1 /ABORT
By default, if an error occurs while processing an input message
file or recipient address, PMDF SEND will ask the user whether
or not to send the message anyhow. If the /ABORT qualifier is
specified, then PMDF SEND will merely exit (with an error) when a
problem occurs during file or address processing.
The /ABORT and /IGNORE qualifiers are mutually exclusive - only
one or the other may be used.
The /ABORT qualifier has no effect on interactive PMDF MAIL
sessions.
2 /BCC_LIST
/BCC_LIST=address[,...]
/CC_LIST=address[,...]
/TO_LIST=address[,...]
Specify one or more To:, Cc:, or Bcc: recipient addresses. When
specifying more than one addressee of a given type (To:, Cc:, or
Bcc:), enclose the addresses in parentheses as in
/TO_LIST=("sue@example.com","bob@example.com")
The /BCC_LIST, /CC_LIST, and /TO_LIST qualifiers have no effect
on interactive PMDF MAIL sessions.
3 /BCC_PROMPT
/BCC_PROMPT
/CC_PROMPT
/TO_PROMPT
Request to be prompted for To:, Cc:, or Bcc: recipient addresses.
By default you are only prompted once for each selected type
(To:, Cc:, or Bcc:). If /MULTIPLE has also been specified, then
for each selected type you will be prompted repeatedly until a
blank line is entered.
The /BCC_PROMPT, /CC_PROMPT, and /TO_PROMPT qualifiers have no
effect on interactive PMDF MAIL sessions.
4 /CAPTIVE
When /CAPTIVE is specified, PMDF MAIL will treat the user as
though they were a captive user and not allow them to perform
operations such as spawning.
5 /COMMENTS
/COMMENTS=comments
This qualifier may be used to specify the contents of the
Comments: header line. If this qualifier is not specified and the
PMDF_COMMENTS logical is not defined, then no Comments: header
line will be generated.
The /COMMENTS qualifier has no effect on interactive PMDF MAIL
sessions.
6 /BLOCK
/BLOCK
/RECORD
/TEXT
Specify the file access mode to use when processing the files to
send. The default depends upon the file extension.
The /BLOCK, /RECORD, and /TEXT qualifiers have no effect on
interactive PMDF MAIL sessions.
7 /CONFIRM
/CONFIRM[=keyword[,...]]
Specifies for interactive PMDF MAIL sessions, which operations
should be confirmed prior to actually taking. By default,
/CONFIRM=NONE is assumed. The accepted keyword values are
ADDRESS
Confirm each recipient address.
ALL
Confirm all actions when sending, extracting, forwarding, or
replying to messages.
DIGEST
Confirm each digest element when creating a message digest.
EXTRACT
Confirm when extracting a message.
FORWARD
Confirm when forwarding a message.
NONE
Never request confirmation except when the /CONFIRM qualifier is
used with an interactive command.
PRINT
Confirm when printing a message.
REPLY
Confirm when replying to a message.
RESEND
Confirm when resending a message.
SEND
Confirm when sending a message.
If /CONFIRM is specified without any keyword values, then
/CONFIRM=ALL is assumed.
8 /ENCODING
/ENCODING=encoding
Specify the encoding method to use to encode an input message
file. Typically, no encoding is used; however, this depends
upon the file type as determined from the file extension. The
available encoding methods are 7BIT, 8BIT, BASE32, BASE64,
BINHEX, BTOA, COMPRESSED-BASE64, BASE85, HEXADECIMAL, PATHWORKS,
QUOTED_PRINTABLE, UUENCODE, and COMPRESSED-UUENCODE.
9 /EDIT
/EDIT[=keyword[,...]]
Specifies for interactive PMDF MAIL sessions, which commands
implicitly invoke the editor. The accepted keyword values are
ALL
Always invoke the editor in conjunction with all commands that
accept the /EDIT qualifier.
