Displays information in the volatile device database. If the
LANACP process is not running, displays a list of current LAN
devices.
Format
SHOW DEVICE device-name
1 – Parameter
device-name
Supplies the LAN controller device name. The device name has
the form ddcu where dd is the device code, c is the controller
designation, and u is the unit number. LAN devices are specified
as the name of the template device which is unit 0. For example,
the first DE435 Ethernet device is specified as EWA0, the second
as EWB0.
For example, you can specify a DEMNA controller as EXA, EXA0,
or EXA0:. This refers to the LAN template device, for which is
maintained most of the device parameters and counters. Also,
the device name can refer to a device unit representing an
actual user or protocol. For example, the cluster protocol can
be started on a device as EWA1. You can specify specific device
units to view unit-specific parameter information.
If you do not specify a device name, all devices are displayed.
If you specify a device name, all matching LAN devices are
displayed, for example: E to select all Ethernet devices, F
for FDDI, I for Token Ring, EW to select all Ethernet PCI Tulip
devices.
NOTE
If you do not specify a qualifier, the utility displays the
matching devices without additional information.
2 – Qualifiers
2.1 /ALL
Shows all devices that match device name.
2.2 /CHARACTERISTICS
/CHARACTERISTICS or PARAMETERS
Displays status and related information about the device.
2.3 /CLEAR_COUNTERS
Clears device counters and internal driver counters after a
SHOW DEVICE/COUNTERS or SHOW DEVICE/INTERNAL_COUNTERS command.
Subsequent SHOW commands show the counter values accumulated
since the clear was done.
This affects counters displayed by LANCP only.
See the /RESTORE_COUNTERS to restore counters to the original
values.
2.4 /COUNTERS
Displays device counters.
2.5 /DLL
/DLL or MOPDLL
Displays LAN volatile device database information related to MOP
downline load for the device.
2.6 /INTERNAL_COUNTERS
Displays internal counters. By default, it does not display zero
counters. To see all counters, including zero, use the additional
qualifier /ZERO. To see the debug counters, use the additional
qualifier /DEBUG.
2.7 /MAP
Displays the current configuration of the functional address
mapping table.
2.8 /MESSAGES
Displays the console messages displayed by the LAN driver as part
of the LAN driver internal counters. This qualifier is included
for convenience, to avoid scanning the internal counters to get
to the message data.
2.9 /OUTPUT
/OUTPUT=file-name
Creates the specified file and directs output to it.
2.10 /RESTORE_COUNTERS
Restores device counters and internal driver counters prior to
a SHOW DEVICE/COUNTERS or SHOW DEVICE/INTERNAL_COUNTERS command.
See the /CLEAR_COUNTERS to clear the counters.
2.11 /REVISION
Displays the current LAN driver and device revision information,
if available or applicable. Not all LAN drivers maintain revision
information.
2.12 /SR_ENTRY
Displays the contents of the current Token Ring source routing
cache table.
2.13 /TRACE
Displays LAN driver trace data.
2.14 /VLAN
Displays a list of IEEE 802.1Q tags that are configured on the
switch port connected to the specified physical LAN device.
LANCP listens for the GVRP packets that contain the configuration
information and displays the configured tags.
The switch periodically sends GVRP (GARP VLAN Registration
Protocol) (GARP = Generic Attribute Registration Protocol)
packets to provide VLAN configuration information in compliance
with the IEEE 802.1Q specification. If GVRP is not configured on
the switch, or if the LAN device is not connected to a switch,
this command displays only the list of tags that the VLAN driver
has configured.
3 – Examples
1.LANCP> SHOW DEVICE/COUNTERS EXA0
Device Counters EXA0:
Value Counter
----- -------
259225 Seconds since last zeroed
5890496 Data blocks received
4801439 Multicast blocks received
131074 Receive failure
764348985 Bytes received
543019961 Multicast bytes received
3 Data overrun
1533610 Data blocks sent
115568 Multicast packets transmitted
122578 Blocks sent, multiple collisions
86000 Blocks sent, single collision
189039 Blocks sent, initially deferred
198120720 Bytes sent
13232578 Multicast bytes transmitted
7274529 Send failure
0 Collision detect check failure
0 Unrecognized frame destination
0 System buffer unavailable
0 User buffer unavailable
This command displays counters for Ethernet device EXA0.
