show [node node-id] llc2 -
sap simple-name -
link simple-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
Examples:
show llc2 sap sap-0 link * name, state
show llc2 sap sap-0 link dte-1 all
1 – Characteristics
o acknowledge timer
Default: 1000 Value: 1-60000
Time, in milliseconds, that the link waits for an
acknowledgment before initiating recovery action. The granularity
of this timer is 10 milliseconds. Values that are not multiples of
10 are rounded up.
o busy timer
Default: 10000 Value: 1-60000
Time, in milliseconds, that the link waits for indication
of the clearance of a busy condition at the remote station.
The granularity of this timer is 10 milliseconds. Values that are
not multiples of 10 are rounded up.
o holdback timer
Default: 500 Value: 0-60000
Delay, in milliseconds, before an acknowledgment
must be sent. The granularity of this timer is 10 milliseconds.
Values that are not multiples of 10 are rounded down.
o local receive window size
Default: 127 Value: 1-127
Window size used by the link for receiving frames.
o maximum data size
Default: 1028 Value: 1-65531
Largest frame size, in octets, the link can use to
send or receive data. This value does not include the size of the
frame header.
o poll timer
Default: 1000 Value: 1-60000
Time, in milliseconds, the link waits for a response
with the F bit set. The granularity of this timer is
10 milliseconds. Values that are not multiples of 10
are rounded up.
o reject timer
Default: 3000 Value: 1-60000
Time, in milliseconds, the link waits for a reply to
a REJ (reject) frame. The granularity of this timer is
10 milliseconds. Values that are not multiples of 10
are rounded up.
o remote lsap address
Default: 7E Value: Hex-number
Address of the destination LSAP (local service access point) to be
used by the link. The lowest significant bit must be clear; the
specified address must be an individual address.
o remote mac address
Default: 00-00-00-00-00-00 Value: LAN-address
Specifies the destination MAC address to be used by the link.
The lowest significant bit of the first octet must be clear;
that is, the address must be an individual address.
o retry maximum
Default: 10 Value: 1-255
Maximum number of times the link retransmits a frame
before assuming a fatal error and taking more drastic recovery
action.
2 – Counters
o acknowledge timer expirations
Specifies the number of times the local acknowledge timer has
expired.
o busy timer expirations
Specifies the number of times the local busy timer has expired.
o creation time
Specifies the time the entity was created.
o data pdus received
Specifies the number of I frames and UI frames received from
the remote end of the link. This value does not include
retransmissions.
o data pdus sent
Specifies the number of I frames and UI frames transmitted
to the remote end of the link. This value does not include
retransmissions.
o data octets received
Specifies the number of data octets received in I frames and
UI frames from the remote end of the link. This value does not
include data octets in retransmissions.
o data octets sent
Specifies the number of data octets transmitted in I frames and UI
frames to the remote end of the link. This value does not include
data octets in retransmissions.
o frmrs received
Specifies the number of FRMR (frame reject) frames received.
o frmrs sent
Specifies the number of FRMR (frame reject) frames generated as a
result of invalid incoming frames.
o polls received
Specifies the number of command frames received with the P bit
set.
o poll timer expirations
Specifies the number of times the local poll timer has expired.
o reject timer expirations
Specifies the number of times the local reject timer has expired.
o rejs received
Specifies the number of REJ (reject) frames received.
o rejs sent
Specifies the number of REJ (reject) frames transmitted.
o rnrs received
Specifies the number of RNR (receive not ready) frames received.
o rnrs sent
Specifies the number of RNR (receive not ready) frames
transmitted.
o times link changed state
Specifies the number of times the link's status attribute state
changed from On to Off, or from Off to On.
o times link halted
Specifies the number of times the link's status attribute protocol
state was set to Halted.
o times link initializing
Specifies the number of times the link's status attribute protocol
state was set to Initializing.
o times link inoperative
Specifies the number of times the link's status attribute protocol
state was set to Inoperative.
o times link resetting
Specifies the number of times the link's status attribute protocol
state was set to Resetting.
o times link running
Specifies the number of times the link's status attribute protocol
state was set to Running. When the link enters the Running state,
the protocol has been successfully initialized or reset.
o times link setup failed
Specifies the number of times the llc2 protocol fails to
initialize correctly after the maximum number of retries.
o xids received
Specifies the number of XID frames received.
o xids sent
Specifies the number of XID frames transmitted.
3 – Identifiers
o name
Specifies the simple-name assigned to the link when it is created.
4 – Status
o protocol state
Specifies the state of the llc2 protocol with respect to the
remote station.
error The protocol is in a recognized error state.
halted The protocol has halted.
initializing The protocol is being initialized.
inoperative The protocol cannot be started because the LAN
station cannot provide a connection to a remote
system.
resetting The protocol is being reset.
running The protocol is running normally.
o remote llc class
Specifies the class of the remote llc.
1 Class 1 llc. Only type 1 operation is supported.
2 Class 2 llc. Both type 1 and type 2 operation are
supported.
unknown The class has not yet been established. The class is
not established until xid frames have been exchanged
between the local and remote llc implementations.
o remote receive window size
Specifies the window size used by the remote station for receiving
frames. The local station uses this value as its window for
transmitting frames.
o state
Specifies the state of the llc2 link entity.
off The link is disabled.
on The link is enabled.
o uid
Specifies the entity's unique identifier that is generated when
the entity is created.