LANCP$HELP.HLB  —  SHOW

1  –  ACP

    Displays the current settings for LANCP and LANACP.

    Format

      SHOW ACP

1.1  –  Parameters

    None.

1.2  –  Qualifiers

1.2.1    /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to it.

1.3  –  Example

  LANCP> SHOW ACP
  LANCP/LANACP options:
    Verify is OFF
    OPCOM messages are ENABLED
    DLL packet tracing is DISABLED

      This example shows how LANCP and LANACP are currently
      configured.

2  –  CONFIGURATION

    Displays a list of LAN devices and characteristics on the system.

    Format

      SHOW CONFIGURATION

2.1  –  Parameters

    None.

2.2  –  Qualifiers

2.2.1    /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to it.

2.2.2    /USERS

    Shows which protocols are using which template device.

3  –  DEVICE

    Displays information in the volatile device database. If the
    LANACP process is not running, displays a list of current LAN
    devices.

    Format

      SHOW DEVICE  device-name

3.1  –  Parameter

 device-name

    Supplies the LAN controller device name. The device name has
    the form ddcu where dd is the device code, c is the controller
    designation, and u is the unit number. LAN devices are specified
    as the name of the template device which is unit 0. For example,
    the first DE435 Ethernet device is specified as EWA0, the second
    as EWB0.

    For example, you can specify a DEMNA controller as EXA, EXA0,
    or EXA0:. This refers to the LAN template device, for which is
    maintained most of the device parameters and counters. Also,
    the device name can refer to a device unit representing an
    actual user or protocol. For example, the cluster protocol can
    be started on a device as EWA1. You can specify specific device
    units to view unit-specific parameter information.

    If you do not specify a device name, all devices are displayed.

    If you specify a device name, all matching LAN devices are
    displayed, for example: E to select all Ethernet devices, F
    for FDDI, I for Token Ring, EW to select all Ethernet PCI Tulip
    devices.

                                   NOTE

       If you do not specify a qualifier, the utility displays the
       matching devices without additional information.

3.2  –  Qualifiers

3.2.1    /ALL

    Shows all devices that match device name.

3.2.2    /CHARACTERISTICS

       /CHARACTERISTICS or PARAMETERS

    Displays status and related information about the device.

3.2.3    /CLEAR_COUNTERS

    Clears device counters and internal driver counters after a
    SHOW DEVICE/COUNTERS or SHOW DEVICE/INTERNAL_COUNTERS command.
    Subsequent SHOW commands show the counter values accumulated
    since the clear was done.

    This affects counters displayed by LANCP only.

    See the /RESTORE_COUNTERS to restore counters to the original
    values.

3.2.4    /COUNTERS

    Displays device counters.

3.2.5    /DLL

       /DLL or MOPDLL

    Displays LAN volatile device database information related to MOP
    downline load for the device.

3.2.6    /INTERNAL_COUNTERS

    Displays internal counters. By default, it does not display zero
    counters. To see all counters, including zero, use the additional
    qualifier /ZERO. To see the debug counters, use the additional
    qualifier /DEBUG.

3.2.7    /MAP

    Displays the current configuration of the functional address
    mapping table.

3.2.8    /MESSAGES

    Displays the console messages displayed by the LAN driver as part
    of the LAN driver internal counters. This qualifier is included
    for convenience, to avoid scanning the internal counters to get
    to the message data.

3.2.9    /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to it.

3.2.10    /RESTORE_COUNTERS

    Restores device counters and internal driver counters prior to
    a SHOW DEVICE/COUNTERS or SHOW DEVICE/INTERNAL_COUNTERS command.

    See the /CLEAR_COUNTERS to clear the counters.

3.2.11    /REVISION

    Displays the current LAN driver and device revision information,
    if available or applicable. Not all LAN drivers maintain revision
    information.

3.2.12    /SR_ENTRY

    Displays the contents of the current Token Ring source routing
    cache table.

3.2.13    /TRACE

    Displays LAN driver trace data.

3.2.14    /VLAN

    Displays a list of IEEE 802.1Q tags that are configured on the
    switch port connected to the specified physical LAN device.
    LANCP listens for the GVRP packets that contain the configuration
    information and displays the configured tags.

    The switch periodically sends GVRP (GARP VLAN Registration
    Protocol) (GARP = Generic Attribute Registration Protocol)
    packets to provide VLAN configuration information in compliance
    with the IEEE 802.1Q specification. If GVRP is not configured on
    the switch, or if the LAN device is not connected to a switch,
    this command displays only the list of tags that the VLAN driver
    has configured.