COMMAND_LINE
In conjunction with /EDIT=SEND, invoke the editor even when
sending a file or message from the DCL command line.
DIRECTORY
Always invoke the editor to display DIRECTORY and
DIRECTORY/FOLDER listings.
FORWARD
Always invoke the editor to edit messages being forwarded with
the FORWARD command.
HEADER
By default the message's header is always displayed in the
editor. To inhibit this, specify /EDIT=NOHEADER.
KEPT[=editor-process-name]
Initially invoke the editor as a subprocess; re-attach to the
subprocess for subsequent editor operations.
NONE
Never invoke the editor unless explicitly requested to do so with
the /EDIT qualifier.
READ
Always invoke the editor to display messages being read with the
READ, CURRENT, BACK, NEXT, FIRST, and LAST commands.
REPLY[=EXTRACT[=quote]]
Always invoke the editor to edit messages being replied to with
the ANSWER or REPLY commands. If the optional EXTRACT keyword
is specified, then the content of the message being replied to
will be included in the reply. To specify a text string to use
to quote each line of the extracted message text, specify a value
for the EXTRACT keyword. For instance, to quote each line with
the two characters "> ", invoke PMDF MAIL with the command
$ PMDF MAIL/EDIT=REPLY=EXTRACT="> "
SEND
Always invoke the editor to compose messages being sent with the
MAIL or SEND commands.
If /EDIT is specified without any keyword values, then
/EDIT=(SEND,REPLY) is assumed.
10 /ENCAPSULATE
/ENCAPSULATE[=keyword[,...]]
/NOENCAPSULATE[=keyword[,...]]
For interactive PMDF MAIL sessions, specifies file encapsulation
defaults for the FORWARD, SEND, and REPLY commands as well as the
synonymous commands MAIL and ANSWER. The accepted keyword values
are FORWARD, SEND, REPLY, ALL, and NONE.
The /ENCAPSULATE qualifier specifies which commands should
by default encapsulate files as separate attachments; the
/NOENCAPSULATE qualifier specifies which commands should not
by default encapsulate files as separate message attachments.
Specifying /ENCAPSULATE without any qualifiers implies
/ENCAPSULATE=ALL, and specifying /NOENCAPSULATE without any
qualifiers implies /ENCAPSULATE=NONE.
11 /ENTIRE
/ENTIRE[=keyword[,...]]
/MESSAGE[=keyword[,...]]
/PART[=keyword[,...]]
For interactive PMDF MAIL sessions, specifies message content
scope for EXTRACT, FORWARD, PRINT, and REPLY commands. The
accepted keyword values are EXTRACT, FORWARD, PRINT, REPLY, ALL,
and NONE.
The /ENTIRE qualifier specifies which commands by default act
upon the entire message. The /MESSAGE qualifier specifies
which commands by default act upon only the current portion of
the message which constitutes an entire message. (Note that a
message may contain one or more messages as subparts.) The /PART
qualifier specifies which commands by default act upon only the
current message body part.
Specifying /ENTIRE without any qualifiers implies /ENTIRE=ALL;
specifying /MESSAGE without any qualifiers implies /MESSAGE=ALL;
and specifying /PART without any qualifiers implies /PART=ALL.
12 /FILENAME
/FILENAME
/NOFILENAME (default)
The /FILENAME qualifier specifies that the original file name
should be included in the message headers.
13 /FILTER_CTRL
/FILTER_CTRL
/NOFILTER_CTRL (default)
For interactive PMDF MAIL sessions, specifying /FILTER_CTRL turns
on the filtering out of 7-bit and 8-bit control characters in
messages. Messages which contain such control characters can
cause problems with the terminal when they are displayed. When
/FILTER_CTRL is specified, such a character is displayed as its
hexidecimal value in the format "=XX".
