show [node node-id] x25 protocol -
dte dte-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
Examples:
show x25 protocol dte * name, call timer
show x25 protocol dte dte-0 all
1 – Characteristics
o call timer
Default: Supplied by profile Value: Bounded by profile
Elapsed time, in seconds, before which a clear packet is sent
for outgoing calls from the DTE that have received no response. A
zero value indicates that no clear is sent.
o ccitt version
Default: 1984 Value: 1-9999
Version of the CCITT X.25 recommendations to which the DTE
conforms.
o clear timer
Default: Supplied by profile Value: Bounded by profile
Value of the retransmit timer for outgoing clear packets from the
DTE. The default value is profile dependent.
o default packet size
Default: 128 Value: 16-4096 raised to the power of 2
Default packet size, in octets, for all virtual circuits on the
DTE. The value must not be less than the value of the minimum
packet size characteristic.
o default window size
Default: 2 Value: 1-127
Default window size for all virtual circuits on the DTE; that
is, the default number of unacknowledged packets. This value
must not be greater than the value of the maximum window size
characteristic, and must not be less than the value of the
minimum window size characteristic.
o description
Manufacturer, product name and version of the hardware platform
of the DTE.
o extended packet sequencing
Default: False Value: True or false
Specifies whether the extended packet sequencing facility is
subscribed to, in which modulo 128 packet numbering is used. If
false, extended packet sequencing is not used. The profile may
provide overriding default or legal values.
o inbound dte class
Default: No DTE class name Value: Simple-name
Name of the DTE class to be associated with all incoming calls to
the DTE. You must specify this characteristic before you enable
the DTE. The x25 access dte class entity to which the name refers
must exist when you enable the DTE.
o incoming list
Default: (0-4095) ranges Value: Set of range (0-4095)
Channel number ranges that define the Logical Channel Numbers
(LCNs) that are available for calls on incoming or bothway
channels. Format the values to specify a set of channel number
ranges. Each channel number is the concatenation of the logical
channel group number and logical channel number of an SVC on the
DTE.
o interface type
Default: DTE Value: See description
Interface mode in which the packet protocol for the DTE will
operate. You can modify this characteristic only when the entity
is disabled.
dce DCE mode.
dte DTE mode.
negotiated The interface mode is negotiated with the other end
to be either DTE or DCE. This value applies only to
point-to-point links.
o interrupt timer
Default: Supplied by profile Value: Bounded by profile
Value of the interrupt timer. This timer is started when an
interrupt packet is sent. If no interrupt confirmation packet
is received before the timer expires, a reset is caused. A zero
value indicates that there is no timer.
o link service provider
Default: No link service provider name Value: Full-name
Name of the link service provider entity used by the DTE. You
must give this characteristic a value before you enable the DTE.
o maximum active circuits
Default: 4096 Value: 1-4096
Maximum number of virtual circuits that can be active at any time
on the DTE. This characteristic cannot be set.
o maximum clear attempts
Default: Supplied by profile Value: Bounded by profile
Number of times that sending a clear packet can be attempted on
a virtual circuit on the DTE. The value 1 indicates that a clear
packet is sent only once; that is, there are no retries.
o maximum packet size
Default: 128 Value: 16-4096 raised to the power of 2
Maximum packet size, in octets, for all virtual circuits on the
DTE. This value must be greater than or equal to the value of the
minimum packet size and default packet size characteristics.
o maximum reset attempts
Default: Supplied by profile Value: Bounded by profile
Number of times the DTE attempts to send a reset packet. The
value 1 indicates that a reset packet is sent only once; that is,
there are no retries.
o maximum restart attempts
Default: Supplied by profile Value: Bounded by profile
Number of times that any virtual circuit on the DTE attempts
to send a restart packet. The value 1 indicates that a restart
packet is sent only once; that is, there are no retries.
o maximum throughput class
Default: 4800 Value: See description
Maximum value for the throughput class (65535) of any virtual
circuit on the DTE. The value specified must be one of the
following: 0, 75, 150, 300, 600, 1200, 2400, 4800, 9600, 48000,
or 64000. The value must be greater than or equal to the value of
the minimum throughput class characteristic.
o maximum window size
Default: 2 Value: 1-127
Maximum number of unacknowledged packets for all virtual
circuits on the DTE. This value must be greater than or equal
to the value of the minimum window size and default window size
characteristics.
o minimum packet size
Default: 128 Value: 16-4096 raised to the power of 2
Minimum packet size, in octets, for all virtual circuits on the
DTE. This value must be less than or equal to the value of the
maximum packet size and default packet size characteristics.
o minimum throughput class
Default: Supplied by profile Value: Bounded by profile
Minimum throughput class for any virtual circuit on the DTE. The
value specified must be one of the following: 0, 75, 150, 300,
600, 1200, 2400, 4800, 9600, 48000, or 64000. The value must be
less than or equal to the value of the maximum throughput class
characteristic.
o minimum window size
Default: 2 Value: 1-127
Minimum window size for all virtual circuits on the DTE. This
value must be less than or equal to the value of the maximum
window size characteristic.
