VSI DECwindows Motif Version 1.7-D for OpenVMS I64 Systems

        This is the second release from VMS Software, Inc. (VSI) of the
        DECwindows Motif application.  This version is functionally
        equivalent to HP's DECwindows Motif V1.7, with the exception of
        the changes shown below.  For a complete description of the
        DECwindows Motif application, refer to the existing HP SPD at
        http://h71000.www7.hp.com/doc/spd.html#SPD.

        VSI DECwindows Motif V1.7-D has been modified to check for a
        license PAK from VMS Software, Inc.  You must have a license PAK
        from VMS Software, Inc. to use this product.  You can order a
        VSI license PAK from:

            o  VSI: Contact VSI at 978.451.0110
            o  HP:  Contact your HP representative

        Note that copyright notices in this product have been modified
        from HP to VSI.  However, text in help files, display screens,
        or other areas may still say HP.  This will be modified in a
        future release.



      VSI DECwindows Motif V1.7-C Changes
      -----------------------------------

      DECwindows and OPCOM Behavior at System Startup

        Modern systems may include graphics hardware or video capability
        even if the system is configured as a server, not a workstation. 
        By default, if a supported graphics device exists, the
        DECwindows components required for workstation support will be
        loaded during system startup.  Additionally, the behavior of
        OPCOM and the operator console OPA0: will be modified suitably
        for a workstation environment.

        If your system is not a DECwindows graphics workstation, add the
        following command to SYS$MANAGER:SYLOGICALS.COM:

          $ DEFINE /SYSTEM /EXECUTIVE DECW$IGNORE_WORKSTATION TRUE

        This will prevent unintended DECwindows actions for server-based
        systems with graphics capability.

        To insure that all components behave as intended, VSI recommends
        that you reboot the system after changing the
        DECW$IGNORE_WORKSTATION logical name.  The behavior of
        DECwindows startup has also been enhanced in VSI OpenVMS
        V8.4-1H1.  The OPC$OPA0_ENABLE logical name is now correctly
        honored for systems which want to explicitly control the
        behavior of the operator terminal, for either workstation or
        server-based systems.

        The logical names that control OPCOM behavior are documented in
        the SYLOGICALS.COM procedure, and its equivalent original state
        in SYLOGICALS.TEMPLATE.



      VSI DECwindows Motif V1.7-D Changes
      -----------------------------------

      DECwindows "Old" Motif Desktop Not Starting

        In VSI DECwindows Motif V1.7-C, attempting to start the "old"
        Motif desktop would result in the hourglass appearing repeatedly
        on the screen, and the repeated creation of the WSAn: process. 
        The DECwindows login box never appeared.

        This problem is fixed in VSI DECwindows Motif V1.7-D.



      VSI DECwindows Motif V1.7-E Changes
      -----------------------------------

      Scrollbar Not Working Properly

        Sliding the scroll bar up and down using the mouse causes the
        contents of the window to alternate between the top and bottom
        only.  To reach positions in the middle of the window, the user
        has to click the scrollbar above or below the slider, or press
        the arrow buttons above or below the scroll bar.

        This problem is fixed in VSI DECwindows Motif V1.7-E.