2.LANCP> SHOW DEVICE/MAP ICA0
Multicast to Functional Address Mapping ICA0:
Multicast address Functional Address Bit-Reversed
----------------- ------------------ ------------
09-00-2B-00-00-04 03-00-00-00-02-00 C0:00:00:00:40:00
09-00-2B-00-00-05 03-00-00-00-01-00 C0:00:00:00:80:00
CF-00-00-00-00-00 03-00-00-08-00-00 C0:00:00:10:00:00
AB-00-00-01-00-00 03-00-02-00-00-00 C0:00:40:00:00:00
AB-00-00-02-00-00 03-00-04-00-00-00 C0:00:20:00:00:00
AB-00-00-03-00-00 03-00-08-00-00-00 C0:00:10:00:00:00
09-00-2B-02-00-00 03-00-08-00-00-00 C0:00:10:00:00:00
09-00-2B-02-01-0A 03-00-08-00-00-00 C0:00:10:00:00:00
AB-00-00-04-00-00 03-00-10-00-00-00 C0:00:08:00:00:00
09-00-2B-02-01-0B 03-00-10-00-00-00 C0:00:08:00:00:00
09-00-2B-00-00-07 03-00-20-00-00-00 C0:00:04:00:00:00
09-00-2B-00-00-0F 03-00-40-00-00-00 C0:00:02:00:00:00
09-00-2B-02-01-04 03-00-80-00-00-00 C0:00:01:00:00:00
09-00-2B-02-01-07 03-00-00-02-00-00 C0:00:00:40:00:00
09-00-2B-04-00-00 03-00-00-04-00-00 C0:00:00:20:00:00
09-00-2B-02-01-00 03-00-00-00-08-00 C0:00:00:00:10:00
09-00-2B-02-01-01 03-00-00-00-10-00 C0:00:00:00:08:00
09-00-2B-02-01-02 03-00-00-00-20-00 C0:00:00:00:04:00
03-00-00-00-00-01 03-00-00-00-00-01 C0:00:00:00:00:80
03-00-02-00-00-00 03-00-02-00-00-00 C0:00:40:00:00:00
This command displays mapping information for Token Ring device
ICA0.
3.LANCP> SHOW DEVICE/DLL
Device Listing, volatile database:
--- MOP Downline Load Service Characteristics ---
Device State Access Mode Clients Data Size
------ ----- ----------- ------- ---------
EXA0 Enabled Exclusive KnownClientsOnly 1400 bytes
FXA0 Disabled NoExclusive NoKnownClientsOnly 246 bytes
This command displays MOP downline load information in the LAN
volatile device database for all known devices.
4.LANCP> SHOW DEVICE/DLL EXA0
Device Listing, volatile database:
--- MOP Downline Load Service Characteristics ---
Device State Access Mode Clients Data Size
------ ----- ----------- ------- ---------
EXA0 Enabled Exclusive KnownClientsOnly 1400 bytes
This command displays MOP downline load information in the LAN
volatile device database for device EXA0.
5.LANCP> SHOW DEVICE/PARAMETERS IRA0
Device Parameters IRA0:
Value Parameter
----- ---------
Normal Controller mode
External Internal loopback mode
00-00-93-58-5D-32 Hardware LAN address
Token Ring Communication medium
Enabled Functional address mode
No Full duplex enable
No Full duplex operational
16 Line speed (megabits/second)
16 Mbps Ring speed
STP Line media
Enabled Early token release
Disabled Monitor contender
200 SR cache entries
2 SR discovery timer
60 SR Aging Timer
Enabled Source routing
3 Authorized access priority
AA-00-04-00-92-FF Upstream neighbor
0 Ring number
This command displays status and parameters information for
Token ring device IRA0.
6.LANCP> SHOW DEVICE/REVISION EWF0
Device Revisions EWF0:
Value Component
----- ---------
02000041 Device hardware revision
08020110 00000004 Port driver revision
08020172 00000001 LAN common routines revision
This command displays revision information for Ethernet device
EWF0:.
7.LANCP> SHOW DEVICE/SR_ENTRY ICA0
Source Routing Cache Table ICA0:
LAN address State XmtTmo RcvTmo StaleTmo DiscvTmo
----------------- ----- -------- -------- -------- --------
AA-00-04-00-92-FF LOCAL 00000028 00000028 00000245 00000000
This command displays source routing entry information for
Token Ring device ICA0.