3.3  –  Examples

    1.LANCP> SHOW DEVICE/COUNTERS EXA0

      Device Counters EXA0:
                   Value  Counter
                   -----  -------
                  259225  Seconds since last zeroed
                 5890496  Data blocks received
                 4801439  Multicast blocks received
                  131074  Receive failure
               764348985  Bytes received
               543019961  Multicast bytes received
                       3  Data overrun
                 1533610  Data blocks sent
                  115568  Multicast packets transmitted
                  122578  Blocks sent, multiple collisions
                   86000  Blocks sent, single collision
                  189039  Blocks sent, initially deferred
               198120720  Bytes sent
                13232578  Multicast bytes transmitted
                 7274529  Send failure
                       0  Collision detect check failure
                       0  Unrecognized frame destination
                       0  System buffer unavailable
                       0  User buffer unavailable

      This command displays counters for Ethernet device EXA0.

    2.LANCP> SHOW DEVICE/MAP ICA0

      Multicast to Functional Address Mapping ICA0:
         Multicast address   Functional Address   Bit-Reversed
         -----------------   ------------------   ------------
         09-00-2B-00-00-04   03-00-00-00-02-00    C0:00:00:00:40:00
         09-00-2B-00-00-05   03-00-00-00-01-00    C0:00:00:00:80:00
         CF-00-00-00-00-00   03-00-00-08-00-00    C0:00:00:10:00:00
         AB-00-00-01-00-00   03-00-02-00-00-00    C0:00:40:00:00:00
         AB-00-00-02-00-00   03-00-04-00-00-00    C0:00:20:00:00:00
         AB-00-00-03-00-00   03-00-08-00-00-00    C0:00:10:00:00:00
         09-00-2B-02-00-00   03-00-08-00-00-00    C0:00:10:00:00:00
         09-00-2B-02-01-0A   03-00-08-00-00-00    C0:00:10:00:00:00
         AB-00-00-04-00-00   03-00-10-00-00-00    C0:00:08:00:00:00
         09-00-2B-02-01-0B   03-00-10-00-00-00    C0:00:08:00:00:00
         09-00-2B-00-00-07   03-00-20-00-00-00    C0:00:04:00:00:00
         09-00-2B-00-00-0F   03-00-40-00-00-00    C0:00:02:00:00:00
         09-00-2B-02-01-04   03-00-80-00-00-00    C0:00:01:00:00:00
         09-00-2B-02-01-07   03-00-00-02-00-00    C0:00:00:40:00:00
         09-00-2B-04-00-00   03-00-00-04-00-00    C0:00:00:20:00:00
         09-00-2B-02-01-00   03-00-00-00-08-00    C0:00:00:00:10:00
         09-00-2B-02-01-01   03-00-00-00-10-00    C0:00:00:00:08:00
         09-00-2B-02-01-02   03-00-00-00-20-00    C0:00:00:00:04:00
         03-00-00-00-00-01   03-00-00-00-00-01    C0:00:00:00:00:80
         03-00-02-00-00-00   03-00-02-00-00-00    C0:00:40:00:00:00

      This command displays mapping information for Token Ring device
      ICA0.

    3.LANCP> SHOW DEVICE/DLL

      Device Listing, volatile database:
                 --- MOP Downline Load Service Characteristics ---
      Device     State   Access Mode      Clients           Data Size
      ------     -----   -----------      -------           ---------
      EXA0      Enabled  Exclusive    KnownClientsOnly      1400 bytes
      FXA0      Disabled NoExclusive  NoKnownClientsOnly     246 bytes

      This command displays MOP downline load information in the LAN
      volatile device database for all known devices.

    4.LANCP> SHOW DEVICE/DLL EXA0

      Device Listing, volatile database:
                 --- MOP Downline Load Service Characteristics ---
      Device     State   Access Mode      Clients           Data Size
      ------     -----   -----------      -------           ---------
      EXA0      Enabled  Exclusive    KnownClientsOnly      1400 bytes

      This command displays MOP downline load information in the LAN
      volatile device database for device EXA0.

    5.LANCP> SHOW DEVICE/PARAMETERS IRA0

      Device Parameters IRA0:
                   Value  Parameter
                   -----  ---------
                  Normal  Controller mode
                External  Internal loopback mode
       00-00-93-58-5D-32  Hardware LAN address
              Token Ring  Communication medium
                 Enabled  Functional address mode
                      No  Full duplex enable
                      No  Full duplex operational
                      16  Line speed (megabits/second)
                 16 Mbps  Ring speed
                     STP  Line media
                 Enabled  Early token release
                Disabled  Monitor contender
                     200  SR cache entries
                       2  SR discovery timer
                      60  SR Aging Timer
                 Enabled  Source routing
                       3  Authorized access priority
       AA-00-04-00-92-FF  Upstream neighbor
                       0  Ring number

      This command displays status and parameters information for
      Token ring device IRA0.

    6.LANCP> SHOW DEVICE/REVISION EWF0
      Device Revisions EWF0:
                        Value  Component
                        -----  ---------
                     02000041  Device hardware revision
            08020110 00000004  Port driver revision
            08020172 00000001  LAN common routines revision

      This command displays revision information for Ethernet device
      EWF0:.

