X  !  true if in a live cluster
	PARAMETER SYI$_NODE_CSID = '000010D0'X	 !  cluster system id of target node
	PARAMETER SYI$_NODE_VOTES = '000010D1'X	 !  votes of target node
	PARAMETER SYI$_NODE_QUORUM = '000010D2'X  !  quorum of "      "
	PARAMETER SYI$_NODE_SYSTEMID = '000010D3'X  !  systemid of "    "
	PARAMETER SYI$_NODE_SWINCARN = '000010D4'X  !  S/W incarnation of "     "
	PARAMETER SYI$_NODE_SWTYPE = '000010D5'X  !  S/W type of  "     "
	PARAMETER SYI$_NODE_SWVERS = '000010D6'X  !  S/W version of "   "
	PARAMETER SYI$_NODE_HWTYPE = '000010D7'X  !  H/W type of    "   "
	PARAMETER SYI$_NODE_HWVERS = '000010D8'X  !  H/W version of "   "
	PARAMETER SYI$_NODENAME = '000010D9'X	 !  SCS nodename of "    "
	PARAMETER SYI$_ARCHFLAG = '000010DA'X	 !  Flags used by uVAX code
	PARAMETER SYI$_SCS_EXISTS = '000010DB'X	 !  Flag to indicate presence of SCS
	PARAMETER SYI$_DISK_QUORUM = '000010DC'X  !  Cluster quorum device name (in ASCII)
	PARAMETER SYI$_XSID = '000010DD'X	 !  Extended System Identification Register
	PARAMETER SYI$_PAMAXPORT = '000010E0'X	 !  Max PA port to poll
	PARAMETER SYI$_PASANITY = '000010E1'X	 !  PA sanity timer enable/disable switch
	PARAMETER SYI$_DEFQUEPRI = '000010E2'X	 !  Default Que Priority
	PARAMETER SYI$_MAXQUEPRI = '000010E3'X	 !  Max Que Priority
	PARAMETER SYI$_QDSKINTERVAL = '000010E4'X  !  Disk Quorum Interval
	PARAMETER SYI$_ALLOCLASS = '000010E5'X	 !  Allocation class
	PARAMETER SYI$_LGI_RETRY_LIM = '000010E6'X  !  Login retry limit
	PARAMETER SYI$_LGI_RETRY_TMO = '000010E7'X  !  Login retry timeout
	PARAMETER SYI$_LGI_BRK_LIM = '000010E8'X  !  Login failure limit
	PARAMETER SYI$_LGI_BRK_TMO = '000010E9'X  !  Login suspect timeout
	PARAMETER SYI$_LGI_HID_TIM = '000010EA'X  !  Login evasive action time
	PARAMETER SYI$_LGI_PWD_TMO = '000010EB'X  !  System password drop dead time
	PARAMETER SYI$_PQL_DJTQUOTA = '000010EC'X  !  Default Job-wide Logical Name Table Creation Quota
	PARAMETER SYI$_PQL_MJTQUOTA = '000010ED'X  !  Minimum Job-wide Logical Name Table Creation Quota
	PARAMETER SYI$_VAXCLUSTER = '000010EE'X	 !  VAXcluster participation
	PARAMETER SYI$_LOCKDIRWT = '000010EF'X	 !  Lock manager directory system weight
	PARAMETER SYI$_QDSKVOTES = '000010F0'X	 !  Votes held by quorum disk
	PARAMETER SYI$_DORMANTWAIT = '000010F1'X  !  When low pri COM proc becomes dormant
	PARAMETER SYI$_PAGEFILE_PAGE = '000010F2'X  !  Total pagefile pages
	PARAMETER SYI$_SWAPFILE_PAGE = '000010F3'X  !  Total swapfile pages
	PARAMETER SYI$_PAGEFILE_FREE = '000010F4'X  !  Free pagefile pages
	PARAMETER SYI$_SWAPFILE_FREE = '000010F5'X  !  Free swapfile pages
	PARAMETER SYI$_TTY_TIMEOUT = '000010F6'X  !  Seconds for virtual terminal timeout
	PARAMETER SYI$_TTY_AUTOCHAR = '000010F7'X  !  autobaud recognition character
	PARAMETER SYI$_PANOPOLL = '000010F8'X	 !  Disable/enable CI port polling
	PARAMETER SYI$_PE1 = '000010F9'X	 !  Reserved TO PEDRIVER (DYNAMIC)
	PARAMETER SYI$_PE2 = '000010FA'X	 !  "
	PARAMETER SYI$_PE3 = '000010FB'X	 !  "
	PARAMETER SYI$_PE4 = '000010FC'X	 !  "
	PARAMETER SYI$_PE5 = '000010FD'X	 !  Reserved TO PEDRIVER (STATIC)
	PARAMETER SYI$_PE6 = '000010FE'X	 !  "
	PARAMETER SYI$_RMS_GBLBUFQUO = '000010FF'X  !  RMS global buffer quota
	PARAMETER SYI$_RMS_DFNBC = '00001100'X	 !  " " network block count
	PARAMETER SYI$_ACP_DINDXCACHE = '00001101'X  !  File system directory index cache blocks
	PARAMETER SYI$_MAXATTACHPRI = '00001102'X  !  Maximum scheduling prio for ASMP attached processor
	PARAMETER SYI$_SMP_CPUS = '00001103'X	 !  Number of CPUs to boot in SMP system
	PARAMETER SYI$_SMP_CPUSH = '00001104'X	 !  Hi Number of CPUs to boot in SMP system
	PARAMETER SYI$_FALLBACK_MODE = '00001105'X  !  Cluster fallback mode
	PARAMETER SYI$_MPW_LOWAITLIMIT = '00001106'X  !  Modified page writer lower busy wait limit
	PARAMETER SYI$_MPW_IOLIMIT = '00001107'X  !  Modified page writer max concurrent I/O count
	PARAMETER SYI$_S0_PAGING = '00001108'X	 !  System space paging flags
	PARAMETER SYI$_HW_MODEL = '00001109'X	 !  System model number (from SB$B_HWVERS)
	PARAMETER SYI$_HW_NAME = '0000110A'X	 !  System model name from #/name trans. table
	PARAMETER SYI$_SCH_CTLFLAGS = '0000110B'X  !  CPU scheduling control flags (obsolete)
	PARAMETER SYI$_NODE_EVOTES = '0000110C'X  !  Votes expected by target node
	PARAMETER SYI$_CLUSTER_EVOTES = '0000110D'X  !  Number of expected votes in cluster
	PARAMETER SYI$_MULTIPROCESSING = '0000110E'X  !  Multiprocessor participation
	PARAMETER SYI$_FREE_GBLPAGES = '0000110F'X  !  Total, free global pages
	PARAMETER SYI$_CONTIG_GBLPAGES = '00001110'X  !  Maximum, contiguous free global pages
	PARAMETER SYI$_FREE_GBLSECTS = '00001111'X  !  Total, free global sections
	PARAMETER SYI$_EXPECTED_VOTES = '00001112'X  !  Expected votes
	PARAMETER SYI$_PU_OPTIONS = '00001113'X	 !  Select PUDRIVER load options
