NET$MGMT_HELP.HLB  —  actions  Delete

1  –  Alias 

    Pushing the CONTINUE button will delete the Alias entity and return you
    to the main window.   Any existing Alias Ports must be disabled and
    deleted before the Alias entity can be successfully deleted.

    Pushing the CANCEL button will dismiss the window with no action taken.

1.1  –  Port 

    Pushing the CONTINUE button will cause the specified Alias Port to be
    deleted from the system.  The Alias Port must be disabled before it can
    be successfully deleted.

    Pushing the CANCEL button will dismiss the window with no action taken.

2  –  CSMA-CD 

    Pushing the CONTINUE button will cause the CSMA-CD entity to be deleted.
    Any existing CSMA-CD Stations must be disabled and deleted before you can
    successfully delete the CSMA-CD entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

2.1  –  Station 

    Pushing the CONTINUE button will cause the CSMA-CD Station entity to be
    deleted.  The CSMA-CD Station must be disabled and all ports associated
    with this station must have gone away before you can successfully delete
    this CSMA-CD Station entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

3  –  DDCMP 

    Pushing the CONTINUE button will cause the DDCMP entity to be deleted.
    Any existing DDCMP Link entities must have been disabled and deleted
    before this DDCMP entity can be successfully removed.

    Pushing the CANCEL button will dismiss the window with no action taken.

3.1  –  Link 

    Pushing the CONTINUE button will cause the DDCMP Link entity to be
    deleted.  This DDCMP Link must be disabled, all of its Logical Stations
    must be disabled and deleted, and all ports associated with this link
    must have gone away before you can successfully delete this DDCMP Link
    entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

3.1.1  –  LOGICAL_STATION 

    Pushing the CONTINUE button will cause this DDCMP Link Logical Station
    entity to be deleted.  This DDCMP Link Logical Station must be disabled
    before you can successfully delete it.

    Pushing the CANCEL button will dismiss the window with no action taken.

4  –  evd

4.1  –  outbound_stream 

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Outbound Stream to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.2  –  Relay 

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Relay to be deleted.

    Pushing the CANCEL button will dismiss the window with no action taken.

4.3  –  Sink 

    Pushing the CONTINUE button will cause the specified Event Dispatcher
    Sink to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

5  –  FDDI 

    Pushing the CONTINUE button will cause the FDDI entity to be deleted.
    Any existing FDDI Stations must be disabled and deleted before you can
    successfully delete the FDDI entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

5.1  –  Station 

    Pushing the CONTINUE button will cause the FDDI Station entity to be
    deleted.  The FDDI Station must be disabled and all ports associated
    with this station must have gone away before you can successfully delete
    this FDDI Station entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

6  –  FRAME 

    Pushing the CONTINUE button will cause the FRAME entity to be deleted.
    Any existing FRAME links must be disabled and deleted before you can
    successfully delete the FRAME entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

6.1  –  LINK 

    Pushing the CONTINUE button will cause the FRAME Link entity to be
    deleted.  The FRAME Link must be disabled and all ports associated
    with this Link must have gone away before you can successfully delete
    this FRAME Link entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

7  –  HDLC 

    Pushing the CONTINUE button will cause the HDLC entity to be deleted.
    Any existing HDLC Link entities must have been disabled and deleted
    before this HDLC entity can be successfully deleted.

    Pushing the CANCEL button will dismiss the window with no action taken.

7.1  –  Link 

    Pushing the CONTINUE button will cause the HDLC Link entity to be
    deleted.  This HDLC Link must be disabled, all of its Logical Stations
    must be disabled and deleted, and all ports associated with this link
    must have gone away before you can successfully delete this HDLC Link
    entity.

    Pushing the CANCEL button will dismiss the window with no action taken.

7.1.1  –  LOGICAL_STATION 

    Pushing the CONTINUE button will cause this HDLC Link Logical Station
    entity to be deleted.  This HDLC Link Logical Station must be disabled
    before you can successfully delete it.

    Pushing the CANCEL button will dismiss the window with no action taken.

8  –  MODEM 

    Pushing the CONTINUE button will cause the MODEM Connect entity to be
    deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

8.1  –  Line 

    Pushing the CONTINUE button will cause the MODEM Connect Line entity to be
    deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

9  –  MOP 

    Pushing the CONTINUE button will cause the specified MOP Circuit to be
    deleted from the system.  All MOP Clients must have been deleted, all
    MOP Circuits must have been disabled and deleted, and the MOP entity
    itself must be disabled before you can successfully delete MOP.

    Pushing the CANCEL button will dismiss the window with no action taken.

9.1  –  Circuit 

    Pushing the CONTINUE button will cause the specified MOP Circuit to be
    deleted from the system.  This MOP Circuit must be disabled before you
    can successfully delete it.

    Pushing the CANCEL button will dismiss the window with no action taken.

9.2  –  Client 

    Pushing the CONTINUE button will cause the specified MOP Client to be
    deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

10  –  NSP 

    Pushing the CONTINUE button will cause the NSP Transport to be deleted
    from the system.  NSP must be disabled before you can successfully delete
    it.

    Pushing the CANCEL button will dismiss the window with no action taken.

11  –  osi_transport 

    Pushing the CONTINUE button will cause the OSI Transport to be deleted
    from the system.  OSI must be disabled before you can successfully delete
    it.