o outgoing list
Default: [1...4095] Value: Set of range (0-4095)
Channel number ranges that define the LCNs that are available
for calls on outgoing or two-way channels. Format the values to
specify a set of channel number ranges. Each channel number is
the concatenation of the logical channel group number and logical
channel number of an SVC on the DTE.
o profile
Default: No profile name
Name of the profile that provides subscription details of the
PSDN to which the DTE is connected. This characteristic cannot be
set, it is specified when the DTE is created.
o reset timer
Default: Supplied by profile Value: Bounded by profile
Value of the retransmit timer for outgoing reset packets from the
DTE. The default value is profile-dependent.
o restart timer
Default: Supplied by profile Value: Bounded by profile
Value of the retransmit timer for outgoing restart packets from
the DTE. The default value is profile dependent.
o segment size
Segment size specified for data sent at this DTE.
o x25 address
Default: No DTE address Value: DTE-address
Full address of the DTE. You must give this characteristic a
value before you enable the DTE.
2 – Counters
o allocated pvc failures (OpenVMS)
Number of times allocated PVCs have failed.
o calls failed
Number of outgoing or incoming calls on the DTE that were either
rejected or were disconnected during the data phase.
o creation time
Time at which this entity was created.
o data octets received
Number of data octets received on all virtual circuits on the
DTE.
o data octets sent
Number of data octets sent on all virtual circuits on the DTE.
o data PDUs received
Number of data packets received on all virtual circuits on the
DTE.
o data PDUs sent
Number of data packets sent on all virtual circuits from the DTE.
o diagnostic packets
Number of diagnostic packets received on all virtual circuits on
the DTE.
o down transitions
Number of times the status attribute state has changed from on to
off, synchronizing, or unsynchronized.
o fast selects received
Number of Fast Select requests received at the DTE.
o fast selects sent
Number of Fast Select requests sent from the DTE.
o illegal packets
Number of illegal packets received at the DTE.
o incoming calls connected
Number of successful call requests received at the DTE.
o locally initiated resets
Number of times a reset was initiated by the local X.25 Protocol
module.
o locally initiated restarts
Number of times a restart was initiated by the local X.25
Protocol module.
o network initiated resets
Number of times a reset was received.
o network initiated restarts
Number of times a restart was received.
o outgoing calls connected
Number of successful call requests sent from the DTE.
o protocol errors
Number of protocol errors detected at the DTE.
o reject packets
Number of reject packets received at the DTE.
o retry failures
One of the maximum retry counts has been reached.
o up transitions
Number of times the status attribute state has changed from off,
synchronizing, or unsynchronized to on.
3 – Identifier
o name
Simple name assigned to the DTE when it is created.
4 – Status
o available outgoing channels
Number of LCNs enumerated by the outgoing list characteristic
that are available for use.
o dte class
DTE classes to which the DTE belongs.
o interface mode
Mode in which the DTE is operating.
o groups
Groups to which the DTE belongs.
o state
Status of the x25 protocol dte entity.
off The DTE is disabled, and all virtual circuits are
terminated.
running The DTE is enabled and synchronized at Protocol
layer 3.
synchronizing A restart operation initiated at the packet level
is in progress.
unsynchronized The line between the DTE and DCE is not
synchronized at Protocol layer 2.
o last state change
Time at which the last change of state occurred.
o uid
Entity's unique identifier, which is generated when the entity is
created.
5 – pvc
show [node node-id] x25 protocol -
dte dte-name -
pvc pvc-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
Examples:
show x25 protocol dte dte-1 pvc * name, channel
show x25 protocol dte dte-1 pvc PVC-1 all
5.1 – Characteristics
o acl
Default: No access Value: Access-control-list
control list
Access control list that controls access to this PVC.
o channel
Default: No default Value: 0-4095
Concatenated logical channel group and logical channel number
for the PVC. The value of this characteristic derives from an
argument to the create command.
o packet size
Default: No default Value: 16-4096
Packet size for the PVC, in octets. The value must be a power
of 2 in the range 16 to 4096. The value of this characteristic
derives from an argument to the create command.
o window size
Default: No default Value: 1-127
Window size for the PVC. The value of this characteristic derives
from an argument to the create command.
5.2 – Counters
These counters record values over the lifetime of a PVC. For
counters that refer to use of the PVC by individual clients, see
the x25 access port entity.
o accesses blocked
Number of times an attempt to open a PVC has failed because of
security.
o creation time
Time at which this entity was created.
o data octets received
Number of octets received by the PVC since it was created.
o data octets sent
Number of octets sent by the PVC since it was created.
o data pdus received
Number of data PDUs received by the PVC since it was created.
o data pdus sent
Number of data PDUs sent by the PVC since it was created.
o pvc failures
Number of times the PVC has failed while the entity has been
allocated.
5.3 – Identifier
o name
Simple name assigned to the PVC when it is created.
5.4 – Status
o allocated
True if the PVC is allocated to a user. False if otherwise.
o port
X25 Access port with which the PVC is associated.
o uid
Entity's unique identifier, which is generated when the entity is
created.