	PARAMETER SYI$_WPTTE_SIZE = '00001114'X	 !  # Watchpoint Trace Table Entries
	PARAMETER SYI$_WPRE_SIZE = '00001115'X	 !  Watchpoint Restore Entry size 
	PARAMETER SYI$_SMP_SANITY_CNT = '00001116'X  !  # SMP Sanity events bef. timeout
	PARAMETER SYI$_SMP_TICK_CNT = '00001117'X  !  Clock ticks between SMP sanity time cycles
	PARAMETER SYI$_QBUS_MULT_INTR = '00001118'X  !  uVAX/QBUS multi-level interrupt enable flag
	PARAMETER SYI$_SYSTEM_RIGHTS = '00001119'X  !  System rights list segment
	PARAMETER SYI$_SMP_SPINWAIT = '0000111A'X  !  SMP normal busywait timeout
	PARAMETER SYI$_SMP_LNGSPINWAIT = '0000111B'X  !  SMP LONG busywait timeout
	PARAMETER SYI$_TIME_CONTROL = '0000111C'X  !  Time-related control functions
	PARAMETER SYI$_AVAILCPU_CNT = '0000111D'X  !  Number of CPUs in this machine
	PARAMETER SYI$_ACTIVECPU_CNT = '0000111E'X  !  Number of CPUs up and running
	PARAMETER SYI$_MSCP_LOAD = '00001122'X	 !  Load MSCP server at boot time
	PARAMETER SYI$_MSCP_SERVE_ALL = '00001123'X  !  Serve all disks
	PARAMETER SYI$_POOLCHECK = '00001124'X	 !  Pool debugging in MEMORYALC.MAR
	PARAMETER SYI$_TAPE_MVTIMEOUT = '00001125'X  !  Magtape mount verification
	PARAMETER SYI$_PSEUDOLOA = '00001126'X	 !  Pseudoloa image size for tape boot
	PARAMETER SYI$_MINCLASSPRI = '00001127'X  !  Min. priority for class scheduling 
	PARAMETER SYI$_MAXCLASSPRI = '00001128'X  !  Max. priority for class scheduling 
	PARAMETER SYI$_MINPRPRI = '00001129'X	 !  Min. priority for preemptive-resume scheduling 
	PARAMETER SYI$_AUTOCONFIG_ALGO = '0000112A'X  !  Selects which algorithmn SYSGEN uses to autoconfig
	PARAMETER SYI$_ERRORLOGBUFFERS = '0000112B'X  !  Number of buffers for error logging
	PARAMETER SYI$_JOBCTLD = '0000112C'X	 !  Dynamic SYSGEN flag to handle job controller diagnostics a
					!  Dynamic SYSGEN flag to handle job controller diagnostics an
	PARAMETER SYI$_WINDOW_SYSTEM = '0000112D'X  !  Default windowing system for workstation
	PARAMETER SYI$_MSCP_BUFFER = '0000112E'X  !  Pages allocated to server local pool
	PARAMETER SYI$_MSCP_CREDITS = '0000112F'X  !  Number of send credits extended by server
	PARAMETER SYI$_BREAKPOINTS = '00001130'X  !  Mask of INI$BRK callers in exec used in this boot
	PARAMETER SYI$_CLOCK_INTERVAL = '00001131'X  !  Time  (in usec) between interval timer clock interr
	PARAMETER SYI$_DUMPSTYLE = '00001132'X	 !  Mask specifying desired format of dump file (full dump o
					!  Mask specifying desired format of dump file (full dump or s
	PARAMETER SYI$_NISCS_PORT_SERV = '00001133'X  !  Port services flag
	PARAMETER SYI$_RSRVPAGCNT = '00001134'X	 !  No. of pagefile pages to escrow
	PARAMETER SYI$_VECTOR_PROC = '00001135'X  !  Load vector processing
	PARAMETER SYI$_VECTOR_MARGIN = '00001136'X  !  Vector margin
	PARAMETER SYI$_AFFINITY_SKIP = '00001137'X  !  Affinity skip count
	PARAMETER SYI$_AFFINITY_TIME = '00001138'X  !  Affinity queue time
	PARAMETER SYI$_VECTOR_EMULATOR = '00001139'X  !  Vector emulator present flag
	PARAMETER SYI$_VP_MASK = '0000113A'X	 !  Mask of vector processors
	PARAMETER SYI$_VP_NUMBER = '0000113B'X	 !  Number of vector processors
	PARAMETER SYI$_USED_GBLPAGCNT = '0000113C'X  !  Current count of global pages in use
	PARAMETER SYI$_USED_GBLPAGMAX = '0000113D'X  !  Maximum count of global pages in use
	PARAMETER SYI$_USED_GBLSECTCNT = '0000113E'X  !  Current count of global sections in use
	PARAMETER SYI$_USED_GBLSECTMAX = '0000113F'X  !  Maximum count of global sections in use
	PARAMETER SYI$_ERLBUFFERPAGES = '00001140'X  !  Pages in each ERL Buffer
	PARAMETER SYI$_TAPE_ALLOCLASS = '00001141'X  !  Tape Allocation class
	PARAMETER SYI$_PFRATH_SYS = '00001142'X	 !  PFRATH  for the system working set
	PARAMETER SYI$_WSINC_SYS = '00001143'X	 !  WSINC   for the system working set
	PARAMETER SYI$_WSDEC_SYS = '00001144'X	 !  WSDEC   for the system working set
	PARAMETER SYI$_AWSMIN_SYS = '00001145'X	 !  AWSMIN  for the system working set
	PARAMETER SYI$_AWSTIME_SYS = '00001146'X  !  AWSTIME for the system working set
	PARAMETER SYI$_BOOT_STYLE = '00001147'X	 !  Boot Style
	PARAMETER SYI$_FT_FLAGS = '00001148'X	 !  Fault Tolerance Flags field
	PARAMETER SYI$_SHADOWING = '00001149'X	 !  Shadowing mode
	PARAMETER SYI$_SHADOW_SYS_DISK = '0000114A'X  !  Volume shadowed system disk
	PARAMETER SYI$_SHADOW_SYS_UNIT = '0000114B'X  !  Shadowed system disk unit number
	PARAMETER SYI$_SHADOW_MAX_COPY = '0000114C'X  !  Max shadow copy threads allowed
	PARAMETER SYI$_TIMVCFAIL = '0000114D'X	 !  Time to detect VC failure
	PARAMETER SYI$_PRIORITY_OFFSET = '0000114F'X  !  Priority gap for preemption
	PARAMETER SYI$_VCC_FLAGS = '00001150'X	 !  VBN static cache flags
	PARAMETER SYI$_VCC_MAXSIZE = '00001155'X  !  Max size of VBN cache
	PARAMETER SYI$_MMG_CTLFLAGS = '00001159'X  !  Bit mask to control A/T mem mgmt.
