SYSMANHELP.HLB  —  Sys Parameters, TMSCP_LOAD
    TMSCP_LOAD allows the loading of the tape mass storage control
    protocol server software. The TMSCP_LOAD parameter also sets
    locally connected tapes served. For information about setting the
    TMSCP_LOAD parameter, see VSI OpenVMS Cluster Systems.

    Setting TMSCP_LOAD to 0 inhibits the loading of the tape server
    and the serving of local tapes. Setting TMSCP to 1 loads the
    tape server into memory at the time the system is booted and
    makes all directly connected tape drives available clusterwide.
    The following table describes the two states of the TMSCP_LOAD
    parameter:

    State  Function

    0      Do not load the TMSCP tape server. Do not serve any local
           tape devices clusterwide. This is the default value.

    1      Load the TMSCP tape server. Serve all local TMSCP tape
           devices clusterwide.

    TMSCP_LOAD is an AUTOGEN parameter.
Close Help