Modifies the configuration of an installed product by allowing a
user to change installation options.
Format
PRODUCT RECONFIGURE product-name[,...] [/qualifiers]
1 – Description
Reconfiguration of a product might result in the addition or
deletion of files, or both, depending on the user's selection
or deselection of options; that is, users can select options
that were not selected when the product was installed, or they
can deselect options that were selected when the product was
installed. At the conclusion of the operation, the product
database is updated to reflect the changes.
Access to the original software product kit that was used to
install the product is required to perform the reconfigure
operation.
2 – Parameter
product-name
Names the product, or list of products, to reconfigure.
3 – Qualifiers
3.1 /BASE_SYSTEM
/BASE_SYSTEM=base-system-name
Selects software products whose base system matches the one
specified. The base system name identifies both a hardware
platform and an operating system. Standard names are:
Name Description
AXPVMS Denotes an OpenVMS Alpha product.
I64VMS Denotes an OpenVMS I64 product.
VAXVMS Denotes an OpenVMS VAX product.
VMS Indicates a product that can be installed on more
than one OpenVMS platform.
3.2 /CONFIGURATION
/CONFIGURATION=(keyword[,...])
Specifies how the configuration choices are used. Keywords are:
CURRENT Uses values from the product database. These
values are the configuration choices made when
the product was installed or reconfigured.
PRODUCER Uses values specified by the software
manufacturer of the product.
INPUT=pcf-name Uses values from the specified product
configuration file.
OUTPUT=pcf-name Writes configuration choices to the specified
product configuration file. If no file
name is supplied, creates a file named
DEFAULT.PCSI$CONFIGURATION in the current
default directory.
The keywords CURRENT, PRODUCER, and INPUT are mutually exclusive.
(CURRENT is the default if none of these keywords is specified.)
The OUTPUT keyword can be used with the CURRENT, PRODUCER, or
INPUT keyword.
If you specify only one keyword, you can omit the parentheses.
3.3 /DEBUG
/DEBUG
/NODEBUG (default)
Specifies options useful to the product kit developer during kit
testing. Keywords are:
CONFLICT_DATA Displays supplemental information about file
and module conflict resolution. This includes
the generation numbers used in the comparison,
whether the object is retained or replaced,
and the name of the product that supplies the
object.
Use /DEBUG=CONFLICT_DATA in conjunction with the /LOG qualifier
to display all information about conflict resolution. For more
information, see the POLYCENTER Software Installation Utility
Developer's Guide.
3.4 /HELP
/HELP
/NOHELP (default)
Controls whether detailed explanations of product options and
informational text are displayed. The first time you install a
product, these explanations can help you decide which options to
select. When you perform subsequent installations or upgrades,
you might choose the brief explanations to save time.
When /NOHELP is selected, you can request a detailed explanation
about a question by performing one of the following actions at
the prompt:
o Press the Help key or PF2 key
o Type ? and press the Return key
3.5 /KIT_ATTRIBUTES
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT= Designates the format of the product kit as follows:
format-type
COMPRESSED Compressed format in which a data
compression technique has been applied
to a sequential kit. A compressed kit
has a .PCSI$COMPRESSED file type.
REFERENCE Reference format in which product
files exist in a directory tree. A
.PCSI$DESCRIPTION file in the top
level of the directory tree denotes a
reference kit.
SEQUENTIAL Sequential format in which product files
are placed in a container file. A file
type of .PCSI indicates a sequential
kit.
TYPE= Specifies the type of product kit as follows:
kit-type
FULL Layered product (application) software.
OPERATING_ Operating system software.
SYSTEM
PARTIAL An upgrade to currently installed
software. Installation of this kit
changes the version of the product.
PLATFORM An integrated set of software products
(also called a product suite).
3.6 /LOG
/LOG
/NOLOG (default)
Displays the file specification of each file processed. When
logging is enabled, messages notify you whenever product files,
libraries, directories, recovery data files, and product database
files are created, deleted, or modified. Information about any
file and module conflict resolution is also provided.
3.7 /OPTIONS
/OPTIONS=(keyword[,...])
/NOOPTIONS (default)
Specifies PRODUCT command options. The keywords are:
NOCONFIRM Omits the confirmation dialog that asks the user
to verify the products that have been selected
for the operation.
The NOCONFIRM and NODEFAULT_KIT keywords are
mutually exclusive.
NODEFAULT_KIT Directs the utility to query the user instead
of choosing a default kit when more than one
kit that matches the selection criteria for the
product is found in the source directory path.
The selection criteria include the producer,
base system, product name, and product version
strings that are embedded in the file name of a
kit.
If multiple kits are found for a selected
product, and NODEFAULT_KIT is not specified,
the utility determines the default kit to use by
applying the following rules:
1. The last character of the kit's file name
(1-7) is used to order the kits by kit type.