	PARAMETER SYI$_NISCS_MAX_PKTSZ = '0000115B'X  !  Maximum number of bytes allocated for all NISCS pa
	PARAMETER SYI$_NISCS_LAN_OVRHD = '0000115C'X  !  Bytes in NISCS packets reserved for other uses (eg
	PARAMETER SYI$_DECNET_VERSION = '0000115D'X  !  Version of DECnet installed
	PARAMETER SYI$_TMSCP_LOAD = '0000115E'X	 !  Load TMSCP tape server at boot time
	PARAMETER SYI$_LGI_CALLOUTS = '0000115F'X  !  Number of LOGINOUT local policy callouts
	PARAMETER SYI$_NET_CALLOUTS = '00001160'X  !  Number of DECNET Login local policy callouts
	PARAMETER SYI$_IEEE_ADDRESS = '00001161'X  !  48 bit IEEE unique address - low order 32 bits
	PARAMETER SYI$_IEEE_ADDRESSH = '00001162'X  !  48 bit IEEE unique address - high order 16 bits
	PARAMETER SYI$_SHADOW_MBR_TMO = '00001163'X  !  Timeout interval for HBS shadow members
	PARAMETER SYI$_PAGE_SIZE = '00001164'X	 !  Memory page size in bytes
	PARAMETER SYI$_ARCH_TYPE = '00001165'X	 !  Architecture type
	PARAMETER SYI$_ARCH_NAME = '00001166'X	 !  Architecture name
	PARAMETER SYI$_CRD_CONTROL = '00001167'X  !  CRD scrub/replace control
	PARAMETER SYI$_SECURITY_POLICY = '00001168'X  !  C2/B1 security policy bitmask
	PARAMETER SYI$_DNVOSI1 = '00001169'X	 !  DECnet/OSI for VMS
	PARAMETER SYI$_MEMSIZE = '0000116B'X	 !  System memory size in pages
	PARAMETER SYI$_KSTACKPAGES = '0000116C'X  !  Pages in Kernel Stack
	PARAMETER SYI$_PHYSICAL_MEMORY = '0000116D'X  !  Max of physical memory to use
	PARAMETER SYI$_XQP_ALLOC_BLKS = '0000116E'X  !  Flag - can XQP allocate blocks
	PARAMETER SYI$_ZERO_LIST_HI = '0000116F'X  !  Zeroed list high limit
	PARAMETER SYI$_CPUTYPE = '00001170'X	 !  CPU type of Primary CPU from HWRPB
	PARAMETER SYI$_SYSTYPE = '00001171'X	 !  System type from HWRPB
	PARAMETER SYI$_ITB_ENTRIES = '00001172'X  !  Number of code huge page TBs to use
	PARAMETER SYI$_GH_RSRVPGCNT = '00001173'X  !  pages reserved in code huge page 
	PARAMETER SYI$_DEF_PRIO_MIN = '00001174'X  !  MIN priority for default policy
	PARAMETER SYI$_DEF_PRIO_MAX = '00001175'X  !  MAX priority for default policy
	PARAMETER SYI$_PSXFIFO_PRIO_MIN = '00001176'X  !  MIN priority for POSIX FIFO policy
	PARAMETER SYI$_PSXFIFO_PRIO_MAX = '00001177'X  !  MAX priority for POSIX FIFO policy
	PARAMETER SYI$_PSXRR_PRIO_MIN = '00001178'X  !  MIN priority for POSIX Rnd-Robbin policy
	PARAMETER SYI$_PSXRR_PRIO_MAX = '00001179'X  !  MAX priority for POSIX Rnd-Robbin policy
	PARAMETER SYI$_XQPCTLD1 = '0000117A'X	 !  Reserved for XQP use (dynamic)
	PARAMETER SYI$_XQPCTL2 = '0000117B'X	 !  Reserved for XQP use
	PARAMETER SYI$_CPUCONF = '0000117D'X	 !  CPU Configuration bitmask: 0 through 31
	PARAMETER SYI$_DECNET_FULLNAME = '0000117E'X  !  DECnet/OSI fullname (or DECnet Phase IV node name)
	PARAMETER SYI$_XQPCTLD3 = '0000117F'X	 !  F11BXQP Specific parameters
	PARAMETER SYI$_XQPCTL4 = '00001180'X	 ! 	|
	PARAMETER SYI$_XQPCTLD5 = '00001181'X	 ! 	|
	PARAMETER SYI$_XQPCTL6 = '00001182'X	 ! 	|
	PARAMETER SYI$_XQPCTLD7 = '00001183'X	 ! 	|
	PARAMETER SYI$_XQPCTL8 = '00001184'X	 ! 	v
	PARAMETER SYI$_DBGTK_SCRATCH = '00001185'X  !  HLL System debugger scratch memory request
	PARAMETER SYI$_PALCODE_VERSION = '00001186'X  !  Version of PALcode
	PARAMETER SYI$_CONSOLE_VERSION = '00001187'X  !  Version of Console firmware
	PARAMETER SYI$_GH_EXEC_CODE = '00001188'X  !  Pages in the execlet code region
	PARAMETER SYI$_GH_EXEC_DATA = '00001189'X  !  Pages in the execlet data region
	PARAMETER SYI$_GH_RES_CODE = '0000118A'X  !  Pages in the resident image code region
	PARAMETER SYI$_GH_RES_DATA = '0000118B'X  !  Pages in the resident image data region
	PARAMETER SYI$_IMGREG_PAGES = '0000118C'X  !  Pages in the P1 image-region
	PARAMETER SYI$_SHADOW_SYS_TMO = '0000118D'X  !  Timeout interval for HBS system disk- new and after
					!  Timeout interval for HBS system disk- new and after  - shad
	PARAMETER SYI$_SHADOW_SYS_WAIT = '0000118E'X  !  Timeout interval for HBS system disk- exists - sha
					!  Timeout interval for HBS system disk- exists - shadow membe
	PARAMETER SYI$_SHADOW_ENABLE = '0000118F'X  !  Member removed at reboot from HBVS set.
