MSA_UTIL_HELP.HLB  —  SET  UNIT  Qualifiers  /RAID_LEVEL
            Specifies the RAID type of the UNIT. The supported values for
            this qualifier are 0, 1, 5, 50, and 60.

            - RAID 0 is Data Striping
            - RAID 1 is Disk Mirroring
            - RAID 5 is Data Striping with Striped Parity
 	   - RAID 50 is Data Striping across RAID 5 arrays
            - RAID 60 is Data Striping across RAID 6 arrays

            Note: /RAID_LEVEL should be used only in conjunction
                  with the /MIGRATE qualifier.

            Format:
                    /RAID=[(0 | 1 | 5 | 50 |60)]
Close Help