1 /BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
2 /CHECK_ONLY
Concludes the action of the command after performing file
conflict detection, searching the destination device for all
files listed in the product description file, and displaying file
lookup summary data. This option allows you to perform a "dry
run" of the registration operation without modifying the product
database.
3 /DESTINATION
/DESTINATION=device-name:[directory-name]
Specifies the top-level directory where the product to be
registered resides. If you omit the device name, the utility uses
your current default device. If you omit the directory name, the
utility uses [VMS$COMMON] as the default directory.
If you do not use this qualifier to specify a destination,
the utility uses the location defined by logical name
PCSI$DESTINATION. If this logical name is not defined, the
utility registers the software in SYS$SYSDEVICE:[VMS$COMMON], the
default top-level directory for software product files.
4 /KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
TRANSITION Used to register information about
a product that is installed but not
recorded in the product database
(for example, a product installed by
VMSINSTAL). This kit does not provide
product material.
5 /LOG
/LOG
/NOLOG (default)
Displays the file specifications of the product files and
directories that are registered in the product database.
6 /OPTIONS
/OPTIONS=keyword
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
The NOVALIDATE_KIT and SIGNED_KIT keywords are
mutually exclusive.
REGISTER_ALL_ Registers all files listed in the product
FILES description file of the kit, even if they are
not currently present on the destination device.
SIGNED_KIT Requires all software product kits selected for
the operation to be signed kits that have passed
validation; otherwise, the operation is not
performed.
The SIGNED_KIT and NOVALIDATE_KIT keywords are
mutually exclusive.
7 /PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
8 /REMARK
/REMARK=string
Records a comment in the product database about the task you
are performing. The PRODUCT SHOW HISTORY command displays the
recorded comments. For each product, PCSI stores a chronological
list of tasks you perform and the associated remarks. The default
behavior is that no remark is recorded.
9 /REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
10 /SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
11 /SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
12 /VERSION
/VERSION=version-number
Selects software products that have the specified version.