	PARAMETER SYI$_SHADOW_SITE_O = '00001190'X  !  OBSOLETE default site for shadow set (text)
	PARAMETER SYI$_SYSTEM_CHECK = '00001191'X  !  load/enable system problem isolation code
	PARAMETER SYI$_PFN_COLOR_COUNT = '00001192'X  !  PFN Color Count
	PARAMETER SYI$_REAL_CPUTYPE = '00001193'X  !  Actual CPU type of Primary CPU from
	PARAMETER SYI$_SCSICLUSTER_P1 = '00001194'X  !  Reserved for SCSI Cluster
	PARAMETER SYI$_SCSICLUSTER_P2 = '00001195'X  !  Reserved for SCSI Cluster
	PARAMETER SYI$_SCSICLUSTER_P3 = '00001196'X  !  Reserved for SCSI Cluster
	PARAMETER SYI$_SCSICLUSTER_P4 = '00001197'X  !  Reserved for SCSI Cluster
	PARAMETER SYI$_FILE_CACHE = '00001198'X	 !  Percentage of physical memory reserved for Dollar file 
					!  Percentage of physical memory reserved for Dollar file syst
	PARAMETER SYI$_TMSCP_SERVE_ALL = '00001199'X  !  Serve all tapes
	PARAMETER SYI$_DR_UNIT_BASE = '0000119A'X  !  unit base for DR devices
	PARAMETER SYI$_MC_SERVICES_P0 = '0000119B'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P1 = '0000119C'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P2 = '0000119D'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P3 = '0000119E'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P4 = '0000119F'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P5 = '000011A0'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P6 = '000011A1'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P7 = '000011A2'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P8 = '000011A3'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_MC_SERVICES_P9 = '000011A4'X  !  Reserved for MEmory Channel Services
	PARAMETER SYI$_S2_SIZE = '000011A5'X	 !  Size in Mbytes for S2 space
	PARAMETER SYI$_PROCESS_SPACE_LIMIT = '000011A6'X  !  Highest process private VA
	PARAMETER SYI$_PT_BASE = '000011A7'X	 !  Base VA of PT_space
	PARAMETER SYI$_SHARED_VA_PTES = '000011A8'X  !  Boundary between process and system space PTEs
	PARAMETER SYI$_MULTITHREAD = '000011A9'X  !  per process kernel thread limit
	PARAMETER SYI$_CWCREPRC_ENABLE = '000011AA'X  !  Allow remote process creation by unprivileged user
	PARAMETER SYI$_MAXBOBMEM = '000011AB'X	 !  Maximum physical memory for buffer objects (pagelets)
	PARAMETER SYI$_FAST_PATH = '000011AC'X	 !  Fast Path enable/disable
	PARAMETER SYI$_IO_PREFER_CPUS = '000011AD'X  !  Bit mask of CPUs available to be Fast Path preferre
	PARAMETER SYI$_ACTIVE_CPU_MASK = '000011AE'X  !  Currently active CPU mask
	PARAMETER SYI$_AVAIL_CPU_MASK = '000011AF'X  !  Mask of existing system CPUs
	PARAMETER SYI$_PRIMARY_CPUID = '000011B0'X  !  CPUID of the primary processor
	PARAMETER SYI$_MAX_CPUS = '000011B1'X	 !  Maximum allowed CPUs in system
	PARAMETER SYI$_CPUCAP_MASK = '000011B2'X  !  Array of CPU capability masks
	PARAMETER SYI$_FILE_CACHE_MIN = '000011B3'X  !  Min # of pages of cache reserved for Spiralog file 
	PARAMETER SYI$_FILE_CACHE_MAX = '000011B4'X  !  Max # of pages of cache reserved for Spiralog file 
	PARAMETER SYI$_F64CTL1 = '000011B5'X	 !  Reserved to Spiralog file system
	PARAMETER SYI$_F64CTL2 = '000011B6'X	 !    |
	PARAMETER SYI$_F64CTLD3 = '000011B7'X	 !    |
	PARAMETER SYI$_F64CTLD4 = '000011B8'X	 !    V
	PARAMETER SYI$_DISABLE_UPCALLS = '000011B9'X  !  Bitmask to disable specific threads upcalls
	PARAMETER SYI$_DEVICE_NAMING = '000011BA'X  !  DEVICE_NAMING bitmask
	PARAMETER SYI$_AVAIL_PAGES = '000011BB'X  !  Available physical pages
	PARAMETER SYI$_PROC_SLOTS = '000011BC'X	 !  Process slot information
	PARAMETER SYI$_BAL_SLOTS = '000011BD'X	 !  Balance slot information
	PARAMETER SYI$_NPAGED_POOL = '000011BE'X  !  Nonpaged pool information
	PARAMETER SYI$_PAGED_POOL = '000011BF'X	 !  Paged pool information
	PARAMETER SYI$_MAIN_MEMORY = '000011C0'X  !  Memory information
	PARAMETER SYI$_ARB_SUPPORT = '000011C1'X  !  Level of security backward compatibility
 ! ifsymbol PFNBITS_32;
	PARAMETER SYI$_MAX_PFN = '000011C2'X	 !  Returns contents of MMG$GL_MAXPFN
	PARAMETER SYI$_PFN_MEMORY_MAP = '000011C3'X  !  Returns a physical memory map
 ! end_ifsymbol;
	PARAMETER SYI$_PMD_COUNT = '000011C4'X	 !  Returns count of phys. mem. desc. in HWRPB
	PARAMETER SYI$_MSCP_CMD_TMO = '000011C5'X  !  VMS-MSCP server timer value
	PARAMETER SYI$_LAN_FLAGS = '000011C6'X	 !  LAN specific flags
	PARAMETER SYI$_RMS_DFLRL = '000011C7'X	 !  RMS default max record length
	PARAMETER SYI$_RMS_HEURISTIC = '000011C8'X  !  RMS file attribute heuristic ctr flag
	PARAMETER SYI$_NPAG_INTERVAL = '000011C9'X  !  nonpaged pool gentle reclamation interval (# of seco
	PARAMETER SYI$_NPAG_GENTLE = '000011CA'X  !  gentle reclamation refill percentage
	PARAMETER SYI$_NPAG_AGGRESSIVE = '000011CB'X  !  aggressive reclamation refill percentage
	PARAMETER SYI$_NPAG_BAP_MIN = '000011CC'X  !  Min Size of Bus Addressable Pool
	PARAMETER SYI$_NPAG_BAP_MAX = '000011CD'X  !  Max Size of Bus Addressable Pool
	PARAMETER SYI$_NPAG_BAP_MAX_PA = '000011CE'X  !  max. PA for BAP
	PARAMETER SYI$_NPAG_RING_SIZE = '000011CF'X  !  size of ring buffer
	PARAMETER SYI$_CLUSTER_CREDITS = '000011D0'X  !  cluster send credits
	PARAMETER SYI$_PTES_PER_PAGE = '000011D1'X  !  
	PARAMETER SYI$_TEMPERATURE_VECTOR = '000011D2'X  !  16-byte temperature vector
	PARAMETER SYI$_POWER_VECTOR = '000011D3'X  !  16-byte power vector
	PARAMETER SYI$_FAN_VECTOR = '000011D4'X	 !  16-byte fan vector
	PARAMETER SYI$_THERMAL_VECTOR = '000011D5'X  !  16-byte thermal vector
	PARAMETER SYI$_MAXBOBS0S1 = '000011D6'X	 !  Maximum buffer object S0S1 VA space (pagelets)
	PARAMETER SYI$_MAXBOBS2 = '000011D7'X	 !  Maximum buffer object S2 VA space (pagelets)
	PARAMETER SYI$_VCC_MAX_CACHE = '000011D8'X  !  Maximum VDC Cache Size
	PARAMETER SYI$_VCC_MAX_IO_SIZE = '000011D9'X  !  Maximum Cached VDC I/O Size
	PARAMETER SYI$_VCC_MAX_LOCKS = '000011DA'X  !  Maximum number of locks for VDC
	PARAMETER SYI$_VCC_READAHEAD = '000011DB'X  !  VDC Readahead caching on/off
	PARAMETER SYI$_VCC_WRITEBEHIND = '000011DC'X  !  VDC Writebehind caching on/off
	PARAMETER SYI$_VCC_WRITE_DELAY = '000011DD'X  !  VDC Writebehind write delay
	PARAMETER SYI$_SD_ALLOCLASS = '000011DE'X  !  Snapshot-capable disk device allocation class
	PARAMETER SYI$_GALAXY = '000011DF'X	 !  Node should participate in a Galaxy
	PARAMETER SYI$_NPAG_BAP_MIN_PA = '000011E0'X  !  min. PA for BAP
	PARAMETER SYI$_BAP_MIN_REQ_SZ = '000011E1'X  !  Bus addressable pool (BAP) minimum size requested (
	PARAMETER SYI$_BAP_MAX_REQ_SZ = '000011E2'X  !  Bus addressable pool (BAP) maximum size requested (
	PARAMETER SYI$_BAP_MIN_PA_REG = '000011E3'X  !  Bus addressable pool (BAP) minimum PA registered (m
					!  Bus addressable pool (BAP) minimum PA registered (megabytes
	PARAMETER SYI$_BAP_MAX_PA_REG = '000011E4'X  !  Bus addressable pool (BAP) maximum PA registered (m
					!  Bus addressable pool (BAP) maximum PA registered (megabytes
	PARAMETER SYI$_GALAXY_ID = '000011E5'X	 !  16-byte unique ID of Galaxy platform
	PARAMETER SYI$_RMSD6 = '000011E6'X	 !  Reserved to RMS development (dynamic)
	PARAMETER SYI$_MPDEV_ENABLE_O = '000011E7'X  !  OBSOLETE Multipath I/O switching control parameter
	PARAMETER SYI$_MPDEV_REMOTE_O = '000011E8'X  !  OBSOLETE Multipath I/O switching control parameter 
					!  OBSOLETE Multipath I/O switching control parameter for remo
	PARAMETER SYI$_RMSD1 = '000011E9'X	 !  Reserved to RMS development (dynamic) 
	PARAMETER SYI$_GALAXY_MEMBER = '000011EA'X  !  Flag - Are we a Galaxy member?
