SCACP$HELP.HLB  —  STOP  TRACE
    Stops PEDRIVER tracing. You can read the trace data recorded so
    far with a SHOW TRACE command.

    To revert trace behavior to initial settings, enter the command
    SET TRACE/DEFAULT.

                                   NOTE

       This command is reserved for use by VSI Services and OpenVMS
       Engineering only. Trace commands and output are subject to
       change from release to release.

    Format

      STOP TRACE

1  –  Parameters

    None.

2  –  Qualifiers

    None.

3  –  Example

  SCACP> STOP TRACE

      The command in this example stops PEDRIVER tracing.
Close Help