/sys$common/syshlp/SCACP$HELP.HLB  —  SHOW  IP_INTERFACE
    Displays the PEdriver device IP interface data. Each device
    is an IP interface on the system, which can be used for NISCA
    communications.

    Format

      SHOW IP_INTERFACE  ipinterface

1  –  Parameter 

 ipinterfacename[,...]

    Includes one of more specific IP interface which you can use
    wildcards to specify.

    o  Use the /EXCLUDE qualifier to exclude IP interfaces.

    o  Use the SHOW IP_INTERFACE command to display device names.

2  –  Qualifiers

2.1    /ALL 

    Includes all IP interface data.

2.2    /COUNTERS 

    Includes device counter data maintained by PEdriver and counters.

2.3    /EXCLUDE 

       /EXCLUDE=(IP_INTERFACES[,...])

    Excludes specific IP devices, which you can use wildcards to
    specify.

2.4    /INTERVAL 

    For the /COUNTERS display, displays the changes to counters since
    the last SHOW command.

2.5    /n 

    Displays the nth page. To select a particular page of a multipage
    display, specify the number of the page you want to display.

2.6    /OUTPUT 

       /OUTPUT=filespec

    Creates the specified file and directs output to it.

2.7    /SDA 

    Includes IP interface data displayed in the SDA format with all
    the data collected in one display for an IP interface.

2.8    /SUMMARY 

    Includes IP interface summary data. This is the default if /ALL,
    /COUNTERS, and /SDA qualifiers are not specified.

3  –  Example 

  SCACP>SHOW IP_INTERFACE/ALL

      The following is a snapshot of the output for SHOW IP_
      INTERFACE/ALL command.

  SCACP>SHOW IP_INTERFACE/COUNTERS

      Displays IP interface counters.

    IP or LAN Device Error Data describes the IP/LAN device error
    data.

    Table 2 IP or LAN Device Error Data

    Data               Description

    Bad SCSSYSTEM ID   Received a packet with the wrong SCSSYSTEM ID
                       in it.
    MC Msgs Directed   Number of multicast packets directed to the
    to TR Layer        NISCA Transport layer.
    Short CC Messages  Number of packets received were short to
    Received           contain a NISCA channel control header.
    Short DX Messages  Number of packets received were short to
    Received           contain a NISCA DX header for a LAN device.
    CH Allocation      Number of times the system failed to allocate
    Failures           memory for use as a channel structure in
                       response to a packet received by this LAN
                       device.
    VC Allocation      Number of times the system failed to allocate
    Failures           memory for use as a VC structure in response
                       to a packet received by this LAN or IP device.
    Wrong Port         Number of packets addressed to the wrong NISCA
                       address (Invalid cluster group number).
    Port Disabled      Number of packets discarded because the LAN or
                       IP device was disabled.
    H/W Transmit       Number of local hardware transmit errors.
    Errors
    Hello Transmit     Number of transmit errors during HELLOs.
    Errors
    Last Transmit      Reason for last transmit error.
    Error Reason
    Time of Last       Time of last transmit error:date and time.
    Transmit Error

    For IP interfaces, the error count can increase for the following
    reasons. These errors will be displayed with any of the error
    codes.

    o  The interface is unable to send data (SS$_SUSPENDED)

    o  Link is disconnected (SS$_LINKDISCON)
Close Help