	PARAMETER SYI$_GALAXY_PLATFORM = '000011EB'X  !  Flag - Are we on a Galaxy platform?
	PARAMETER SYI$_PARTITION_ID = '000011EC'X  !  Galaxy Partition ID
	PARAMETER SYI$_COMMUNITY_ID = '000011ED'X  !  Galaxy Community ID
	PARAMETER SYI$_GLX_INST_TMO = '000011EE'X  !  Galaxy heartbeat timeout value
	PARAMETER SYI$_SMCI_FLAGS = '000011EF'X	 !  SMCI Flags
	PARAMETER SYI$_SMCI_PORTS = '000011F0'X	 !  SMCI Port bitmask
	PARAMETER SYI$_SERVED_IO = '000011F1'X	 !  QIOserver control parameter
	PARAMETER SYI$_GLX_SW_VERSION = '000011F2'X  !  Galaxy software version
	PARAMETER SYI$_GLX_MAX_MEMBERS = '000011F3'X  !  maximum node_id this platform
	PARAMETER SYI$_GLX_INCARNATION = '000011F4'X  !  galaxy incarnation count
	PARAMETER SYI$_GLX_FORMATION = '000011F5'X  !  galaxy creation time (systime)
	PARAMETER SYI$_GLX_TERMINATION = '000011F6'X  !  systime galaxy died
	PARAMETER SYI$_GLX_MBR_NAME = '000011F7'X  !  galaxy member name
	PARAMETER SYI$_GLX_MBR_MEMBER = '000011F8'X  !  galaxy member 
	PARAMETER SYI$_GLX_MBR_INCARNATION = '000011F9'X  !  galaxy member incarnation number
	PARAMETER SYI$_GLX_MBR_JOINED = '000011FA'X  !  galaxy member join time
	PARAMETER SYI$_MPDEV_LCRETRIES = '000011FB'X  !  Multipath Switching - local connect retries
	PARAMETER SYI$_MPDEV_D1 = '000011FC'X	 !  Multipath Switching - dynamic 
	PARAMETER SYI$_CLUSTER_NTIME = '000011FD'X  !  Cluster New time
	PARAMETER SYI$_CLUSTER_NTIME_REF = '000011FE'X  !  Cluster New time - local reference
	PARAMETER SYI$_MPDEV_POLLER_O = '000011FF'X  !  OBSOLETE Multipath poller parameter 
	PARAMETER SYI$_CPU_FAILOVER = '00001200'X  !  Array of CPU failover partitions
	PARAMETER SYI$_POTENTIAL_CPU_MASK = '00001201'X  !  Mask of CPUs that are compatible on this instance
	PARAMETER SYI$_POTENTIALCPU_CNT = '00001202'X  !  Number of CPUs that could potentially run on this
	PARAMETER SYI$_CPU_AUTOSTART = '00001203'X  !  Array of CPU autostart states
	PARAMETER SYI$_FAST_PATH_PORTS = '00001206'X  !  New Fastpath implementations
	PARAMETER SYI$_GLX_SHM_REG = '00001207'X  !  Number of Galaxy shared memory regions in GMDB
	PARAMETER SYI$_RAD_SUPPORT = '00001208'X  !  Switch to turn RAD (aka NUMA) support on
	PARAMETER SYI$_NPAGECALC = '00001209'X	 !  Tell VMS to calculate default npagedyn and vir values
	PARAMETER SYI$_WBM_MSG_INT = '0000120A'X  !  write bitmap msg check interval
	PARAMETER SYI$_WBM_MSG_UPPER = '0000120B'X  !  upper threshold for msgs
	PARAMETER SYI$_WBM_MSG_LOWER = '0000120C'X  !  lower threshold for msgs
	PARAMETER SYI$_HP_ACTIVE_CPU_CNT = '0000120D'X  !  number of active CPUs in this hard partition
	PARAMETER SYI$_HP_ACTIVE_SP_CNT = '0000120E'X  !  number of active soft partitions in this hard par
	PARAMETER SYI$_HP_CONFIG_SP_CNT = '0000120F'X  !  number of configured soft partitions in this hard
	PARAMETER SYI$_HP_CONFIG_SBB_CNT = '00001210'X  !  number of configured SBBs in this hard partition
	PARAMETER SYI$_SHADOW_MAX_UNIT = '00001211'X  !  maximum number of dsa devices which can exist on t
	PARAMETER SYI$_WBM_OPCOM_LVL = '00001212'X  !  opcom mode for write bitmap information messages 
	PARAMETER SYI$_AUTO_DLIGHT_SAV = '00001213'X  !  automatic daylight saving SYSGEN flag
	PARAMETER SYI$_RAD_MAX_RADS = '00001214'X  !  maximum number of RADs on this platform
	PARAMETER SYI$_RAD_CPUS = '00001215'X	 !  potential CPUs per RAD for this instance
	PARAMETER SYI$_RAD_MEMSIZE = '00001216'X  !  private memory per RAD for this instance
	PARAMETER SYI$_RAD_SHMEMSIZE = '00001217'X  !  number of shared memory per RAD
	PARAMETER SYI$_GALAXY_SHMEMSIZE = '00001218'X  !  number of shared memory pages total
	PARAMETER SYI$_NPAGERAD = '00001219'X	 !  How much of NPAGEDYN is in other than the base RAD
	PARAMETER SYI$_SERIAL_NUMBER = '0000121A'X  !  System Serial Number
	PARAMETER SYI$_MPDEV_D2 = '0000121C'X	 !  Multipath Switching - dynamic  
	PARAMETER SYI$_MPDEV_D3 = '0000121D'X	 !  Multipath Switching - dynamic
	PARAMETER SYI$_MPDEV_D4 = '0000121E'X	 !  Multipath Switching - dynamic
	PARAMETER SYI$_MPDEV_AFB_INTVL = '0000121F'X  !  Multipath Auto fail back Interval - dynamic
	PARAMETER SYI$_MPW_STACKPAGES = '00001220'X  !  MPW Stack Pages
	PARAMETER SYI$_PRESENT_CPU_MASK = '00001221'X  !  Mask of CPUs that are present in the hard partition
	PARAMETER SYI$_PRESENTCPU_CNT = '00001222'X  !  Number of CPUs that are present in the hard partition
	PARAMETER SYI$_POWERED_CPU_MASK = '00001223'X  !  Mask of CPUs that are powered up in the hard part
	PARAMETER SYI$_POWEREDCPU_CNT = '00001224'X  !  Number of CPUs that are powered up in the hard part
	PARAMETER SYI$_RMSD7 = '00001225'X	 !  RMS readahead hint feature for XFC
	PARAMETER SYI$_RMS_SEQFILE_WBH = '00001226'X  !  RMS default writebehind feature
	PARAMETER SYI$_DCL_CTLFLAGS = '00001227'X  !  DCL Control Flags
	PARAMETER SYI$_DELPRC_EXIT = '00001228'X  !  System-wide EXIT behavior for direct calls to $DELPRC
	PARAMETER SYI$_PHYMEM_CONFIG = '00001229'X  !  Dynamic memory configuration control
	PARAMETER SYI$_KTK_D1 = '0000122A'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D2 = '0000122B'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D3 = '0000122C'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D4 = '0000122D'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D5 = '0000122E'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D6 = '0000122F'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D7 = '00001230'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D8 = '00001231'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D9 = '00001232'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D10 = '00001233'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D11 = '00001234'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_KTK_D12 = '00001235'X	 !  Dynamic kernel tuning knob