    The delete command disconnects the connection if the port direction is
    either incoming or outgoing, and deletes the port. A local transport
    disconnection event will also be generated.

    The port that represents the session control listener (local transport
    selector 'DEC0'H) is a special case and cannot be deleted. An error is
    not returned if an attempt is made to delete the session control listener.

    Pushing the CANCEL button will dismiss the window with no action taken.

11.1  –  Application 

    Pushing the CONTINUE button will cause the selected OSI Transport
    Application entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

11.2  –  Port 

    Pushing the CONTINUE button will cause the specified OSI Transport Port
    to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

11.3  –  Template 

    Pushing the CONTINUE button will cause the specified OSI Transport
    Template to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

12  –  Routing 

    Pushing the CONTINUE button will cause the Routing entity to be deleted
    from the system.  All Routing Circuit entities must have been disabled
    and deleted and the Routing entity itself must be disabled before you can
    successfully delete Routing.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.1  –  Circuit 

    Pushing the CONTINUE button will cause the specified Routing Circuit to
    be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.1.1  –  Adjacency 

    Pushing the CONTINUE button will cause the specified Routing Circuit
    Adjacency entity to be deleted from the system.  You cannot delete an
    automatic adjacency, or an adjacency on a circuit that is not a
    dynamically assigned X.25 circuit.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.1.2  –  ip_address_translation 

    Pushing the CONTINUE button will cause the specified Routing Circuit IP
    Address Translation to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.1.3  –  ip_reachable_address 

    Pushing the CONTINUE button will cause the specified Routing Circuit IP
    Reachable Address to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.1.4  –  reachable_address 

    Pushing the CONTINUE button will cause the specified Routing Circuit
    Reachable Address to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.2  –  egp_group 

    Pushing the CONTINUE button will cause the specified Routing EGP Group
    to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.2.1  –  egp_neighbor 

    Pushing the CONTINUE button will cause the specified Routing EGP Group
    EGP Neighbor to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

12.3  –  permitted_neighbor 

    Pushing the CONTINUE button will cause the specified Routing Permitted
    Neighbor to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

13  –  session

13.1  –  control

13.1.1  –  Application 

    Pushing the CONTINUE button will cause the specified Session Control
    Application to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.2  –  backtranslation_softlink 

    Pushing the CONTINUE button will cause the specified Session Control
    Backtranslation Softlink to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.3  –  Port 

    Pushing the CONTINUE button will cause the specified Session Control
    Port to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.4  –  tower_maintenance 

    Pushing the CONTINUE button will cause the specified Session Control
    Tower Maintenance entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

13.1.5  –  transport_service 

    Pushing the CONTINUE button will cause the specified Session Control
    Transport Service to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14  –  x25_access 

    Pushing the CONTINUE button will cause the X.25 Access entity to be deleted
    from the system.  X.25 Access must be disabled before you can delete it.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.1  –  dte 

    Pushing the CONTINUE button will cause the specified X.25 Access DTE Class
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.2  –  filter 

    Pushing the CONTINUE button will cause the specified X.25 Access Filter
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.3  –  reachable 

    Pushing the CONTINUE button will cause the specified X.25 Access Reachable
    Address entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.4  –  template 

    Pushing the CONTINUE button will cause the specified X.25 Access Template
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.5  –  Security 

    Pushing the CONTINUE button will cause the specified X.25 Access Security
    DTE entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.6  –  app 

    Pushing the CONTINUE button will cause the specified X.25 Access Application
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.6.1  –  rmt 

    Pushing the CONTINUE button will cause the specified X.25 Access Security
    DTE Remote DTE to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

14.7  –  security Flt 

    Pushing the CONTINUE button will cause the specified X.25 Access Security
    Filter entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

15  –  x25_client 

    Pushing the CONTINUE button will cause the X.25 Client entity to be deleted
    from the system.  X.25 Client must be disabled before you can delete it.

    Pushing the CANCEL button will dismiss the window with no action taken.

16  –  x25_relay 

    Pushing the CONTINUE button will cause the X.25 Relay entity to be deleted
    from the system.  X.25 Relay must be disabled before you can delete it.

    Pushing the CANCEL button will dismiss the window with no action taken.

16.1  –  client 

    Pushing the CONTINUE button will cause the specified X.25 Relay Client
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

16.2  –  pvc 

    Pushing the CONTINUE button will cause the specified X.25 Relay PVC entity
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

17  –  x25_server 

    Pushing the CONTINUE button will cause the X.25 Server entity to be
    deleted from the system.  X.25 Server entity must be disabled before you
    can delete it.

    Pushing the CANCEL button will dismiss the window with no action taken.

17.1  –  security 

    Pushing the CONTINUE button will cause the specified X.25 Server Security
    DTE entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

17.2  –  client 

    Pushing the CONTINUE button will cause the specified X.25 Server Client
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

18  –  x25_protocol 

    Pushing the CONTINUE button will cause the X.25 Protocol entity to be
    deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

18.1  –  group 

    Pushing the CONTINUE button will cause the specified X.25 Protocol Group
    Filter entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

18.2  –  dte 

    Pushing the CONTINUE button will cause the specified X.25 Protocol DTE
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.

18.2.1  –  pvc 

    Pushing the CONTINUE button will cause the specified X.25 Protocol DTE PVC
    entity to be deleted from the system.

    Pushing the CANCEL button will dismiss the window with no action taken.
Close Help