In descending order, the precedence is as
follows: full, operating system, partial,
patch, platform, transition, and mandatory
update.
2. The file type is used to order the kits
by format. In descending order, the
precedence is as follows: compressed
(.PCSI$COMPRESSED), sequential (.PCSI), and
reference (.PCSI$DESCRIPTION).
3. If multiple kits are found with the same
file name and file type, but differ in their
directory path names, the case of their file
specifications, or their file versions, then
the first file found by RMS search rules
takes precedence.
The NODEFAULT_KIT and NOCONFIRM keywords are
mutually exclusive.
NOVALIDATE_KIT Disables validation of software product kits
that are signed and have a manifest file in the
source directory.
The NOVALIDATE_KIT and SIGNED_KIT keywords are
mutually exclusive.
SHOW_DISK_USAGE Displays estimated disk block usage. Both peak
utilization and net change are shown in addition
to the amount of free space available before and
after the operation.
SIGNED_KIT Requires all software product kits selected for
the operation to be signed kits that have passed
validation; otherwise, the operation is not
performed.
The SIGNED_KIT and NOVALIDATE_KIT keywords are
mutually exclusive.
3.8 /PRODUCER
/PRODUCER=producer-name
Selects software products that the specified manufacturer
produces.
3.9 /RECOVERY_MODE
/RECOVERY_MODE (default)
/NORECOVERY_MODE
Enables or disables product reconfiguration in recovery mode. The
directories, files, and libraries that are modified or deleted
in the reconfiguration process are saved in a directory tree on
the system disk unless you specify /NORECOVERY_MODE. These files,
along with a copy of the product database, comprise the recovery
data set.
The recovery data set is handled somewhat differently when
a reconfiguration ends successfully or if it terminates
unsuccessfully.
o If a reconfiguration terminates in its execution phase, either
voluntarily (by using Ctrl/Y or Ctrl/C) or involuntarily
(because of a fatal error), the saved recovery data is used to
roll back all the displaced objects in an attempt to reinstate
the product environment prior to the interrupted operation.
Then the recovery data set is deleted.
o At the end of a successful reconfiguration, the recovery data
set is deleted.
3.10 /REMARK
/REMARK=string
Records a comment in the product database about the task you
are performing. The PRODUCT SHOW HISTORY command displays the
recorded comments. For each product, PCSI stores a chronological
list of tasks you perform and the associated remarks. The default
behavior is that no remark is recorded.
3.11 /REMOTE
/REMOTE
/NOREMOTE (default)
Selects the product database located on a privately mounted
system disk. By default, PCSI searches the currently booted
system disk for the product database.
When you use /REMOTE, the following logical names must be
defined:
o PCSI$SYSDEVICE must specify the physical disk name of the
target system disk. This disk must be mounted and allocated to
the process executing the PRODUCT command.
o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE.
It must be defined in the following form, where x is a valid
system root:
PCSI$SYSDEVICE:[SYSx.]
3.12 /SOURCE
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for
the software product kit or kits. If /SOURCE is not specified,
the utility searches in the location defined by the logical
name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE
qualifier is not specified, PCSI searches the current default
directory.
3.13 /SPAN_VERSIONS
/SPAN_VERSIONS=keyword([,...])
Selects software products whose versions match the specified
version criteria. The keywords are:
ABOVE=version Selects versions greater than the version
specified
BELOW=version Selects versions less than the version specified
MINIMUM=version Selects versions greater than or equal to the
version specified
MAXIMUM=version Selects versions less than or equal to the
version specified
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be
used alone or in combination. For example, /SPAN_VERSIONS=
(MINIMUM=V2.1,BELOW=V3.0) selects versions greater than or equal
to V2.1 and less than (but not including) V3.0. Using the MAXIMUM
keyword instead of BELOW would select versions that include V3.0.
3.14 /TRACE
/TRACE
/NOTRACE (default)
Identifies the creation and deletion of subprocesses and the DCL
commands and command procedures submitted to these subprocesses
for execution during the processing of the PRODUCT command.
Also shows the creation and deletion of scratch directories and
temporary files that the PCSI utility provides for the subprocess
environment. Any output that DCL produces is also displayed.
This qualifier is primarily a debugging aid for product
developers to trace the execution of command procedures included
in their product kits. See the POLYCENTER Software Installation
Utility Developer's Guide for more information.
3.15 /VERSION
/VERSION=version-number
Selects software products that have the specified version.
3.16 /WORK
/WORK=device:[directory]
Specifies the name of the device and directory acting as a
temporary work area. By default, temporary files are created
in subdirectories of the user's login directory.
4 – Example
$ DEFINE PCSI$SOURCE DKA500:[DWMOTIF.KIT]
$ PRODUCT RECONFIGURE DWMOTIF /VERSION=V1.2-3
The command in this example enters into a dialog with the user
to change the configuration options for the product DECwindows
Motif Version 1.2-3.