	PARAMETER SYI$_MIN_CPU_FEATURE_MASK = '00001236'X  !  AMASK value of all CPUs ANDed together
	PARAMETER SYI$_FIBRE_SCSI_RSV1 = '00001237'X  !  reserved for Fibre SCSI use
	PARAMETER SYI$_DEFUID = '00001238'X	 !  default POSIX UID
	PARAMETER SYI$_DEFGID = '00001239'X	 !  default POSIX GID
	PARAMETER SYI$_MVSUPMSG_INTVL = '0000123A'X  !  Quiet mountver suppression interval -dynamic
	PARAMETER SYI$_MVSUPMSG_NUM = '0000123B'X  !  Quiet mountver suppression number  -dynamic
	PARAMETER SYI$_SHADOW_SITE_ID = '0000123C'X  !  Shadow Site value
	PARAMETER SYI$_RMSD2 = '0000123D'X	 !  Reserved to RMS development (dynamic) 
	PARAMETER SYI$_RMSD3 = '0000123E'X	 !  Reserved to RMS development (dynamic) 
	PARAMETER SYI$_RMSD4 = '0000123F'X	 !  Reserved to RMS development (dynamic) 
	PARAMETER SYI$_RMSD5 = '00001240'X	 !  Reserved to RMS development (dynamic) 
	PARAMETER SYI$_TESTING123 = '00001241'X	 !  Reserved for debugging
	PARAMETER SYI$_VCC_PAGESIZE = '00001242'X  !  Reserved for XFC use
	PARAMETER SYI$_VCC_RSVD = '00001243'X	 !  Reserved for XFC use
	PARAMETER SYI$_RSVD_IO_1 = '00001244'X	 !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_IO_2 = '00001245'X	 !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_CLU_1 = '00001246'X	 !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_CLU_2 = '00001247'X	 !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_EXEC_1 = '00001248'X  !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_EXEC_2 = '00001249'X  !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_SECUR_1 = '0000124A'X  !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_SECUR_2 = '0000124B'X  !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_LAN_1 = '0000124C'X	 !  Reserved for debug/future enhancement
	PARAMETER SYI$_RSVD_LAN_2 = '0000124D'X	 !  Reserved for debug/future enhancement
	PARAMETER SYI$_SHADOW_REC_DLY = '0000124E'X  !  Time to wait after crash before merge start
	PARAMETER SYI$_SHADOW_D1 = '0000124F'X	 !  Shadowing spare
	PARAMETER SYI$_SHADOW_D2 = '00001250'X	 !  Shadowing spare
	PARAMETER SYI$_SHADOW_D3 = '00001251'X	 !  Shadowing spare
	PARAMETER SYI$_SHADOW_D4 = '00001252'X	 !  Shadowing spare
	PARAMETER SYI$_SHADOW_D5 = '00001253'X	 !  Shadowing spare
	PARAMETER SYI$_WBM_D1 = '00001254'X	 !  Write Bit Map for HBMM
	PARAMETER SYI$_TTY_DEFCHAR3 = '00001255'X  !  Terminal characteristics, 3nd 
 !   longword only lower 16 attributes 
 !   upper 16 bits are Asian VMS bits
	PARAMETER SYI$_VHPT_SIZE = '00001256'X	 !  Size of VHPT on IA64 only
	PARAMETER SYI$_SHADOW_HBMM_RTC = '00001258'X  !  HBMM Reset Threshold Check Timer Interval
	PARAMETER SYI$_FCLAN_FRAME = '00001259'X  !  Fibre Channel LAN frame size
	PARAMETER SYI$_MAX_PFN_64 = '0000125A'X	 !  Returns contents of MMG$GQ_MAXPFN
	PARAMETER SYI$_PFN_MEMORY_MAP_64 = '0000125B'X  !  Returns a 64 bit physical memory map
	PARAMETER SYI$_CPU_SOCKETS = '0000125C'X  !  Returns number of cpu sockets
	PARAMETER SYI$_ERLBUFFERPAG_S2 = '0000125D'X  !  Number of pagelets per S2 error log buffer
	PARAMETER SYI$_ERRORLOGBUFF_S2 = '0000125E'X  !  Number of S2 error log buffers
	PARAMETER SYI$_SHADOW_PSM_RDLY = '0000125F'X  !  Shadowing Per Served Member Recovery Delay
	PARAMETER SYI$_SYSTEM_UUID = '00001260'X  !  Returns the system UUID on Itanium systems
	PARAMETER SYI$_PLATF_SPT_D1 = '00001261'X  !  Reserved to VMS platform support (dynamic)
	PARAMETER SYI$_PLATF_SPT_D2 = '00001262'X  !  "		
	PARAMETER SYI$_PLATF_SPT_D3 = '00001263'X  !  "		
	PARAMETER SYI$_PLATF_SPT_D4 = '00001264'X  !  "		
	PARAMETER SYI$_PLATF_SPT_1 = '00001265'X  !  Reserved to VMS platform support (static)
	PARAMETER SYI$_PLATF_SPT_2 = '00001266'X  !  "
	PARAMETER SYI$_PLATF_SPT_3 = '00001267'X  !  "		
	PARAMETER SYI$_PLATF_SPT_4 = '00001268'X  !  "		
	PARAMETER SYI$_SWIS_LOG = '00001269'X	 !  Knob to change the swis log
	PARAMETER SYI$_EXECSTACKPAGES = '0000126A'X  !  Number of pages for RMS EXEC ASB or RSE stack
	PARAMETER SYI$_GB_CACHEALLMAX = '0000126B'X  !  RMS global buffer cache whole file criterion
	PARAMETER SYI$_GB_DEFPERCENT = '0000126C'X  !  RMS global buffer cache default percent criterion
	PARAMETER SYI$_CPU_THREADING = '0000126D'X  !  Knob to change how we deal with CPU hardware threads
	PARAMETER SYI$_CPU_POWER_MGMT = '0000126E'X  !  Control Power Managment on IPF
	PARAMETER SYI$_CPU_POWER_THRSH = '0000126F'X  !  Idle Threshold necessary to use Power Management
	PARAMETER SYI$_SMP_CPU_BITMAP = '00001270'X  !  (1024-bit) Map of CPUs eligible for participation i
					!  (1024-bit) Map of CPUs eligible for participation in SMP sy
	PARAMETER SYI$_IO_PRCPU_BITMAP = '00001271'X  !  (1024-bit) Map of CPUs for fast path I/O processing
	PARAMETER SYI$_LOCKRMWT = '00001272'X	 !  Lock Remaster Weight
	PARAMETER SYI$_SAS_NAMING = '00001273'X	 !  SAS Device Naming
	PARAMETER SYI$_ACTIVE_CPU_BITMAP = '00001274'X  !  CBB bitmap data
	PARAMETER SYI$_AVAIL_CPU_BITMAP = '00001275'X  !    of CPUs
	PARAMETER SYI$_POTENTIAL_CPU_BITMAP = '00001276'X  !    in various
	PARAMETER SYI$_POWERED_CPU_BITMAP = '00001277'X  !    states
	PARAMETER SYI$_PRESENT_CPU_BITMAP = '00001278'X  !    ...
