Displays SAS PHY information for all connections in the SAS
    Controller.

    Format

      SHOW PHY  [phy_id]

1  –  Parameters

 phy_id

    Display information about a specific SAS PHY ID. (Use the SAS
    command SHOW DISK to display SAS PHY IDs.)

    If a PHY ID is not specified, the utility displays all available
    PHYs on the SAS Controller.

2  –  Qualifiers

2.1    /ERROR

    Displays SAS PHY error counters.

2.2    /FULL

    Displays additional information about the PHYs.

3  –  Example

     SAS> SHOW PHY 0

  PHY 0
          OwnerDev                : 1
          SAS WWID                : 5000C500-003306B1
          DevHandle               : 9
          PhyIdentifier           : 0
          Device Info             SSP Target   Direct Attached
          Flag                    SGPIO DA Enclosure present.
          PHY Info                3.0Gbps speed
  SAS>

      This example shows the SAS PHY connection for PHY 0.