Library /sys$common/syshlp/helplib.hlb  —  PMDF  TEST  /FAX_ROUTING
    Test the effect on DATA_TO_BITMAP channel processing options of
    FAX routing mappings.

    Syntax

      PMDF TEST/FAX_ROUTING  [routing]

    Command Qualifiers             Defaults

    /DEBUG                         /NODEBUG
    /IMAGE_FILE=file-spec          /IMAGE_FILE=PMDF_CONFIG_DATA
    /MAPPING_FILE=file-spec        /MAPPING_FILE=PMDF_MAPPING_FILE

1  –  Restrictions 

    This utility is supplied only with the PMDF-FAX optional layered
    product.

2  –  Prompts 

    Routing:  routing

3  –  Parameters 

 routing

    Optional routing to test.

4  –  Description 

    TEST/FAX_ROUTING may be used to test entries in the FAX_ROUTING
    mapping tables used by the DATA_TO_BITMAP channel of PMDF-FAX.
    These entries are used to alter, on a per received FAX basis, the
    processing options used by that channel.

    The specified routing will be looked up in the FAX_ROUTING
    mapping table and, if found, the mapping result-a list of
    processing options for the DATA_TO_BITMAP channel-will be parsed.

    If a routing is specified on the command line, TEST/FAX_ROUTING
    acts upon the specified routing and then exits. If no routing is
    specified on the command line, then TEST/FAX_ROUTING will prompt
    for routings until a CTRL/Z is entered.

5  –  Command Qualifiers

5.1    /DEBUG 

       /DEBUG
       /NODEBUG (default)

    The testing process is capable of producing detailed processing
    information. The /DEBUG qualifier enables this output; it is
    disabled by default.

5.2    /IMAGE_FILE 

       /IMAGE_FILE[=filename]
       /NOIMAGE_FILE

    The /IMAGE_FILE qualifier serves two purposes. The first is when
    /NOIMAGE_FILE is specified; this instructs TEST/FAX_ROUTING to
    ignore any compiled configuration unconditionally and to read
    configuration information from the various text files instead.

    When the /IMAGE_FILE qualifier is specified without an optional
    file name, PMDF TEST/FAX_ROUTING will load the compiled
    configuration from the file PMDF_CONFIG_DATA. If, instead, a
    file name is specified then PMDF TEST/FAX_ROUTING will load the
    compiled configuration from the specified file.

5.3    /MAPPING_FILE 

       /MAPPING_FILE=filename

    TEST/FAX_ROUTING normally consults the default mapping file,
    PMDF_MAPPING_FILE, during processing. The /MAPPING_FILE qualifier
    specifies an alternate file to use in place of PMDF_MAPPING_FILE.

    This qualifier has no effect unless /NOIMAGE_FILE is specified
    or no compiled configuration exists; use of any compiled
    configuration will preclude reading any sort of mapping file.

6  –  Examples 

      The FAX_ROUTING table entry,

  6215319   /OUTPUT_AS=EMAIL/OUTPUT_FORMAT=DDIF/TO=dan@example/

      may be tested with this utility:

 $ PMDF TEST/FAX_ROUTING 6215319
 Processing options:
   OUTPUT_FORMAT      = DDIF
   PAGE_MAGNIFICATION = 0.95
   OUTPUT_AS          = EMAIL
   TO                 = dan@example
   SAVE_INPUT         = FALSE
Close Help