	PARAMETER SYI$_COMPLEX_ID = '00001279'X	 !  Complex Profile ID
	PARAMETER SYI$_COMPLEX_NAME = '0000127A'X  !  Complex Profile Name
	PARAMETER SYI$_HP_ID = '0000127B'X	 !  Hard Partition ID (nPar ID)
	PARAMETER SYI$_HP_NAME = '0000127C'X	 !  Hard Partition Name (nPar Name)
	PARAMETER SYI$_CELLULAR_PLATFORM = '0000127D'X  !  System is cell-based
	PARAMETER SYI$_BOOT_DEVICE = '0000127E'X  !  sys$ar_bootucb
	PARAMETER SYI$_HP_CORE_CNT = '0000127F'X  !  Count of unique cores in hard partition
	PARAMETER SYI$_ACTIVE_CORE_CNT = '00001280'X  !  Count of cores in hard partition with at least one
					!  Count of cores in hard partition with at least one active L
	PARAMETER SYI$_SSIO_SYNC_INTVL = '00001281'X  !  Interval at which dirty shared stream I/O buffers 
 !    written to disk by process doing sync()
	PARAMETER SYI$_SCH_SOFT_OFFLD = '00001282'X  !  Bitmap of CPUs sometimes excluded from scheduling
	PARAMETER SYI$_SCH_HARD_OFFLD = '00001283'X  !  Bitmap of CPUs excluded from scheduling
	PARAMETER SYI$_SCHED_FLAGS = '00001284'X  !  Reserved cell for sched noodling, replaces parameter S
					!  Reserved cell for sched noodling, replaces parameter SCH_CT
 ! 	ADD 'EXE' (LONGWORD) ITEM-CODES *ONLY* JUST BEFORE THIS COMMENT ********
 ! 	DO NOT ADD 'FLD' (FIELD) ITEMS HERE!!!! ADD THEM BEFORE 'LASTFLD' ******
	PARAMETER SYI$_LASTEXE = '00001285'X	 !  LAST INDEX 
 ! 	The following item-codes are for 'sub-field data' items.
 ! 	There usually exists another item-code to retrieve the
 ! 	whole parent cell (longword) - in the EXE section above.
	PARAMETER SYI$_CPU = '00002000'X	 !  CPU type
	PARAMETER SYI$_BUGREBOOT = '00002001'X	 !  Bugcheck reboot enable
	PARAMETER SYI$_CRDENABLE = '00002002'X	 !  Memory error checking enable
	PARAMETER SYI$_DUMPBUG = '00002003'X	 !  Bugcheck dump enable
	PARAMETER SYI$_BUGCHECKFATAL = '00002004'X  !  All bugchecks become fatal
	PARAMETER SYI$_ACP_MULTIPLE = '00002005'X  !  New ACP for each disk class
	PARAMETER SYI$_NOAUTOCONFIG = '00002006'X  !  Auto configuration inhibit
	PARAMETER SYI$_NOCLOCK = '00002007'X	 !  Interval timer inhibit
	PARAMETER SYI$_NOCLUSTER = '00002008'X	 !  Page read clustering inhibit
	PARAMETER SYI$_POOLPAGING = '00002009'X	 !  Enable paging of paged pool
	PARAMETER SYI$_SBIERRENABLE = '0000200A'X  !  SBI error detection enable
	PARAMETER SYI$_SETTIME = '0000200B'X	 !  Force entry of time at system boot
	PARAMETER SYI$_ACP_SHARE = '0000200C'X	 !  Enable sharing of F11ACP
	PARAMETER SYI$_SYSPAGING = '0000200D'X	 !  Enable paging of system code
	PARAMETER SYI$_UAFALTERNATE = '0000200E'X  !  Select alternate authorization file
	PARAMETER SYI$_WRITABLESYS = '0000200F'X  !  Leave system writable for debugging
	PARAMETER SYI$_RESALLOC = '00002010'X	 !  Enable resource allocation checking
	PARAMETER SYI$_SSINHIBIT = '00002011'X	 !  Inhibit system services for processes
	PARAMETER SYI$_CONCEAL_DEVICES = '00002012'X  !  Enable concealed devices
	PARAMETER SYI$_SAVEDUMP = '00002013'X	 !  Save dump if it's in page file
	PARAMETER SYI$_MOUNTMSG = '00002014'X	 !  Enable oper notification of vol mounts
	PARAMETER SYI$_DISMOUMSG = '00002015'X	 !  Enable oper notification of vol dism
	PARAMETER SYI$_LOADERAPT = '00002016'X	 !  Load alt erase pattern generator
	PARAMETER SYI$_LOADCHKPRT = '00002017'X	 !  Load alt protection check routine
	PARAMETER SYI$_XCPU = '00002018'X	 !  CPU subtype (Extended SID info)
	PARAMETER SYI$_CJFLOAD = '00002019'X	 !  Load common journaling code
	PARAMETER SYI$_CJFSYSRUJ = '0000201A'X	 !  Load recovery unit journaling code
	PARAMETER SYI$_NODE_AREA = '0000201B'X	 !  System ID node area
	PARAMETER SYI$_NODE_NUMBER = '0000201C'X  !  System ID node number
	PARAMETER SYI$_CLASS_PROT = '0000201D'X	 !  Non-discretionary check flag
	PARAMETER SYI$_CHARACTER_EMULATED = '0000201E'X  !  Character string instructions emulated
	PARAMETER SYI$_DECIMAL_EMULATED = '0000201F'X  !  Decimal string instructions emulated
	PARAMETER SYI$_D_FLOAT_EMULATED = '00002020'X  !  D floating instructions emulated
	PARAMETER SYI$_F_FLOAT_EMULATED = '00002021'X  !  F floating instructions emulated
	PARAMETER SYI$_G_FLOAT_EMULATED = '00002022'X  !  G floating instructions emulated
	PARAMETER SYI$_H_FLOAT_EMULATED = '00002023'X  !  H floating instructions emulated
	PARAMETER SYI$_LOADMTACCESS = '00002024'X  !  Load installation specific access routine
	PARAMETER SYI$_ACP_XQP_RES = '00002025'X  !  Resident XQP
	PARAMETER SYI$_WRITESYSPARAMS = '00002026'X  !  Write active parameters to the system .PAR file
	PARAMETER SYI$_LGI_BRK_TERM = '00002027'X  !  Use term name in breakin detection
	PARAMETER SYI$_LGI_BRK_DISUSER = '00002028'X  !  Disable user account on breakin
