An instance of the SAP subentity must exist for each LLC2 port.
   The SAP (service access point) subentity is the access point to the
   underlying LAN station. There is one SAP for each protocol on the
   LAN adapter.

1  –  create

   create llc2 sap

   The create llc2 sap command creates an instance of the LLC2 SAP
   subentity for each protocol that LLC2 uses. The create command also
   allocates resources for the subentity and sets its characteristics
   to their default values.

   Ex,   ncl> create llc2 sap sna-0

2  –  delete

   delete llc2 sap

   The delete llc2 sap command deletes a named LLC2 SAP instance.
   You can delete a SAP instance only when it has no active Link
   subentities and it is disabled.

   Ex,   ncl> delete llc2 sap sna-0

3  –  disable

   disable llc2 sap

   The disable llc2 sap command disables a named LLC2 SAP instance.

   Ex,   ncl> disable llc2 sap sna-0

4  –  enable

   enable llc2 sap

   The enable llc2 sap command enables a named LLC2 SAP instance.

   Ex,   ncl> enable llc2 sap sna-0

5  –  set

   set llc2 sap

   The set llc2 sap command lets you set the attributes for the
   LLC2 SAP subentity.

   Ex,   ncl> set llc2 sap sna-0 lan station token ring station trn-0

5.1  –  Characteristics

   LAN Station     Local entity    Specifies the name of the LAN station
                                   entity used by the name SAP. You must
                                   specify this value before trying to
                                   enable the SAP.

   Local LSAP      2 characters    Specifies the local link service
   Address         (hexadecimal)   access point (LSAP) to be
                                   used. The address must be unique.

                                   For use with the Peer Server, this
                                   value is normally set to 04.

6  –  show

   show llc2 sap

   The show llc2 sap command displays the attributes for the LLC2 SAP
   subentity.

   Ex,   ncl> show llc2 sap sna-0 all

6.1  –  Identifier

   Name          Displays the simplename assigned when the LLC2 SAP was
                 created.

6.2  –  Status

   State         Displays the entity state of the LLC2 SAP entity.
                 Possible values are:

         off     The SAP is disabled.

         on      The SAP is enabled.

   LAN Port      Displays the name of the LAN Port that is
                 opened and enabled when this SAP is successfully
                 enabled.  The status has a null value if the SAP
                 is not enabled.

   Maximum PDU   Displays the largest frame size, in octets, that
   Size          can be used to send or receive data on this SAP.

   UID           Displays the entity's unique identifier that was
                 assigned when the entity was created.

6.3  –  Characteristics

   LAN Station     Local entity    Displays the name of the LAN station
                                   entity used by the name SAP. You must
                                   specify this value before trying to
                                   enable the SAP.

   Local LSAP      2 characters    Displays the local link service
   Address         (hexadecimal)   access point (LSAP) to be used.

6.4  –  Counters

   Creation        Displays the time that the entity was created.
   Time

   Times SAP       Displays the number of times the SAP state has
   State Changed   changed from on to off, or from off to on.