1.LANCP> SHOW NODE

      Node Listing:

      GALAXY (08-00-2B-2C-51-28):
       MOP DLL: Load file: APB.EXE
                Load root: $64$DIA24:<SYS11.>
                Boot type: Alpha satellite

      CALPAL (08-00-2B-08-9F-4C):
       MOP DLL: Load file: READ_ADDR.SYS
                Last file: LAN$DLL:APB_X5WN.SYS
                Boot type: Other
                2 loads requested, 1 volunteered
                1 succeeded, 0 failed
                Last request was for a system image, in MOP V4 format
                Last load initiated 10-JUN-1998 09:11:17
                    on EXA0 for 00:00:06.65
                527665 bytes, 4161 packets, 0 transmit failures

      Unnamed (00-00-00-00-00-00):

      Totals:
        Requests received    2
        Requests volunteered 1
        Successful loads     1
        Failed loads         0
        Packets sent         2080
        Packets received     2081
        Bytes sent           523481
        Bytes received       4184
        Last load            CALPAL at 10-JUN-1998 09:11:17.29

      This example shows output from a command issued on a local node
      on which there are three nodes defined (GALAXY and CALPAL).
      CALPAL has issued two load requests:

      o  The first request is the multicast request from CALPAL that
         the local node volunteered to accept.

      o  The second request is the load request sent directly to the
         local node by CALPAL for the actual load data. The elapsed
         time from the second load request to completion of the load
         was 6.65 seconds.

    2.LANCP> SHOW NODE VAXSYS

      Displays node characteristics and counters information from the
      LAN volatile node database for node VAXSYS.

    3.LANCP> SHOW NODE/ALL VAX

      Displays node characteristics and counters information from the
      LAN volatile node database for all nodes whose name begins with
      VAX.

    4.LANCP> SHOW NODE/ALL

      Displays node characteristics and counters information from the
      LAN volatile node database for all nodes.

    5.LANCP> SHOW NODE/ALL/OUTPUT=TMP.INI

      Writes a list of all nodes to the file TMP.INI.