14 /FROM
/FROM=address
This qualifier may be used to specify the contents of the From:
header line. If this qualifier is not specified and the PMDF_
FROM logical is not defined, then a From: header line will be
constructed from the username of the user invoking PMDF MAIL
and the local host name. Note that even if a From: address is
provided, the invoking user's address will appear in a Sender:
header line.
The /FROM qualifier has no effect on interactive PMDF MAIL
sessions.
15 /IGNORE
By default, if an error occurs while processing an input message
file or recipient address, PMDF MAIL will ask the user whether
or not to send the message anyhow. If the /IGNORE qualifier is
specified, then PMDF MAIL will not ask the user whether or not
to send the message-it will send the good input files to the good
recipient addresses.
The /ABORT and /IGNORE qualifiers are mutually exclusive - only
one or the other may be used.
The /IGNORE qualifier has no effect on interactive PMDF MAIL
sessions.
16 /LIST
/LIST (default)
/NOLIST
When specified, /NOLIST becomes the default for the ANSWER and
REPLY commands.
17 /MESSAGE
/MESSAGE (default)
See /ENTIRE.
18 /MULTIPLE
/MULTIPLE
/SINGLE (default)
Normally, only a single prompt is made for each type of address
selected with the /TO_PROMPT, /CC_PROMPT, and /BCC_PROMPT
qualifiers. When /MULTIPLE is specified, these prompts will be
repeated for each selected address type until a blank line is
entered.
The /MULTIPLE and /SINGLE qualifiers have no effect on
interactive PMDF MAIL sessions.
19 /PART
See /ENTIRE.
20 /PERSONAL_NAME
/PERSONAL_NAME=name
/NOPERSONAL_NAME
Specify a personal name field to use in conjunction with your
return address. Any value specified will override your SET
PERSONAL_NAME profile setting. If /NOPERSONAL_NAME is specified,
then no personal name field will appear in the return address.
The /PERSONAL_NAME qualifier has no effect on interactive PMDF
MAIL sessions.
21 /PREVALIDATE
/PREVALIDATE
/NOPREVALIDATE (default)
Prevalidate recipient addresses prior to invoking the editor
to compose a message. If any illegal addresses are detected,
PMDF MAIL will ask whether to cancel the operation or to proceed
anyway. If told to proceed, both the good and bad addresses will
appear in the editor where they may be modified as necessary.
Validation will, of course, still be performed after the editor
is exited.
22 /PRIORITY
/PRIORITY=priority
This qualifier may be used to specify the contents of the
Priority: header line. If this qualifier is not specified, then
no Priority: header line will be generated.
The /PRIORITY qualifier has no effect on interactive PMDF MAIL
sessions.
23 /REMOVE
/REMOVE[=keyword[,...]]
/NOREMOVE[=keyword[,...]]
For interactive PMDF MAIL sessions, specifies /REMOVE or
/NOREMOVE defaults for the FORWARD, REPLY, RESEND, and SEND
commands. The accepted keyword values are FORWARD, REPLY, RESEND,
SEND, ALL, and NONE.
The /REMOVE qualifier specifies which commands by default assume
/REMOVE. The /NOREMOVE qualifier specifies which commands
by default assume /NOREMOVE. Specifying /REMOVE without any
qualifiers implies /REMOVE=ALL while specifying /NOREMOVE without
any qualifiers implies /NOREMOVE=ALL.
24 /REPEATED
/REPEATED (default)
/NOREPEATED
Specify /REPEATED to imply /REPEATED for all REPLY/ALL commands;
specify /NOREPEATED to imply /NOREPEATED for all REPLY/ALL
commands.
25 /REPLY_TO
/REPLY_TO=address
This qualifier may be used to specify the contents of the Reply-
to: header line. If this qualifier is not specified and the PMDF_
REPLY_TO logical is not defined, then no Reply-to: header line
will be generated.
The /REPLY_TO qualifier has no effect on interactive PMDF MAIL
sessions.
