LANCP$HELP.HLB  —  SET  DEVICE  Examples
  1. LANCP> SET DEVICE/CONTENDER/MEDIA=UTP/NOEARLY/SOURCE ICA0

    Enables monitor contention, UTP cable media, source routing and
    disables early token release for Token Ring device ICA0.

  2. LANCP> SET DEVICE/MEDIA=TWI EWB0

    Sets the media type to twisted pair for the second Tulip Ethernet
    device, EWB0.

  3. LANCP> SET DEVICE EXA0/DLL=ENABLE

    Enables MOP downline load service for device EXA0, leaving the
    remaining MOPDLL parameters unchanged.

  4. LANCP> SET DEVICE EXA0/DLL=(ENABLE,EXCLUSIVE,SIZE=1482)

    Enables MOP downline load service for device EXA0, in exclusive
    mode with the data transfer size of 1482 bytes, leaving the
    remaining MOPDLL parameters unchanged.

  5. LANCP> SET DEVICE EXA0/DLL=(ENABLE,NOEXCLUSIVE)
  LANCP> SET DEVICE FXA0/DLL=(ENABLE,EXCL,KNOWN)

    These commands enable LANACP MOP downline load service for:

    o  LAN device EXA0 in nonexclusive mode

    o  LAN device FXB0 in exclusive mode for only known clients
Close Help