MSA_UTIL_HELP.HLB  —  ADD  UNIT  Qualifiers  /RAID_LEVEL
         Specifies the RAID type of the UNIT. The support values for this
         qualifier are 0, 1, 5, 50, and 60.

         -  RAID 0 is Data Striping
         -  RAID 1 is Disk Mirroring
         -  RAID 5 is Data Striping with Striped Parity
 	-  RAID 50 is Data Striping across RAID 5 arrays
 	-  RAID 60 is Data Striping across RAID 6 arrays

         Format:
                 /RAID=[(0 | 1 | 5 | 50 | 60)]

        Note:

        - When minimum four disks are supplied to create a RAID 1 unit,
          the controller creates a RAID 10 unit; which is Data Striping
          across RAID 1 arrays.

        - SHOW UNITS displays "Logical Volume Raid Level: RAID 1" for the
          RAID 10 units. If the data disks used by logical unit number (LUN)
          are more than two disks, the implementation of that LUN is
          RAID 10.
Close Help