	PARAMETER SYI$_ACP_REBLDSYSD = '00002029'X  !  Rebuild system disk when mounting it
	PARAMETER SYI$_WS_OPA0 = '0000202A'X	 !  Workstation using QVSS for OPA0
	PARAMETER SYI$_NOPGFLSWP = '0000202B'X	 !  Inhibit swapping into pagefiles
	PARAMETER SYI$_LOAD_SYS_IMAGES = '0000202D'X  !  Control of how system images are loaded
	PARAMETER SYI$_NISCS_CONV_BOOT = '0000202E'X  !  Allow remote conversational boot
	PARAMETER SYI$_NISCS_LOAD_PEA0 = '0000202F'X  !  Load NI-SCS driver for PEA0
	PARAMETER SYI$_SA_APP = '00002030'X	 !  Booting stand-alone application (SA-BACKUP)
	PARAMETER SYI$_LOAD_PWD_POLICY = '00002031'X  !  Load site-specific password policy
	PARAMETER SYI$_FT_ACTIVE = '00002032'X	 !  CIRRUS system is fully active
	PARAMETER SYI$_WLKSYSDSK = '00002034'X	 !  Booting with write locked sys disk
	PARAMETER SYI$_DBGTK_LOADED = '00002035'X  !  Remote system debugger target kernel is loaded
	PARAMETER SYI$_DAY_OVERRIDE = '00002036'X  !  UAF day classifications are overridden
	PARAMETER SYI$_DAY_SECONDARY = '00002037'X  !  UAF day override is to Secondary
	PARAMETER SYI$_CWLOGICALS = '00002038'X	 !  State of CAP_CWLOGICALS 
	PARAMETER SYI$_POWEROFF = '00002039'X	 !  Enable software power-off
	PARAMETER SYI$_MPDEV_ENABLE = '0000203A'X  !  Multipath I/O switching control parameter
	PARAMETER SYI$_MPDEV_REMOTE = '0000203B'X  !  Multipath I/O switching control parameter for remote 
	PARAMETER SYI$_MPDEV_POLLER = '0000203C'X  !  Multipath poller parameter 
	PARAMETER SYI$_LCKMGR_MODE = '0000203D'X  !  Lock Manager Mode
	PARAMETER SYI$_LCKMGR_RSVD = '0000203E'X  !  Lock Manager Reserved
	PARAMETER SYI$_LCKMGR_CPUID = '0000203F'X  !  Lock Manager CPU ID
	PARAMETER SYI$_PERSISTENT_RES = '00002040'X  !  Fibre SCSI Reservation Support
	PARAMETER SYI$_SYSSER_LOGGING = '00002041'X  !  Enable system service logging
	PARAMETER SYI$_SCSI_ERROR_POLL = '00002042'X  !  Enable polling to flush SCSI errors
	PARAMETER SYI$_SSI_ENABLE = '00002043'X	 !  Enable system service intercept on I64
	PARAMETER SYI$_VIRTUAL_MACHINE = '00002044'X  !  True if we're running on a VMS guest under HPVM --
					!  True if we're running on a VMS guest under HPVM -- useful o
 ! 	ADD 'FLD' (FIELD) ITEM-CODES *ONLY* JUST BEFORE THIS COMMENT ***********
 ! 	DO NOT ADD 'EXE' (LONGWORD) ITEMS HERE!!!! ADD THEM BEFORE 'LASTEXE' ***
	PARAMETER SYI$_LASTFLD = '00002045'X	 !  LAST INDEX 
 !   ) equals SYI$C_FLDTYPE@12 increment 1  prefix SYI tag $;
 ! *
 ! *	THE FOLLOWING DEFINITIONS EXIST FOR COMPATIBILITY WITH THE 1ST
 ! *	IMPLEMENTATION OF SYS$GETSYI.  DO NOT CHANGE THEM!!!
 ! *	ADD NEW GETSYI ITEM-CODES ONLY TO THE PREVIOUS LISTS.
 ! *
	PARAMETER SYI$C_SFWTYPE = '00000001'X	 !  SYSTEM SOFTWARE ITEM 
	PARAMETER SYI$C_HDWTYPE = '00000002'X	 !  HARDWARE ITEM 
	PARAMETER SYI$C_LISTEND = '00000000'X	 !  ITMLST TERMINATOR 
 !  IDENTIFIER FOR SYSTEM SOFTWARE 
	PARAMETER SYI$_OLDVERSION = '00000100'X	 !  VMS VERSION NUMBER 
	PARAMETER SYI$_LASTSFW = '00000101'X	 !  LAST INDEX 
 !  *******************************************************************
 !  ********************* BEGIN TEMP FIX ******************************
 !  ********************* BEGIN TEMP FIX ******************************
 !  *******************************************************************
 !   ) equals SYI$C_SFWTYPE@8 increment 1  prefix SYI tag $;
 !  *******************************************************************
 !  ********************** END TEMP FIX *******************************
 !  ********************** END TEMP FIX *******************************
 !  *******************************************************************
 !  IDENTIFIER FOR HARDWARE TYPE 
	PARAMETER SYI$_OLDCPU = '00000200'X	 !  CPU TYPE 
	PARAMETER SYI$_OLDSID = '00000201'X	 !  SYSTEM ID REGISTER 
	PARAMETER SYI$_LASTHDW = '00000202'X	 !  LAST INDEX 
 !     ) equals SYI$C_HDWTYPE@8 increment 1  prefix SYI tag $;
 !  Define constant for the length of environmental vector item codes 
 !  (POWER_VECTOR, TEMPERATURE_VECTOR, THERMAL_VECTOR, and FAN_VECTOR).
	PARAMETER SYI$K_ENV_VECTOR_LENGTH = '00000010'X
 !  Define status code for each element in the environmental vector
	PARAMETER SYI$K_ENV_STATUS_FAILED = '00000000'X
	PARAMETER SYI$K_ENV_STATUS_OK = '00000001'X
	PARAMETER SYI$K_ENV_STATUS_NOT_PRESENT = '000000FF'X
	PARAMETER SYI$K_ENV_STATUS_UNKNOWN = '000000FE'X
 !  Define the SYI$_ARCH_TYPE return constants
	PARAMETER SYI$K_ARCH_OTHER = '00000000'X  !  Unknown SYI$_ARCH_TYPE
	PARAMETER SYI$K_ARCH_VAX = '00000001'X	 !  VAX Architecture
	PARAMETER SYI$K_ARCH_ALPHA = '00000002'X  !  Alpha Architecture
	PARAMETER SYI$K_ARCH_IA64 = '00000003'X	 !  IA-64 (IPF) Architecture
!DEC$ END OPTIONS