DBG$HELP.HLB  —  DEBUG  REBOOT
    (Alpha and Integrity servers only) When debugging operating
    system code with the OpenVMS System-Code Debugger, reboots the
    target machine running the operating system code and executes (or
    reexecutes) your system program.

    The REBOOT command, in other words, is similar to the RUN or
    RERUN commands when you are within the OpenVMS System-Code
    Debugger environment. (The OpenVMS System-Code Debugger is a
    kernel debugger that is activated through the OpenVMS Debugger.)

    Before you issue this command, you must create an Alpha or
    Integrity servers device driver, activate the OpenVMS System-
    Code Debugger,and use the CONNECT command that provides debugging
    capability.

    You must also have started the OpenVMS Debugger with the
    DEBUG/KEEP command.

    Format

      REBOOT

1  –  Description

    For complete information on using the OpenVMS System-Code
    Debugger, see the VSI OpenVMS System Analysis Tools Manual manual.

    Related commands:

       CONNECT
       DISCONNECT

2  –  Example

  DBG> REBOOT

      This command reboots the target machine where you will be
      debugging the OpenVMS operating system and reruns your program.
Close Help