DECNET_MIGRATE.HLB  —  REPORT
 Create a text report from previously collected configuration information.
 The information must have been gathered using the COLLECT command.

       REPORT output-text-file-name
         [DATA = input-data-file-name] -
         [TYPES = { ALL | (node-type-list)}] -
         [ROUTING_TYPE = { ALL | ROUTERS | L1_ROUTERS | L2_ROUTERS }] -
         [AREAS = { ALL | LOCAL | NODE:node-name }] -
         [INFORMATION = { ALL | BASIC | (info-list) }] -
         [FORMAT = { FULL | BRIEF }]

 Multiple REPORT commands may be issued against the same collected data.

 Example:  REPORT CONFIG_01_23_90.LIS

1  –  DATA 

 This optional parameter allows you to specify a particular collection
 data file to use when generating the report.

 If not specified, the collection file is assumed to have the same name
 as the output text file, with the extension changed to "DAT".

 Example:  REPORT CONFIG_01_23_90.LIS DATA=ARCHIVE_01_23_90.DAT

2  –  TYPES 

 This optional parameter allows you to specify the types of nodes to
 report information on.

     TYPES = ALL             All DECnet node types
     TYPES = OSI             Only DECnet-Plus nodes
     TYPES = PHASE_IV        Only DECnet Phase IV nodes
     TYPES = PHASE_III       Only DECnet Phase III nodes

 More than one type may be specified by placing the types in parentheses
 and separating them by commas.

 If this parameter is not specified, the default is "ALL".

 Example:  REPORT CONFIG_01_23_90.LIS TYPE=OSI
           REPORT CONFIG_01_23_90.LIS TYPES=(PHASE_IV,PHASE_III)

3  –  ROUTING_TYPE 

 This optional parameter allows you to specify the routing types of the
 nodes on which to to report information.

     ROUTING_TYPE = ALL             Routers and end systems
     ROUTING_TYPE = ROUTERS         Only Level 1 and Level 2 routers
     ROUTING_TYPE = L1_ROUTERS      Only Level 1 routers
     ROUTING_TYPE = L2_ROUTERS      Only Level 2 routers

 If a routing type is specified for which information was not collected,
 the report will not contain information on that routing type.

 If this parameter is not specified, the default is "ALL".

 Example:  REPORT CONFIG_01_23_90.LIS ROUTING_TYPE=L2

4  –  AREAS 

 This optional parameter allows you to specify the network area on which
 to report information.

     AREAS = ALL                 All areas
     AREAS = LOCAL               The management node's area
     AREAS = NODE:node-name      The area containing the specified node

 If the NODE option is used, the full name or the Phase IV synonym for
 the node must be supplied.  If this parameter is not specified, the
 default is "ALL".

 Example:  REPORT CONFIG_01_23_90.LIS AREA=LOCAL
           REPORT CONFIG_01_23_90.LIS AREA=NODE:.Paris.Hub_Node

5  –  INFORMATION 

 This optional parameter allows you to specify which information to report.
 The information that may be reported is:

     INFORMATION = ALL           Basic, adjacency, circuit, routing,
                                 application, and area information

     INFORMATION = BASIC         Name, address, phase, routing type, and
                                 node id string information

     INFORMATION = ADJACENCIES   Basic plus adjacency information

     INFORMATION = CIRCUITS      Basic plus circuit id and circuit cost
                                 information

     INFORMATION = ROUTING       Basic plus routing information (maximum
                                 hops, maximum cost, and network buffer
                                 size)

     INFORMATION = APPLICATIONS  Basic plus application information (the
                                 word OBJECTS may be used in place of
                                 APPLICATIONS)

     INFORMATION = AREAS         Basic plus area information, indicating
                                 what other areas are known by the
                                 level 2 routers in the current area.

 If more than one information type is specified, they must be placed in
 parentheses and separated by commas.

 If this parameter is not specified, the default will be "BASIC".

 Example:  REPORT CONFIG_01_23_90.LIS INFO=ROUTING
           REPORT CONFIG_01_23_90.LIS INFO=(ADJACENCIES, CIRCUITS)

6  –  FORMAT 

 This optional parameter allows you to specify the output file format.
 Formats are:

     FORMAT = FULL   Multiple lines per node.
     FORMAT = BRIEF  One line per node, with information in columns.

 The BRIEF format may be used only when reporting BASIC information.  If
 any other information is being reported, the FULL format must be used.

 If this parameter is not specified, the default is "FULL".

 Example:  REPORT CONFIG_01_23_90.LIS FORMAT=BRIEF
           REPORT CONFIG_01_23_90.LIS FORMAT=FULL
Close Help