    7.LANCP> SHOW DEVICE/SR_ENTRY ICA0

      Source Routing Cache Table ICA0:
         LAN address      State    XmtTmo   RcvTmo  StaleTmo DiscvTmo
      -----------------   -----   -------- -------- -------- --------
      AA-00-04-00-92-FF   LOCAL   00000028 00000028 00000245 00000000

      This command displays source routing entry information for
      Token Ring device ICA0.

4  –  DLL

    Displays the current state of MOP downline load services for the
    system, including devices for which MOP loading is enabled and
    counters information.

    Format

      SHOW DLL or MOPDLL

4.1  –  Parameters

    None.

4.2  –  Qualifier

4.2.1    /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to it.

4.2.2  –  Example

  LANCP>SHOW DLL

  LAN DLL Status:
   EXA enabled in exclusive mode for known nodes only,
         data size 1482 bytes
   FXA disabled

         #Loads  Packets    Bytes     Last load time     Last loaded
         ------  -------    -----  --------------------  ------------
   EXA      5     1675    4400620  22-SEP-2002 10:27.51    GALAXY
   FXA      0        0          0

      On this node, there are two LAN devices, EXA (DEMNA) and
      FXA (DEMFA). MOP downline load service is enabled on EXA in
      exclusive mode.

      Requests are answered only for nodes that are defined in the
      LANACP node database. The image data size in the load messages
      is 1482 bytes. There have been five downline loads, the last
      one occurring on node GALAXY at 10:27. Finally, there are no
      recorded downline loads for FXA, which is currently disabled
      for downline load service.

5  –  LOG

    Displays recent downline load activity (the last 2048 bytes of
    log data written to the log file SYS$MANAGER:LAN$ACP.LOG).

    Format

      SHOW LOG

5.1  –  Parameters

    None.

5.2  –  Qualifier

5.2.1    /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to it.

5.3  –  Example

  LANCP> SHOW LOG

      This command displays the last 2048 bytes of log data written
      to the log file SYS$MANAGER:LAN$ACP.LOG.

6  –  NODE

    Displays information in the LAN volatile node database.

    Format

      SHOW NODE  node-name

6.1  –  Parameter

 node-name

    Specifies the name of a node in the LAN volatile node database.
    The name can include up to 63 characters associated with the
    node address. If you do not specify a node name, all nodes are
    displayed.

6.2  –  Qualifiers

6.2.1    /ALL

    Displays information for all nodes in the LAN volatile node
    database. If you specify a node name, all matching nodes are
    selected; for example, A/ALL selects all nodes beginning with A.

6.2.2    /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to that file. If
    the file extension is .com, the output is in the form of a list
    of DEFINE NODE or SET NODE commands. The resulting command file
    can be used to create the LAN node databases.

6.2.3    /TOTAL

    Display counter totals only, for the nodes selected.

6.3  –  Examples

    1.LANCP> SHOW NODE

      Node Listing:

      GALAXY (08-00-2B-2C-51-28):
       MOP DLL: Load file: APB.EXE
                Load root: $64$DIA24:<SYS11.>
                Boot type: Alpha satellite

      ZAPNOT (08-00-2B-18-7E-33):
       MOP DLL: Load file: NISCS_LOAD.EXE
                Load root: LAVC$SYSDEVICE:<SYS10.>
                Boot type: VAX satellite

      CALPAL (08-00-2B-08-9F-4C):
       MOP DLL: Load file: READ_ADDR.SYS
                Last file: LAN$DLL:APB_X5WN.SYS
                Boot type: Other
                2 loads requested, 1 volunteered
                1 succeeded, 0 failed
                Last request was for a system image, in MOP V4 format
                Last load initiated 10-JUN-1998 09:11:17
                    on EXA0 for 00:00:06.65
                527665 bytes, 4161 packets, 0 transmit failures

      Unnamed (00-00-00-00-00-00):

      Totals:
        Requests received    2
        Requests volunteered 1
        Successful loads     1
        Failed loads         0
        Packets sent         2080
        Packets received     2081
        Bytes sent           523481
        Bytes received       4184
        Last load            CALPAL at 10-JUN-1998 09:11:17.29

      This example shows output from a command issued on a local node
      on which there are three nodes defined (GALAXY, ZAPNOT, and
      CALPAL). CALPAL has issued two load requests:

      o  The first request is the multicast request from CALPAL that
         the local node volunteered to accept.

      o  The second request is the load request sent directly to the
         local node by CALPAL for the actual load data. The elapsed
         time from the second load request to completion of the load
         was 6.65 seconds.

    2.LANCP> SHOW NODE VAXSYS

      Displays node characteristics and counters information from the
      LAN volatile node database for node VAXSYS.

    3.LANCP> SHOW NODE/ALL VAX

      Displays node characteristics and counters information from the
      LAN volatile node database for all nodes whose name begins with
      VAX.

    4.LANCP> SHOW NODE/ALL

      Displays node characteristics and counters information from the
      LAN volatile node database for all nodes.

    5.LANCP> SHOW NODE/ALL/OUTPUT=TMP.INI

      Writes a list of all nodes to the file TMP.INI.
Close Help