SCACP>SHOW IP_INTERFACE/ALL The following is a snapshot of the output for SHOW IP_ INTERFACE/ALL command. SCACP>SHOW IP_INTERFACE/COUNTERS Displays IP interface counters. IP or LAN Device Error Data describes the IP/LAN device error data. Table 2 IP or LAN Device Error Data Data Description Bad SCSSYSTEM ID Received a packet with the wrong SCSSYSTEM ID in it. MC Msgs Directed Number of multicast packets directed to the to TR Layer NISCA Transport layer. Short CC Messages Number of packets received were short to Received contain a NISCA channel control header. Short DX Messages Number of packets received were short to Received contain a NISCA DX header for a LAN device. CH Allocation Number of times the system failed to allocate Failures memory for use as a channel structure in response to a packet received by this LAN device. VC Allocation Number of times the system failed to allocate Failures memory for use as a VC structure in response to a packet received by this LAN or IP device. Wrong Port Number of packets addressed to the wrong NISCA address (Invalid cluster group number). Port Disabled Number of packets discarded because the LAN or IP device was disabled. H/W Transmit Number of local hardware transmit errors. Errors Hello Transmit Number of transmit errors during HELLOs. Errors Last Transmit Reason for last transmit error. Error Reason Time of Last Time of last transmit error:date and time. Transmit Error For IP interfaces, the error count can increase for the following reasons. These errors will be displayed with any of the error codes. o The interface is unable to send data (SS$_SUSPENDED) o Link is disconnected (SS$_LINKDISCON)