26 /SCAN_COMMANDS
/SCAN_COMMANDS (default)
/NOSCAN_COMMANDS
By default, the command line is scanned for errors as it is
entered and errors are signalled immediately. Specify /NOSCAN_
COMMANDS to have errors only signalled after the entire command
has been entered and the RETURN key pressed.
27 /SELF
/SELF[=keyword[,...]]
/NOSELF[=keyword[,...]]
For interactive PMDF MAIL sessions, specifies for which types
of message sending operations you will automatically receive
copies of messages you originate. The accepted keyword values are
FORWARD, REPLY, RESEND, SEND, ALL, and NONE.
The /SELF qualifier specifies for which types of operations you
will receive a copy of messages sent. The /NOSELF qualifier
specifies for which operation types you will not receive a
message copy. Specifying /SELF without any qualifiers implies
/SELF=ALL while specifying /NOSELF without any qualifiers implies
/NOSELF=ALL.
Any settings made with the /SELF and /NOSELF qualifiers will be
overridden by any positive SET COPY_SELF profile settings.
28 /SENSITIVITY
/SENSITIVITY=sensitivity
This qualifier may be used to specify the contents of the
Sensitivity: header line. If this qualifier is not specified and
the PMDF_SENSITIVITY logical is not defined, then no Sensitivity:
header line will be generated.
The /SENSITIVITY qualifier has no effect on interactive PMDF MAIL
sessions.
29 /SIGNATURE
/SIGNATURE=signature-line
/SIGNATURE="@file-spec"
/NOSIGNATURE
Specify a signature line or file to append to the end of the
message being sent. If /NOSIGNATURE is specified, then no
signature will be appended.
The /SIGNATURE qualifier has no effect on interactive PMDF MAIL
sessions.
30 /SSA
/SSA
/NOSSA (default)
Show aliases in the system alias database as well as in your
personal alias database. Non-privileged users will have read-only
access to the system alias database.
31 /SSUBADDRESS
/SSUBADDRESS=subaddress
Specify a subaddress to attach to your address in message copies
sent to you via the COPY_SELF mechanism.
32 /SUBADDRESS
/SUBADDRESS=subaddress
Specify a subaddress to attach to the envelope From: address;
e.g., if the envelope From: address is prospero@example.com then
specifying /SUBADDRESS="Postmaster" would result in the envelope
From: address prospero+Postmaster@example.com.
The /SUBADDRESS qualifier has no effect on interactive PMDF MAIL
sessions.
33 /SUBJECT
/SUBJECT=subject
Specify the contents of the Subject: header line. If this
qualifier is not specified, then no Subject: header line will
be generated. If it is specified, but no value given, then the
user will be prompted for a value.
The /SUBJECT qualifier has no effect on interactive PMDF MAIL
sessions.
34 /TOC
/TOC (default)
/NOTOC
Show a table of contents for each displayed multipart message.
The table of contents is not actually part of the message.
35 /TRIM
/TRIM[=keyword[,...]]
/NOTRIM[=keyword[,...]]
For interactive PMDF MAIL sessions, specifies for which
operations header lines will automatically be trimmed or left
intact. The accepted keyword values are EXTRACT, FORWARD, PRINT,
REPLY, RESEND, SEND, ALL, and NONE.
The /TRIM qualifier specifies which commands by default assume
/TRIM; the /NOTRIM qualifier specifies which commands by default
assume /NOTRIM. Specifying /TRIM without any qualifiers implies
/TRIM=ALL while specifying /NOTRIM without any qualifiers implies
/NOTRIM=ALL.
36 /USER
/USER=username
Specify the local username to use in the message sender's address
(this will be the From: address if no other From: address is
given and the Sender: address otherwise. You must either have
WORLD privilege or hold the PMDF_WORLD or PMDF_WORLD_username
rightslist identifier in order to use this qualifier and specify
a username other than your own. The special case of a blank
string will not insert any Sender: information.
The /USER qualifier has no effect on interactive PMDF MAIL
sessions.